On Thu, 29 Apr 2021 22:19:11 -0500, Samuel Holland wrote: > The RST_BUS_XHCI reset line in the H6 affects both the DWC3 core and the > USB3 PHY. This suggests the reset line controls the USB3 IP as a whole. > Represent this by attaching the reset line to a glue layer device. > > Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> > --- > .../usb/allwinner,sun50i-h6-dwc3.yaml | 75 +++++++++++++++++++ > 1 file changed, 75 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.example.dts:23.27-50.11: Warning (unit_address_vs_reg): /example-0/usb@5200000: node has a unit name, but no reg or ranges property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.example.dt.yaml: usb@5200000: usb@5200000:phy-names:0: 'usb2-phy' was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.example.dt.yaml: usb@5200000: phy-names:0: 'usb2-phy' was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.yaml See https://patchwork.ozlabs.org/patch/1471948 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
