Linux USB Users
[Prev Page][Next Page]
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- [PATCH] usb: usb251xb: Add an empty hub' i2c-bus segment checker
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH] USB: serial: drop unused iflag macro
- From: Greg KH <greg@xxxxxxxxx>
- Re: Line6 podstudio UX1 - driver crash on usb_hcd_map_urb_for_dma
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] usb: hub:Extend usb_hub_clear_tt_buffer parameter
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: gadget: atmel: support USB suspend
- From: Jonas Bonn <jonas@xxxxxxxxxxx>
- Re: [PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 14/14] usb: dwc2: Add enter/exit hibernation from system issued suspend/resume
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 12/14] usb: dwc2: Clear fifo_map when resetting core.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 09/14] usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 3/6] dt-bindings: usb: mtu3: add properties about USB Role Switch
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 08/14] usb: dwc2: Add default param to control power optimization.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 2/6] dt-bindings: usb: add binding for Type-B GPIO connector driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 06/14] usb: dwc2: Add part. power down exit from dwc2_conn_id_status_change().
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 05/14] usb: dwc2: Add port conn. sts. checking in _dwc2_hcd_resume() function.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 04/14] usb: dwc2: Fix suspend state in host mode for partial power down.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 03/14] usb: dwc2: Fix wakeup detected and session request interrupt handlers.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 01/14] usb: dwc2: Fix dwc2_restore_device_registers() function.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH net] qmi_wwan: new Wistron, ZTE and D-Link devices
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH net] qmi_wwan: new Wistron, ZTE and D-Link devices
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH] usbnet: ipheth: Simplify device detection
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 0/6] usb: Add Clear_TT_Buffer support for XHCI
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH net] qmi_wwan: new Wistron, ZTE and D-Link devices
- From: David Miller <davem@xxxxxxxxxxxxx>
- [PATCH 6/6] usb: xhci: Add Clear_TT_Buffer
- From: Jim Lin <jilin@xxxxxxxxxx>
- [PATCH 5/6] usb: dwc2: Adjusted for usb_hub_clear_tt_buffer
- From: Jim Lin <jilin@xxxxxxxxxx>
- [PATCH 4/6] usb: ehci: Adjusted for usb_hub_clear_tt_buffer
- From: Jim Lin <jilin@xxxxxxxxxx>
- [PATCH 3/6] usb: fotg210:Adjusted for usb_hub_clear_tt_buffer
- From: Jim Lin <jilin@xxxxxxxxxx>
- [PATCH 2/6] usb: isp1760:Adjusted for usb_hub_clear_tt_buffer
- From: Jim Lin <jilin@xxxxxxxxxx>
- [PATCH 1/6] usb: hub:Extend usb_hub_clear_tt_buffer parameter
- From: Jim Lin <jilin@xxxxxxxxxx>
- [PATCH 0/6] usb: Add Clear_TT_Buffer support for XHCI
- From: Jim Lin <jilin@xxxxxxxxxx>
- Re: [PATCH] usb: xhci: inherit dma_mask from bus if set correctly
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Linux crash when using FTDI FT232R USB to serial converter on AMD boards.
- From: "StarostaCZ@xxxxxxxxx" <starostacz@xxxxxxxxx>
- [PATCH 4/4] usb: xhci: add endpoint context tracing when an endpoint is added
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 3/4] xhci: Add tracing for input control context
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 1/4] usb: xhci: add Immediate Data Transfer support
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 0/4] xhci features for usb-next
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: connector: add optional properties for Type-B
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: Use device tree to disable U1/U2 in gadget devices based on DWC3
- From: "Claus H. Stovgaard" <cst@xxxxxxxxxxxx>
- Re: [PATCH] usbnet: ipheth: Simplify device detection
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: Use device tree to disable U1/U2 in gadget devices based on DWC3
- From: "Claus H. Stovgaard" <cst@xxxxxxxxxxxx>
- Re: [PATCH] usbnet: ipheth: Simplify device detection
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] usbnet: ipheth: Simplify device detection
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- RE: [PATCH v6 1/6] dt-bindings: add binding for USBSS-DRD controller.
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- Line6 podstudio UX1 - driver crash on usb_hcd_map_urb_for_dma
- From: Christo Gouws <gouws.christo@xxxxxxxxx>
- RE: [PATCH v4 5/6] usb: roles: add USB Type-B GPIO connector driver
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- Re: [PATCH v6 1/6] dt-bindings: add binding for USBSS-DRD controller.
