Linux USB Users

• Thread Index

• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: "Michael G. Katzmann" <michaelk@xxxxxxxx>
• Re: [PATCH] usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH] usbip: fix vhci races in connection tear down
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] thunderbolt: debugfs: Show all accessible dwords
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: tcpci_maxim: configure charging & data paths
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH][next] usb: mtu3: Fix spelling mistake "disabed" -> "disabled"
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH v4] USB: serial: cp210x: Make the CP210x driver work with GPIOs of CP2108
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH RESEND v3 0/5] media: uvcvideo: Fix race conditions
  • From: Dominique MARTINET <dominique.martinet@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: tcpci: Add tcpc chip level callbacks
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: tcpci_maxim: configure charging & data paths
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: tcpci_maxim: configure charging & data paths
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: tcpci: Add tcpc chip level callbacks
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: tcpci: Add tcpc chip level callbacks
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] usbip fixes to crashes found by syzbot
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: tcpci_maxim: configure charging & data paths
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v2 1/2] usb: typec: tcpci: Add tcpc chip level callbacks
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH 3/4] usb: typec: tcpci_maxim: configure charging & data paths
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH] usbip: fix vhci races in connection tear down
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Remove invalid low-speed setting
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS d26c00e7276fc92b18c253d69e872f6b03832bad
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
• [PATCH v3] usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH v2] usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Ilia Mirkin <imirkin@xxxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH 2/2] drivers: usb: host: fotg210-hcd.c: Fix alignment of comment
  • From: Shubhankar Kuranagatti <shubhankarvk@xxxxxxxxx>
• [PATCH 1/2] drivers: usb: host: fotg210-hcd.c: Fix indentation error
  • From: Shubhankar Kuranagatti <shubhankarvk@xxxxxxxxx>
• Re: [PATCH][next] usbip: Fix incorrect double assignment to udc->ud.tcp_rx
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] init/initramfs.c: allow asynchronous unpacking
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH] USB: serial: cp210x: Improve wording in some comments
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 4/5] USB: serial: pl2303: tighten type HXN (G) detection
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/5] USB: serial: pl2303: clean up type detection
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 0/5] USB: serial: pl2303: amend device-type detection
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/5] USB: serial: pl2303: amend and tighten type detection
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 3/5] USB: serial: pl2303: rename legacy PL2303H type
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 5/5] USB: serial: pl2303: add device-type names
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] usb/usbtmc: Remove a redundant kref_put in usbtmc_disconnect
  • From: Lv Yunlong <lyl2019@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: Query on USB error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][next] usbip: Fix incorrect double assignment to udc->ud.tcp_rx
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] CDC-ACM: downgrade message to debug
  • From: Bruno Thomsen <bruno.thomsen@xxxxxxxxx>
• [PATCH] cdc-acm: fix BREAK rx code path adding necessary calls
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usb: typec: tcpci_maxim: configure charging & data paths
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] usbip fixes to crashes found by syzbot
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: serial: cp210x: Improve wording in some comments
  • From: Klemen Košir <klemen.kosir@xxxxxxxx>
• Re: [PATCH] usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 1/2] cdc-acm: untangle a circular dependency between callback and softint
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH 2/2] CDC-ACM: downgrade message to debug
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH 2/2] CDC-ACM: downgrade message to debug
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH 1/2] cdc-acm: untangle a circular dependency between callback and softint
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH 0/2] CDC-ACM: fix circular dependency
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 0/6] usbip fixes to crashes found by syzbot
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
  • From: Elias Rudberg <mail@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] usbip fixes to crashes found by syzbot
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressing
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 1/4] usb: xhci: do not perform Soft Retry for some xHCI hosts
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 4/4] xhci: Fix repeated xhci wake after suspend due to uncleared internal wake state
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 0/4] xhci fixes for usb-linus
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 2/4] xhci: Improve detection of device initiated wake signal.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: configfs: Fix KASAN use-after-free
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxx>
• [PATCH][next] usbip: Fix incorrect double assignment to udc->ud.tcp_rx
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH 3/4] usb: typec: tcpci_maxim: configure charging & data paths
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH 4/4] dt-bindings: usb: Add chg-psy-name property Maxim 33359 binding
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH 2/4] usb: typec: tcpci: Add tcpc chip level callbacks
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH 1/4] usb: typec: tcpm: Add callback to notify pd_capable partner
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH] Revert "usb: dwc3: qcom: Constify the software node"
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v4 2/2] staging: Add driver for XillyUSB (Xillybus variant for USB)
  • From: eli.billauer@xxxxxxxxx
• [PATCH v4 1/2] char: xillybus: Move class-related functions to new xillybus_class.c
  • From: eli.billauer@xxxxxxxxx
• [PATCH v4 0/2] Submission of XillyUSB driver
  • From: eli.billauer@xxxxxxxxx
• [PATCH][next] usb: mtu3: Fix spelling mistake "disabed" -> "disabled"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "usb: dwc3: qcom: Constify the software node"
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [GIT PULL] USB-serial fixes for 5.12-rc3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Revert "usb: dwc3: qcom: Constify the software node"
