On Mon, Jan 13, 2020 at 10:15:21AM +0100, Marco Felsch wrote:
> The restart handler is executed during the shutdown phase which is
> atomic/irq-less. The i2c framework supports atomic transfers since
> commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic
> transfers") but unfortunately the regmap framework doesn't support it
> yet. Hard coding the i2c stuff can be done without worries since the
> DA9062 is an i2c-only device.
>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> Hi,
>
> This patch is based on Stefan Lengfeld's RFC Patch [1].
>
> [1] https://patchwork.ozlabs.org/patch/1085942/
> ---
> drivers/watchdog/da9062_wdt.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
> index c9b9d6394525..84c5a0a455b2 100644
> --- a/drivers/watchdog/da9062_wdt.c
> +++ b/drivers/watchdog/da9062_wdt.c
> @@ -11,6 +11,7 @@
> #include <linux/platform_device.h>
> #include <linux/uaccess.h>
> #include <linux/slab.h>
> +#include <linux/i2c.h>
> #include <linux/delay.h>
> #include <linux/jiffies.h>
> #include <linux/mfd/da9062/registers.h>
> @@ -149,12 +150,18 @@ static int da9062_wdt_restart(struct watchdog_device *wdd, unsigned long action,
> void *data)
> {
> struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
> + struct i2c_client *client = to_i2c_client(wdt->hw->dev);
> + u8 buf[] = {DA9062AA_CONTROL_F, DA9062AA_SHUTDOWN_MASK};
> + struct i2c_msg msg = {
> + .addr = client->addr,
> + .flags = 0,
> + .len = sizeof(buf),
> + .buf = buf,
> + };
> int ret;
>
> - ret = regmap_write(wdt->hw->regmap,
> - DA9062AA_CONTROL_F,
> - DA9062AA_SHUTDOWN_MASK);
> - if (ret)
> + ret = i2c_transfer(client->adapter, &msg, 1);
Why not i2c_smbus_write_byte_data() ? I don't immediately see the difference.
Guenter
> + if (ret < 0)
> dev_alert(wdt->hw->dev, "Failed to shutdown (err = %d)\n",
> ret);
>
> --
> 2.20.1
>
