Wesley Cheng <wcheng@xxxxxxxxxxxxxx> writes:
> If an error is received when issuing a start or update transfer
> command, the error handler will stop all active requests (including
> the current USB request), and call dwc3_gadget_giveback() to notify
> function drivers of the requests which have been stopped. Avoid
> having to cancel the current request which is trying to be queued, as
> the function driver will handle the EP queue error accordingly.
> Simply unmap the request as it was done before, and allow previously
> started transfers to be cleaned up.
>
> Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - Addressed feedback received by making sure the logic only applies to a req
> which is being queued, decrementing the enqueue pointer, and only clearing
> the HWO bit.
>
> drivers/usb/dwc3/gadget.c | 75 +++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 66 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index dd80e5c..c8ddbe1 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -140,6 +140,29 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
> }
>
> /**
> + * dwc3_ep_dec_trb - decrement a trb index.
> + * @index: Pointer to the TRB index to increment.
> + *
> + * The index should never point to the link TRB. After decrementing,
> + * if index is zero, wrap around to the TRB before the link TRB.
> + */
> +static void dwc3_ep_dec_trb(u8 *index)
> +{
> + (*index)--;
> + if (*index < 0)
> + *index = DWC3_TRB_NUM - 1;
> +}
> +
> +/**
> + * dwc3_ep_dec_enq - decrement endpoint's enqueue pointer
> + * @dep: The endpoint whose enqueue pointer we're decrementing
> + */
> +static void dwc3_ep_dec_enq(struct dwc3_ep *dep)
> +{
> + dwc3_ep_dec_trb(&dep->trb_enqueue);
> +}
> +
> +/**
> * dwc3_ep_inc_trb - increment a trb index.
> * @index: Pointer to the TRB index to increment.
> *
it looks like moving these helpers isn't part of $subject and could be
split to a patch of its own.
> @@ -1352,7 +1375,26 @@ static int dwc3_prepare_trbs(struct dwc3_ep *dep)
>
> static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep);
>
> -static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
> +static void dwc3_gadget_ep_revert_trbs(struct dwc3_ep *dep, struct dwc3_request *req)
> +{
> + int i;
> +
> + if (!req->trb)
> + return;
> +
> + for (i = 0; i < req->num_trbs; i++) {
> + struct dwc3_trb *trb;
> +
> + trb = &dep->trb_pool[dep->trb_enqueue];
wait, enqueue or dequeue?
> @@ -1410,8 +1452,23 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
>
> dwc3_stop_active_transfer(dep, true, true);
>
> - list_for_each_entry_safe(req, tmp, &dep->started_list, list)
> - dwc3_gadget_move_cancelled_request(req, DWC3_REQUEST_STATUS_DEQUEUED);
> + /*
> + * In order to ensure the logic is applied to a request being
> + * queued by dwc3_gadget_ep_queue(), it needs to explicitly
> + * check that req is the same as queued_req (request being
> + * queued). If so, then just unmap and decrement the enqueue
> + * pointer, as the usb_ep_queue() error handler in the function
> + * driver will handle cleaning up the USB request.
> + */
> + list_for_each_entry_safe(req, tmp, &dep->started_list, list) {
> + if (req == queued_req) {
> + dwc3_gadget_ep_revert_trbs(dep, req);
> + dwc3_gadget_del_and_unmap_request(dep, req, ret);
> + } else {
> + dwc3_gadget_move_cancelled_request(req,
> + DWC3_REQUEST_STATUS_DEQUEUED);
we don't line up the arguments like that in dwc3.
> @@ -1546,7 +1603,7 @@ static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep)
> dep->start_cmd_status = 0;
> dep->combo_num = 0;
>
> - return __dwc3_gadget_kick_transfer(dep);
> + return __dwc3_gadget_kick_transfer(dep, NULL);
I would rather not have this extra special case for kick transfer,
instead you can treat the special case in the only location where it can
happen, i.e. ep_queue(). So, instead of patching kick_transfer itself,
you can make sure that kick transfer does *NOT* touch the current
request and only cancel all the previous, then ep_queue is responsible
for treating failed kick transfer for the current request. Either that,
or make sure dwc3_prepare_trbs() knows how to handle this special case internally.
The current method seems wrong, IMO. It really seems like the problem is
elsewhere. Perhaps there's some other part of the driver that's not
cleaning up after itself.
--
balbi
Attachment:
signature.asc
Description: PGP signature