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: skip interconnect init for ACPI probe
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [GIT PULL] USB-serial fixes for 5.12-rc3
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: skip interconnect init for ACPI probe
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v1] usb: typec: tcpci: Refactor tcpc_presenting_cc1_rd macro
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] thunderbolt: Add details to router uevent
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 46613c9dfa964c0c60b5385dbdf5aaa18be52a9c
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4] usb: gadget: configfs: Fix KASAN use-after-free
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH v4] usb: gadget: configfs: Fix KASAN use-after-free
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [usb-storage] Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Matthias Schwarzott <zzam@xxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: skip interconnect init for ACPI probe
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 3/8] usb: core: hub: Print speed name based on ssp rate
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 8/8] usb: xhci: Remove unused function
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 5/8] usb: xhci: Init root hub SSP rate
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 6/8] usb: xhci: Fix port minor revision
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 7/8] usb: xhci: Rewrite xhci_create_usb3_bos_desc()
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 4/8] usb: core: sysfs: Check for SSP rate in speed attr
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 2/8] usb: core: hub: Remove port_speed_is_ssp()
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 3/8] usb: core: hub: Print speed name based on ssp rate
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 1/8] usb: core: Track SuperSpeed Plus GenXxY
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v3 0/8] usb: Check for genXxY on host
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: usb: fix yamllint check warning
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH v1] usb: typec: tcpci: Refactor tcpc_presenting_cc1_rd macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: cdc-acm cooldown + Cisco 2960-X = kernel warning + dead USB
  • From: "Ramsay, Lincoln" <Lincoln.Ramsay@xxxxxxxx>
• [PATCH v1] usb: typec: tcpci: Refactor tcpc_presenting_cc1_rd macro
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 60a35ba9141f06b67150ce3544bc595d049b0d83
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Query on USB error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Matthias Schwarzott <zzam@xxxxxxxxxx>
• RE: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 0/6] usbip fixes to crashes found by syzbot
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• RE: [PATCH 1/3] thunderbolt: Add details to router uevent
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxxx>
• RE: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxxx>
• Re: [bug report] usb: cdns3: add power lost support for system resume
  • From: Frank Li <frank.li@xxxxxxx>
• [PATCH 1/1] usb: cdns3: fix static checker warning.
  • From: Frank Li <lznuaa@xxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Prevent EP queuing while stopping transfers
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [PATCH] usb: f_uac2: adds support for SS and SSP
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH 3/3] usb: typec: tipd: Separate file for tracepoint creation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 1/3] usb: typec: tps6598x: Fix tracepoint header file
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/3] usb: typec: tps6598x: Move the driver under its own subdirectory
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 0/3] usb: typec: tps6598x: Move the driver under its own directory
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH -next v2] usb: cdns3: imx: mark cdns_imx_system_resume as __maybe_unused
  • From: "'Wei Yongjun" <weiyongjun1@xxxxxxxxxx>
• [Bug 212045] dwc2 gadget mode read call blocks
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [bug report] usb: cdns3: add power lost support for system resume
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: cdc-acm cooldown + Cisco 2960-X = kernel warning + dead USB
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: usb: fix yamllint check warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: cdc-acm cooldown + Cisco 2960-X = kernel warning + dead USB
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2 3/8] usb: core: hub: Print speed name based on ssp rate
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 7/8] usb: xhci: Rewrite xhci_create_usb3_bos_desc()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [kbuild] Re: [PATCH v3 1/2] char: xillybus: Move class-related functions to new xillybus_class.c
  • From: Eli Billauer <eli.billauer@xxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• RE: [PATCH] usb: gadget: uvc: add bInterval checking for HS mode
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• RE: [PATCH] usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH v2 2/2] usb: webcam: Invalid size of Processing Unit Descriptor
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: usb: fix yamllint check warning
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• RE: [PATCH] usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: usb: fix yamllint check warning
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 58f3367b2359e88b83bcfca5b77d48b609eb2123
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: cdc-acm cooldown + Cisco 2960-X = kernel warning + dead USB
  • From: "Ramsay, Lincoln" <Lincoln.Ramsay@xxxxxxxx>
• Re: USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242
  • From: William Allen <william.allentx@xxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS bebccc4bc6585c04be862db92631aab8c161bc8c
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 7/8] usb: xhci: Rewrite xhci_create_usb3_bos_desc()
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v6 3/5] of/platform: Add stubs for of_platform_device_create/destroy()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [kbuild] Re: [PATCH v3 1/2] char: xillybus: Move class-related functions to new xillybus_class.c
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [usb-storage] Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] usb: cdns3: imx: mark cdns_imx_resume as __maybe_unused
  • From: "weiyongjun (A)" <weiyongjun1@xxxxxxxxxx>
• Re: [PATCH -next] usb: cdns3: imx: mark cdns_imx_resume as __maybe_unused
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci-tegra: fix Kconfig depencies
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 1/3] thunderbolt: Add details to router uevent
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] thunderbolt: Hide authorized attribute if router does not support PCIe tunnels
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] thunderbolt: Add details to router uevent
