Thanks for your super-fast reply! > From: Felipe Balbi [mailto:balbi@xxxxxxxxxx] > Sent: Monday, May 3, 2021 3:52 PM > It's like the host is trying to go down to lower LPM states every 100ms: > > irq/13-dwc3-236 [000] d..1 71.363262: dwc3_event: event (00000401): WakeUp [U0] > irq/13-dwc3-236 [000] d..1 71.363315: dwc3_event: event (00000401): WakeUp [U0] > irq/13-dwc3-236 [000] d..1 71.363423: dwc3_event: event (00006084): ep1out: Transfer In Progress [0] (SIm) How do you arrive at 100ms? These wakeups are around 50 microseconds apart. > > Is the USB 2.0 LPM extension even supposed to work with the dwc3 controller? I > > yes, it should be supported :-) I've spent some time looking at the code and I don't understand how the device is supposed to wake up the host once it's able to receive new data again. The closest thing I could find is the __dwc3_gadget_wakeup function which is called by dwc3_send_gadget_ep_cmd. But I don't understand the condition there. The wakeup is only executed for DWC3_DEPCMD_STARTTRANSFER, but I understand bulk transfers are only started once the endpoint is configured and then only DWC3_DEPCMD_UPDATETRANSFER is used. > could you share a dump of your descriptors? It could be that the wake-up > latencies are incorrect which tricks the host into trying to go down to > lower LPM states too frequently. Bus 001 Device 003: ID 3386:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x3386 idProduct 0x0001 bcdDevice 5.12 iManufacturer 1 SmarAct iProduct 2 SmarAct Sensor iSerial 3 PSC-00000038 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 SmarAct Config 1 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 5 SmarAct Sensor Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 22 bNumDeviceCaps 2 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000010e Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000f Device can operate at Low Speed (1Mbps) Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 511 micro seconds Device Status: 0x0001 Self Powered