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 3/3] thunderbolt: Expose more details about USB 3.x and DisplayPort tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 0/3] thunderbolt: Expose details about tunneling
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 2/3] thunderbolt: Hide authorized attribute if router does not support PCIe tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• Re: [PATCH] xhci: Remove unused value len from xhci_unmap_temp_buf
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH -next] usb: cdns3: imx: mark cdns_imx_resume as __maybe_unused
  • From: "'Wei Yongjun" <weiyongjun1@xxxxxxxxxx>
• Re: cdc-acm cooldown + Cisco 2960-X = kernel warning + dead USB
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH robh next] dt-bindings: usb: add USB controller port
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• RE: [PATCH] usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v2 7/8] usb: xhci: Rewrite xhci_create_usb3_bos_desc()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v3 1/2] char: xillybus: Move class-related functions to new xillybus_class.c
  • From: eli.billauer@xxxxxxxxx
• [PATCH v3 2/2] staging: Add driver for XillyUSB (Xillybus variant for USB)
  • From: eli.billauer@xxxxxxxxx
• [PATCH v3 0/2] Submission of XillyUSB driver
  • From: eli.billauer@xxxxxxxxx
• Re: [PATCH] thunderbolt: debugfs: Show all accessible dwords
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] usb: cdns3: Optimize DMA request buffer allocation
  • From: Sanket Parmar <sparmar@xxxxxxxxxxx>
• Re: [PATCH] thunderbolt: debugfs: Show all accessible dwords
  • From: Yehezkel Bernat <yehezkelshb@xxxxxxxxx>
• Re: [PATCH 2/2] usb: cdns3: Optimize DMA request buffer allocation
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• RE: [PATCH 2/2] usb: cdns3: Optimize DMA request buffer allocation
  • From: Sanket Parmar <sparmar@xxxxxxxxxxx>
• Re: [PATCH 2/2] usb: cdns3: Optimize DMA request buffer allocation
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH] thunderbolt: debugfs: Show all accessible dwords
  • From: Gil Fine <gil.fine@xxxxxxxxx>
• Re: [PATCH] usb: cdns3: Coherent memory allocation optimization
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242
  • From: William Allen <william.allentx@xxxxxxxxx>
• Re: [PATCH v3 1/2] usb: dwc3: Trigger a GCTL soft reset when switching modes in DRD
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• RE: [PATCH] usb: cdns3: Coherent memory allocation optimization
  • From: Sanket Parmar <sparmar@xxxxxxxxxxx>
• [PATCH 2/2] usb: cdns3: Optimize DMA request buffer allocation
  • From: Sanket Parmar <sparmar@xxxxxxxxxxx>
• [PATCH 1/2] usb: cdns3: Use dma_pool_* api to alloc trb pool
  • From: Sanket Parmar <sparmar@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] usb: dwc3: Trigger a GCTL soft reset when switching modes in DRD
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS a14ecf9f692a8f460d26935c7e8bdb77ed6c918b
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 7f6f181b3e2c4d08f5d693eebe7901a28fab8666
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] usb: dwc3: gadget: Use max speed if unspecified
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 1/2] usb: dwc3: gadget: Set gadget_max_speed when set ssp_rate
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH 0/2] usb: dwc3: gadget: Fix ssp speed setting
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v6 3/5] of/platform: Add stubs for of_platform_device_create/destroy()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Matthias Schwarzott <zzam@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tcpm: turn tcpm_ams_finish into void function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1] usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 16/18] usb: common: add function to get interval expressed in us unit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 18/18] usb: common: move function's kerneldoc next to its definition
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [input]: hid-cp2112: fix multiple gpiochips
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: A question about UAS
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [PATCH] usb: gadget: uvc: add bInterval checking for HS mode
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH v2] usb: gadget: uvc: add bInterval checking for HS mode
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH -next] usb: typec: stusb160x: fix return value check in stusb160x_probe()
  • From: Amelie DELAUNAY <amelie.delaunay@xxxxxxxxxxx>
• Re: [PATCH 1/2] thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 15/17] usb: xhci-mtk: support to build xhci-mtk-hcd.ko
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/18] usb: xhci-mtk: support to build xhci-mtk-hcd.ko
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH -next] usb: typec: stusb160x: fix return value check in stusb160x_probe()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH -next] usb: typec: tps6598x: Fix return value check in tps6598x_probe()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tcpm: turn tcpm_ams_finish into void function
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: gadget: uvc: Updating bcdUVC field to 0x0110
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH 2/2] usb: webcam: Invalid size of Processing Unit Descriptor
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: usb: cdc-acm: BUG kmalloc-128 Poison overwritten
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH -next] usb: typec: stusb160x: fix return value check in stusb160x_probe()
  • From: "'Wei Yongjun" <weiyongjun1@xxxxxxxxxx>
• [PATCH -next] usb: typec: tps6598x: Fix return value check in tps6598x_probe()
  • From: "'Wei Yongjun" <weiyongjun1@xxxxxxxxxx>
• Re: [PATCH] usb: typec: tcpm: turn tcpm_ams_finish into void function
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: usb: cdc-acm: BUG kmalloc-128 Poison overwritten
  • From: Bruno Thomsen <bruno.thomsen@xxxxxxxxx>
• RE: [PATCH] usb: gadget: uvc: add bInterval checking for HS mode
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• RE: [PATCH] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH v2] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH v2] usb: typec: tcpm: turn tcpm_ams_finish into void function
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: tcpm: turn tcpm_ams_finish into void function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] usb: typec: tcpm: turn tcpm_ams_finish into void function
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• [PATCH v4 06/12] arm64: dts: mediatek: mt2712: harmonize node names
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 09/12] arm64: dts: mediatek: mt8183: fix dtbs_check warning
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 12/12] arm: dts: mt2701: harmonize node names and compatibles
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 05/12] arm64: dts: mediatek: mt8173: fix dtbs_check warning
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 11/12] arm: dts: mt7623: harmonize node names and compatibles
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 10/12] arm: dts: mt7629: harmonize node names and compatibles
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 08/12] arm64: dts: mediatek: mt7622: harmonize node names and compatibles
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 02/12] dt-bindings: phy: mediatek: dsi-phy: modify compatible dependence
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 04/12] dt-bindings: phy: mediatek: tphy: change patternProperties
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 03/12] dt-bindings: phy: mediatek: hdmi-phy: modify compatible items
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 01/12] dt-bindings: usb: fix yamllint check warning
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v4 07/12] arm64: dts: mediatek: mt8516: harmonize node names and compatibles
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 6/6] usbip: fix vudc usbip_sockfd_store races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/6] usbip fixes to crashes found by syzbot
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] usbip: fix stub_dev to check for stream socket
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] usbip: fix vudc to check for stream socket
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] usbip: fix vhci_hcd attach_store() races leading to gpf
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] usbip: fix vhci_hcd to check for stream socket
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 18/18] usb: common: move function's kerneldoc next to its definition
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 17/18] usb: xhci-mtk: print debug info of endpoint interval
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 16/18] usb: common: add function to get interval expressed in us unit
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 15/18] usb: xhci-mtk: support to build xhci-mtk-hcd.ko
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 14/18] usb: xhci-mtk: remove declaration of xhci_mtk_setup()
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 11/18] usb: xhci-mtk: use @tt_info to check the FS/LS device is under a HS hub
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 10/18] usb: xhci-mtk: add a member @speed in mu3h_sch_ep_info struct
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 09/18] usb: xhci-mtk: use clear type instead of void
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 13/18] usb: xhci-mtk: add some schedule error number
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 12/18] usb: xhci-mtk: rebuild the way to get bandwidth domain
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 06/18] usb: xhci-mtk: add a function to (un)load bandwidth info
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 08/18] usb: xhci-mtk: remove unnecessary members of mu3h_sch_tt struct
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 01/18] usb: xhci-mtk: remove or operator for setting schedule parameters
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 07/18] usb: xhci-mtk: add a function to get bandwidth boundary
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 04/18] usb: xhci-mtk: add only one extra CS for FS/LS INTR
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 03/18] usb: xhci-mtk: get the microframe boundary for ESIT
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 05/18] usb: xhci-mtk: use @sch_tt to check whether need do TT schedule
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH v2 02/18] usb: xhci-mtk: improve bandwidth scheduling with TT
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH 16/17] usb: common: add function to get interval expressed in us unit
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH 16/17] usb: common: add function to get interval expressed in us unit
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH 03/17] usb: xhci-mtk: get the microframe boundary for ESIT
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH] usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] usb: dwc3: Trigger a GCTL soft reset when switching modes in DRD
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [Bug 212113] New: USB stops working few minutes seemingly after specific actions on the PC
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] Add unusal uas devices reported by Umbrel users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Matthias Schwarzott <zzam@xxxxxxxxxx>
• Re: [PATCH] Add unusal uas devices reported by Umbrel users
  • From: Aaron Dewes <aaron.dewes@xxxxxx>
• Re: [PATCH v2] Add unusal uas devices reported by Umbrel users
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 15/17] usb: xhci-mtk: support to build xhci-mtk-hcd.ko
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] Add unusal uas devices reported by Umbrel users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] Add unusal uas devices reported by Umbrel users
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] Add unusal uas devices reported by Umbrel users
  • From: Aaron Dewes <aaron.dewes@xxxxxx>
• Re: [PATCH] Add unusal uas devices reported by Umbrel users
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Add unusal uas devices reported by Umbrel users
  • From: Aaron Dewes <aaron.dewes@xxxxxx>
• [Bug 212101] New: xhci_hcd cant setup
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH 1/1] usb: cdns3: trace: delete the trace parameter for request->trb
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• [PATCH] usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [PATCH resend] usb: gadget: legacy: fix error return code of msg_bind()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [PATCH] usb: gadget: legacy: fix error return code of msg_bind()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [PATCH] usb: gadget: legacy: fix error return code of multi_bind()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Matthias Schwarzott <zzam@xxxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: "Michael G. Katzmann" <michaelk@xxxxxxxx>
• Re: [PATCH] xhci: Remove unused value len from xhci_unmap_temp_buf
  • From: Zhangkun <zhangkun4jr@xxxxxxx>
• Re: [PATCH v3 1/2] usb: dwc3: Trigger a GCTL soft reset when switching modes in DRD
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: dwc3: Fix DRD mode change sequence following programming guide
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: "Michael G. Katzmann" <michaelk@xxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: usb: generic-ehci: document spurious-oc flag
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/5] dt-bindings: usb: Add binding for Realtek RTS5411 hub controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v6 1/5] dt-bindings: usb: Add binding for Realtek RTS5411 hub controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: A question about UAS
  • From: Greg KH <greg@xxxxxxxxx>
• Re: A question about UAS
  • From: Aaron Dewes <aaron.dewes@xxxxxx>
• Re: A question about UAS
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v2] usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: A question about UAS
  • From: Aaron Dewes <aaron.dewes@xxxxxx>
• Re: [PATCH 2/2 v2] usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: A question about UAS
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: A question about UAS
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• A question about UAS
  • From: Aaron Dewes <aaron.dewes@xxxxxx>
• Re: [PATCH] xhci: Remove unused value len from xhci_unmap_temp_buf
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v2] usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 1/2 V2] usb: gadget: s3c: Fix incorrect resources releasing
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2 v2] usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 1/2 V2] usb: gadget: s3c: Fix incorrect resources releasing
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] xhci: Remove unused value len from xhci_unmap_temp_buf
  • From: zhangkun4jr@xxxxxxx
• Re: [PATCH v3 1/2] usb: dwc3: Trigger a GCTL soft reset when switching modes in DRD
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: dwc3: Fix DRD mode change sequence following programming guide
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v1 2/2] usb: cdns3: imx: add power lost support for system resume
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH] usb: cdns3: Coherent memory allocation optimization
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• [PATCH v6 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 4/5] usb: host: xhci-plat: Create platform device for onboard hubs in probe()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 3/5] of/platform: Add stubs for of_platform_device_create/destroy()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 2/5] USB: misc: Add onboard_usb_hub driver
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 0/5] USB: misc: Add onboard_usb_hub driver
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: usb: Add binding for Realtek RTS5411 hub controller
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: Amazon Kindle disconnect after Synchronize Cache
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: usb: add analogix,anx7688.yaml
  • From: Ondřej Jirman <megous@xxxxxxxxxx>
• Amazon Kindle disconnect after Synchronize Cache
  • From: Matthias Schwarzott <zzam@xxxxxxxxxx>
• [PATCH v7 0/3] GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v7 1/3] drm/uapi: Add USB connector type
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v7 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v7 2/3] drm/probe-helper: Check epoch counter in output_poll_execute()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: cdns3: Coherent memory allocation optimization
  • From: Sanket Parmar <sparmar@xxxxxxxxxxx>
• Re: [PATCH 16/17] usb: common: add function to get interval expressed in us unit
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: kworker takes 100% core after unplugging usb c hub
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/17] usb: common: add function to get interval expressed in us unit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: usb: add analogix,anx7688.yaml
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] drm/bridge: anx7688: Add ANX7688 bridge driver support
  • From: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: usb: add analogix,anx7688.yaml
  • From: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
• Re: [PATCH v4 00/12] usb: usbip: serialize attach/detach operations
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [syzbot] WARNING in carl9170_usb_send_rx_irq_urb/usb_submit_urb
  • From: syzbot <syzbot+0ae4804973be759fa420@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2] USB: serial: cp210x: Make the CP210x driver work with GPIOs of CP2108
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [Bug 212045] dwc2 gadget mode read call blocks
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH -next] USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v4 00/12] usb: usbip: serialize attach/detach operations
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: s3c: Fix incorrect resources releasing
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: cp210x: Make the CP210x driver work with GPIOs of CP2108
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: serial: io_edgeport: fix memory leak in edge_startup
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: Charles Yeh <charlesyeh522@xxxxxxxxx>
• [Bug 212045] dwc2 gadget mode read call blocks
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v3] USB: serial: ch341: add new Product ID
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 03/17] usb: xhci-mtk: get the microframe boundary for ESIT
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/17] usb: xhci-mtk: get the microframe boundary for ESIT
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: kworker takes 100% core after unplugging usb c hub
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 16/17] usb: common: add function to get interval expressed in us unit
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 15/17] usb: xhci-mtk: support to build xhci-mtk-hcd.ko
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 12/17] usb: xhci-mtk: rebuild the way to get bandwidth domain
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 17/17] usb: xhci-mtk: print debug info of endpoint interval
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 04/17] usb: xhci-mtk: add only one extra CS for FS/LS INTR
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 13/17] usb: xhci-mtk: add some schedule error number
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 11/17] usb: xhci-mtk: use @tt_info to check the FS/LS device is under a HS hub
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 14/17] usb: xhci-mtk: remove declaration of xhci_mtk_setup()
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 06/17] usb: xhci-mtk: add a function to (un)load bandwidth info
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 10/17] usb: xhci-mtk: add a member @speed in mu3h_sch_ep_info struct
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 08/17] usb: xhci-mtk: remove unnecessary members of mu3h_sch_tt struct
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 09/17] usb: xhci-mtk: use clear type instead of void
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 05/17] usb: xhci-mtk: use @sch_tt to check whether need do TT schedule
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 03/17] usb: xhci-mtk: get the microframe boundary for ESIT
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 07/17] usb: xhci-mtk: add a function to get bandwidth boundary
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 01/17] usb: xhci-mtk: remove or operator for setting schedule parameters
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 02/17] usb: xhci-mtk: improve bandwidth scheduling with TT
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH -next] USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ANDROID: usb: core: Send uevent when USB TOPO layer over 6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ANDROID: usb: core: Send uevent when USB TOPO layer over 6
  • From: Chien Kun Niu <rickyniu@xxxxxxxxxx>
• RE: [PATCH] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH] usb: cdnsp: Fixes incorrect value in ISOC TRB
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH -next] USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
  • From: "'Wei Yongjun" <weiyongjun1@xxxxxxxxxx>
• cdc-acm cooldown + Cisco 2960-X = kernel warning + dead USB
  • From: "Ramsay, Lincoln" <Lincoln.Ramsay@xxxxxxxx>
• Re: [PATCH 1/1] net: usb: qmi_wwan: allow qmimux add/del with master up
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v2 1/2] dt-bindings: usb: misc: Add binding for Microchip usb5744 hub
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net] net: usb: cdc_ncm: don't spew notifications
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: [PATCH 1/1] net: usb: qmi_wwan: allow qmimux add/del with master up
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/2] usb: dwc3: add a power supply for current control
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Re: kworker takes 100% core after unplugging usb c hub
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: kworker takes 100% core after unplugging usb c hub
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/12] usb: usbip: serialize attach/detach operations
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 04/12] usb: usbip: stub: serialize usbip_sockfd_store() against event_handler()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 06/12] usb: usbip: fix error handling of kthread_get_run()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 00/12] usb: usbip: serialize attach/detach operations
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 12/12] usb: usbip: remove unused kthread_get_run()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 01/12] usb: usbip: introduce usbip_event_mutex for serialization
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 02/12] usb: usbip: vhci: serialize attach_store()/detach_store() against event_handler()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 09/12] usb: usbip: vhci: add automatic recovery to attach_store()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 07/12] usb: usbip: preallocate kernel threads for consistent attach operation
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 10/12] usb: usbip: vudc: add automatic recovery to usbip_sockfd_store()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 08/12] usb: usbip: check that stream socket is used
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 03/12] usb: usbip: vudc: serialize usbip_sockfd_store() against event_handler()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 05/12] usb: usbip: don't reset tcp_socket at vhci_device_reset()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 11/12] usb: usbip: stub: add automatic recovery to usbip_sockfd_store()
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in carl9170_usb_submit_cmd_urb/usb_submit_urb
  • From: syzbot <syzbot+9468df99cb63a4a4c4e1@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] net: usb: qmi_wwan: allow qmimux add/del with master up
  • From: Daniele Palmas <dnlplm@xxxxxxxxx>
• Re: next/master bisection: baseline.login on rk3399-gru-kevin
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 06/18] thunderbolt: Do not re-establish XDomain DMA paths automatically
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 16/18] thunderbolt: Add KUnit tests for DMA tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 18/18] thunderbolt: Add support for USB4 DROM
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 17/18] thunderbolt: Check quirks in tb_switch_add()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 08/18] thunderbolt: Align XDomain protocol timeouts with the spec
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 15/18] thunderbolt: Add KUnit tests for XDomain properties
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 11/18] thunderbolt: Use dedicated flow control for DMA tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 10/18] thunderbolt: Add support for maxhopid XDomain property
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 13/18] thunderbolt: Allow multiple DMA tunnels over a single XDomain connection
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 03/18] thunderbolt: Decrease control channel timeout for software connection manager
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 02/18] thunderbolt: Do not pass timeout for tb_cfg_reset()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 12/18] thunderbolt: Drop unused tb_port_set_initial_credits()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 09/18] thunderbolt: Add tb_property_copy_dir()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 14/18] net: thunderbolt: Align the driver to the USB4 networking spec
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 05/18] thunderbolt: Add more logging to XDomain connections
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 07/18] thunderbolt: Use pseudo-random number as initial property block generation
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 00/18] thunderbolt: Align with USB4 inter-domain and DROM specs
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 04/18] Documentation / thunderbolt: Drop speed/lanes entries for XDomain
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 01/18] thunderbolt: Disable retry logic for intra-domain control packets
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: next/master bisection: baseline.login on rk3399-gru-kevin
  • From: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
• [PATCH] usb: gadget: uvc: add bInterval checking for HS mode
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• [PATCH] USB: serial: cp210x: Make the CP210x driver work with GPIOs of CP2108
  • From: Pho Tran <Pho.Tran@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: Flip condition guarding power_supply_put()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] an additional path to control charging current
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v1] usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH] USB: usblp: fix a hang in poll() if disconnected
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: liulongfang <liulongfang@xxxxxxxxxx>
• [PATCH] usb: usb-mx2: Remove unused file
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH net] Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [Bug 212045] New: dwc2 gadget mode read call blocks
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] usb: dwc3: Fix dereferencing of null dwc->usb_psy
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• [usb:usb-testing] BUILD REGRESSION 5e17812c22bcd65fa9202595eef4bbf8fa814144
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-testing 1/22] core.c:undefined reference to `power_supply_get_by_name'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: Fix dereferencing of null dwc->usb_psy
  • From: Heiko Thiery <heiko.thiery@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] usb: dwc3: Flip condition guarding power_supply_put()
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] usb: dwc3: Fix dereferencing of null dwc->usb_psy
  • From: Ray Chi <raychi@xxxxxxxxxx>
• Re: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 0/2] an additional path to control charging current
  • From: Heiko Thiery <heiko.thiery@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] an additional path to control charging current
  • From: Heiko Thiery <heiko.thiery@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: taehyun cho <taehyun.cho@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/2] thunderbolt: Increase runtime PM reference count on DP tunnel discovery
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/2] thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] usb: dwc3: core: don't enable wakeup for runtime PM
  • From: Li Jun <jun.li@xxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: document usb_psy in struct dwc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hcd: remove unused including <linux/version.h>
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: hcd: remove unused including <linux/version.h>
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Patch v2] usb: dwc3: document usb_psy in struct dwc3
  • From: Ray Chi <raychi@xxxxxxxxxx>
• 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: "Zhang, Qiang" <Qiang.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH] usb: hcd: remove unused including <linux/version.h>
  • From: "tiantao (H)" <tiantao6@xxxxxxxxxx>
• Re: [PATCH] ANDROID: usb: core: Send uevent when USB TOPO layer over 6
  • From: Chien Kun Niu <rickyniu@xxxxxxxxxx>
• [Patch v3] usb: dwc3: document usb_psy in struct dwc3
  • From: Ray Chi <raychi@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: Fix dereferencing of null dwc->usb_psy
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] ANDROID: usb: core: Send uevent when USB TOPO layer over 6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] usb: dwc3: document usb_psy in struct dwc3
  • From: Ray Chi <raychi@xxxxxxxxxx>
• 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: "Zhang, Qiang" <Qiang.Zhang@xxxxxxxxxxxxx>
• [PATCH v2] usb: dwc3: qcom: Honor wakeup enabled/disabled state
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [Bug 207045] uvcvideo: properly handle UVC payloads that occur in the middle of bulk URBs
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• [PATCH] usb: dwc3: make USB_DWC3_EXYNOS independent
  • From: taehyun cho <taehyun.cho@xxxxxxxxxxx>
• [PATCH] usb: hcd: remove unused including <linux/version.h>
  • From: Tian Tao <tiantao6@xxxxxxxxxxxxx>
• Re: [PATCH v3] net: usb: qmi_wwan: support ZTE P685M modem
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 5bb9cdb320a5ca631b584a9aa1ba472eb14705af
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 466b4bed6798e912264325bb4d90dfcd3a8a9128
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: memory leak in edge_startup
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• 回复: 回复: 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: "Zhang, Qiang" <Qiang.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] USB: typec: fusb302: create debugfs subdir for the driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: tcpm: Export partner Source Capabilities
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Honor wakeup enabled/disabled state
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: 回复: 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: kworker takes 100% core after unplugging usb c hub
  • From: Yiyu Zhu <danielzeltar@xxxxxxxxx>
• [PATCH] usb: serial: io_edgeport: fix memory leak in edge_startup
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• AW: [PATCH 0/8] USB Audio Gadget part 2: Feedback endpoint, Volume/Mute support
  • From: "Johannes Freyberger" <Johannes@xxxxxxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 0/8] USB Audio Gadget part 2: Feedback endpoint, Volume/Mute support
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• Re: [PATCH v3] net: usb: qmi_wwan: support ZTE P685M modem
  • From: Lech Perczak <lech.perczak@xxxxxxxxx>
• [PATCH] drivers/media/usb: fix memory leak in zr364xx_probe
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• [PATCH v3] USB: serial: ch341: add new Product ID
  • From: Niv Sardi <xaiki@xxxxxxxxxxxxxx>
• [PATCH v3 0/1] USB: serial: ch341: add new Product ID
  • From: Niv Sardi <xaiki@xxxxxxxxxxxxxx>
• memory leak in edge_startup
  • From: syzbot <syzbot+59f777bdcbdd7eea5305@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [PATCH 0/8] USB Audio Gadget part 2: Feedback endpoint, Volume/Mute support
  • From: "Johannes Freyberger" <Johannes@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb-storage: revert from scsi_add_host_with_dma() to scsi_add_host()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] USB: typec: tcpm: create debugfs subdir for the driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] USB: typec: fusb302: create debugfs subdir for the driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] usb: typec: tps6598x: Add trace event for data status
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] usb: typec: tps6598x: Add trace event for power status register
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] usb: typec: tps6598x: Add trace event for status register
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] usb: typec: tps6598x: Add trace event for IRQ events
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] thunderbolt: debugfs: handle fail reading block
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 8/8] usb: gadget: f_uac1: add volume and mute support
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 7/8] usb: gadget: f_uac2: add volume and mute support
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 4/8] usb: gadget: u_audio: add real feedback implementation
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 6/8] usb: gadget: u_audio: add bi-directional volume and mute support
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 5/8] usb: audio-v2: add ability to define feature unit descriptor
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 2/8] usb: gadget: f_uac2/u_audio: add feedback endpoint support
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 3/8] usb: gadget: f_uac2: add adaptive sync support for capture
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 0/8] USB Audio Gadget part 2: Feedback endpoint, Volume/Mute support
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH 1/8] usb: gadget: u_audio: convert to strscpy
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH v2 4/5] usb: gadget: f_uac1: validate input parameters
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH v2 5/5] usb: gadget: f_uac1: disable IN/OUT ep if unused
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH v2 3/5] usb: gadget: f_uac2: validate input parameters
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH v2 2/5] usb: gadget: f_uac1: stop playback on function disable
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH v2 0/5] USB Audio Gadget part 1: misc fixes and improvements
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• [PATCH v2 1/5] usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
• Re: [PATCH fixed 1/1] USB: serial: ch341: add new Product ID
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: serial: xr: fix NULL-deref on disconnect
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: serial: cp210x: add some more GE USB IDs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] USB: serial: cp210x: add IDs for nLight Air Adapter, Acuity Brands, Inc.
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] USB: serial: cp210x: Make the CP210x driver work with GPIOs of CP2108
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• 回复: 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: "Zhang, Qiang" <Qiang.Zhang@xxxxxxxxxxxxx>
• Re: 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• 回复: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: "Zhang, Qiang" <Qiang.Zhang@xxxxxxxxxxxxx>
• [PATCH] USB: serial: cp210x: Make the CP210x driver work with GPIOs of CP2108
  • From: Pho Tran <Pho.Tran@xxxxxxxxxx>
• Re: [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: add ACPI device id for sc8180x
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH] usb: dwc2: Add STM32 related debugfs entries
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• [PATCH] USB: usblp: Add device status detection in usblp_poll()
  • From: qiang.zhang@xxxxxxxxxxxxx
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: liulongfang <liulongfang@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• RE: [PATCH 2/7] USB: serial: xr: use a table for device-specific settings
  • From: "Chen, Mike Ximing" <mike.ximing.chen@xxxxxxxxx>
• [PATCH 12/11] pragma once: scripted treewide conversion
  • From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
• Re: [PATCH 19/20] usbip: usbip_host: Manual replacement of the deprecated strlcpy() with return values
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH] usb: dwc2: Add STM32 related debugfs entries
  • From: Martin Devera <devik@xxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: liulongfang <liulongfang@xxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: liulongfang <liulongfang@xxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: liulongfang <liulongfang@xxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: liulongfang <liulongfang@xxxxxxxxxx>
• Re: proposal: move Linux userspace USB gadget projects to linux-usb GitHub organisation?
  • From: Michael Sweet <msweet@xxxxxxxxxx>
• Re: proposal: move Linux userspace USB gadget projects to linux-usb GitHub organisation?
  • From: Paul Wise <pabs3@xxxxxxxxxxxxx>
• USB-C bug: port fails to initialize after an unplug/plug
  • From: 420actionunits@xxxxxxxxx
• Re: proposal: move Linux userspace USB gadget projects to linux-usb GitHub organisation?
  • From: Mike Sweet <msweet@xxxxxxxxxx>
• [PATCH fixed 1/1] USB: serial: ch341: add new Product ID
  • From: Niv Sardi <xaiki@xxxxxxxxxxxxxx>
• Re: INFO: task hung in virtio_cleanup
  • From: syzbot <syzbot+1db88381b64aaa929ef6@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers/hid: fix for the big hid report length
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: usbip: serialize attach/detach operations
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: usb: cdc-acm: BUG kmalloc-128 Poison overwritten
  • From: Bruno Thomsen <bruno.thomsen@xxxxxxxxx>
• [PATCH 1/7] USB: serial: xr: simplify its namespace
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 7/7] USB: cdc-acm: add other non-standard xr_serial models to ignore list
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 3/7] USB: serial: xr: add support for multi-port XR21V141X variants
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 6/7] USB: serial: xr: add support for XR2280X devices
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 2/7] USB: serial: xr: use a table for device-specific settings
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 4/7] USB: serial: xr: add support for XR21B142X devices
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 0/7] Add support for the other MaxLinear/Exar UARTs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 5/7] USB: serial: xr: add support for XR21B1411
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: Samsung T5 500 GB USB3.1 SSD fails with ASMedia ASM1142, 250 GB version works
  • From: Jonathan Woithe <jwoithe@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH] USB: serial: xr: fix NULL-deref on disconnect
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH] USB: serial: xr: fix NULL-deref on disconnect
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v5 1/3] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH] USB: remove usb_bus_type from usb.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: xr: fix NULL-deref on disconnect
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: serial: xr: fix NULL-deref on disconnect
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/3] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] ANDROID: usb: core: Send uevent when USB TOPO layer over 6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ANDROID: usb: core: Send uevent when USB TOPO layer over 6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH] ANDROID: usb: core: Send uevent when USB TOPO layer over 6
  • From: Ricky Niu <rickyniu@xxxxxxxxxx>
• Re: [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH] USB:XHCI:Modify XHCI driver for USB2.0 controller
  • From: Longfang Liu <liulongfang@xxxxxxxxxx>
• Re: [PATCH] drivers/hid: fix for the big hid report length
  • From: Sabyrzhan Tasbolatov <snovitoll@xxxxxxxxx>
• Re: [PATCH] USB: serial: ch341: add new Product ID
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb-storage: revert from scsi_add_host_with_dma() to scsi_add_host()
  • From: Christoph Hellwig <hch@xxxxxx>
• [Bug 209555] dwc2 driver stops working after sudden disconnect
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v3] usb: usbip: serialize attach/detach operations
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: usbip: serialize attach/detach operations
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: dwc2 gadget mode different behaviour with different hosts
  • From: Tomasz Grobelny <tomasz.aleksander.grobelny@xxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [PATCH v3] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] USB: serial: ch341: add new Product ID
  • From: x@xxxxxx
• Re: [PATCH v4 4/5] arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v5 1/3] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v5 1/3] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: reference clock configuration
  • From: Kathiravan T <kathirav@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb-storage: revert from scsi_add_host_with_dma() to scsi_add_host()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers/hid: fix for the big hid report length
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] drivers/hid: fix for the big hid report length
  • From: Sabyrzhan Tasbolatov <snovitoll@xxxxxxxxx>
• Re: proposal: move Linux userspace USB gadget projects to linux-usb GitHub organisation?
  • From: Paul Wise <pabs3@xxxxxxxxxxxxx>
• RE: [RESEND PATCH v3 2/2] usb: dwc3: Add driver for Xilinx platforms
  • From: Manish Narani <MNARANI@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v3] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drm: Add GUD USB Display driver
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: usb: cdc-acm: BUG kmalloc-128 Poison overwritten
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH] usb: chipidea: tegra: fix flexible_array.cocci warnings
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: Joe Abbott <jabbott@xxxxxxxxxxxx>
• Re: non-standard baud rates with Prolific 2303 USB-serial
  • From: "Michael G. Katzmann" <michaelk@xxxxxxxx>
• Re: [PATCH v3] net: usb: qmi_wwan: support ZTE P685M modem
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>