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Arnd Bergmann <arnd@xxxxxxxx>
- RE: [PATCH v4 4/6] usb: roles: add API to get usb_role_switch by node
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- RE: [PATCH v4 4/6] usb: roles: add API to get usb_role_switch by node
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [v4 PATCH 0/6] add USB Type-B GPIO connector driver
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v4 5/6] usb: roles: add USB Type-B GPIO connector driver
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v4 2/6] dt-bindings: usb: add binding for Type-B GPIO connector driver
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v4 3/6] dt-bindings: usb: mtu3: add properties about USB Role Switch
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v4 1/6] dt-bindings: connector: add optional properties for Type-B
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v4 6/6] usb: mtu3: register a USB Role Switch for dual role mode
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v4 4/6] usb: roles: add API to get usb_role_switch by node
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 0/9] USB: serial: fix initial-termios handling
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH V8 2/4] USB: serial: f81232: fix interrupt worker not stop
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH V8 1/4] USB: serial: f81232: clear overrun flag
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH] USB: serial: drop unused iflag macro
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 0/5] USB: fix tty unthrottle races
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] usb: xhci: inherit dma_mask from bus if set correctly
- From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
- [RFC] Question about reset order for xhci controller and pci
- From: "Tangnianyao (ICT)" <tangnianyao@xxxxxxxxxx>
- Re: [PATCH] usbip: stub_rx: tidy the indenting in is_clear_halt_cmd()
- From: shuah <shuah@xxxxxxxxxx>
- Re: configfs on dwc3: msc enum failed if three functions defined
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- [PATCH v2] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH v6 13/13] dts: hi3660: Add support for usb on Hikey960
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] usb: dwc3: gadget: Set lpm_capable
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] usb: dwc3: Do core validation early on probe
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [PATCH] usb: dwc3: debug: Print GET_STATUS(device) tracepoint
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [PATCH 2/2] usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH 0/5] USB: fix tty unthrottle races
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] usb: dwc3: Fix default lpm_nyet_threshold value
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [usb:usb-next 54/62] drivers/usb/misc/usb251xb.c:248:50: error: dereferencing pointer to incomplete type 'struct gpio_chip'
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: Use device tree to disable U1/U2 in gadget devices based on DWC3
- From: Rob Weber <rob@xxxxxxxxxxx>
- Re: [PATCH v2 3/5] Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2 3/5] Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V2] usb: gadget: f_fs: don't free buffer prematurely
- From: John Stultz <john.stultz@xxxxxxxxxx>
- [PATCH 5/5] USB: cdc-acm: clean up throttle handling
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 4/5] USB: cdc-acm: fix unthrottle races
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 3/5] USB: serial: generic: drop unnecessary goto
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 2/5] USB: serial: clean up throttle handling
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 1/5] USB: serial: fix unthrottle races
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 0/5] USB: fix tty unthrottle races
- From: Johan Hovold <johan@xxxxxxxxxx>
- RE: [PATCH V2] usb: gadget: f_fs: don't free buffer prematurely
- From: "Yang, Fei" <fei.yang@xxxxxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- Re: [balbi-usb:testing/next 19/42] drivers/usb/dwc2/core_intr.c:448:25: error: 'struct dwc2_hsotg' has no member named 'phy_reset_work'
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] usb: dwc2: Fix phy_reset_work compile error for peripheral-only config
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/5] usb: dwc2: Move UTMI_PHY_DATA defines closer
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- Re: [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- [PATCH] usb: xhci: avoid null pointer deref when bos field is NULL
- From: "Schmid, Carsten" <Carsten_Schmid@xxxxxxxxxx>
- Re: [PATCH V2 4/8] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH V2 3/8] phy: tegra: xusb: t210: add vbus override support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [balbi-usb:testing/next 19/42] drivers/usb/dwc2/core_intr.c:448:25: error: 'struct dwc2_hsotg' has no member named 'phy_reset_work'
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] xhci: update bounce buffer with correct sg num
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH V2 2/8] phy: tegra: xusb: t210: add usb3 port fake support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: Command ring abort xhci_handshake question
- From: "Bollinger, Seth" <Seth.Bollinger@xxxxxxxx>
- Re: USB fuzzing with syzbot
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Command ring abort xhci_handshake question
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V2 1/8] phy: tegra: xusb: t210: add XUSB dual mode support
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: KASAN: use-after-free Read in dvb_usb_device_exit
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- Re: [PATCH V2 4/8] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH V2 7/8] usb: gadget: Add UDC driver for tegra XUSB device mode controller
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Command ring abort xhci_handshake question
- From: "Bollinger, Seth" <Seth.Bollinger@xxxxxxxx>
- [balbi-usb:testing/next 19/42] drivers/usb/dwc2/core_intr.c:448:25: error: 'struct dwc2_hsotg' has no member named 'phy_reset_work'
- From: kbuild test robot <lkp@xxxxxxxxx>
- RE: [PATCH] usb: dwc3: gadget: issue a stop command for ISOC endpoint
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH V2 7/8] usb: gadget: Add UDC driver for tegra XUSB device mode controller
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 1/5] usb: dwc2: Move UTMI_PHY_DATA defines closer
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH 01/14] usb: dwc2: Fix dwc2_restore_device_registers() function.
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: USB fuzzing with syzbot
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- Re: [PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH v2 4/5] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- WARNING: suspicious RCU usage in line6_pcm_acquire
- From: syzbot <syzbot+06b7a5a8c4acc0445995@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] xhci: update bounce buffer with correct sg num
- From: Henry Lin <henryl@xxxxxxxxxx>
- Re: [PATCH v4] usb/hcd: Send a uevent signaling that the host controller had died
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/7] usb: typec: ucsi: Remaining changes for v5.2
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V2] usb: gadget: f_fs: don't free buffer prematurely
- From: John Stultz <john.stultz@xxxxxxxxxx>
- [PATCH 2/3] usb: usb251xb: Create a ports field collector method
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- [PATCH 3/3] usb: usb251xb: Add US port lanes inversion property
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- [PATCH 1/3] usb: usb251xb: Add US lanes inversion dts-bindings
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- [PATCH 0/3] usb: usb251xb: Add upstream port lanes polarity inversion
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: Use device tree to disable U1/U2 in gadget devices based on DWC3
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH net] qmi_wwan: new Wistron, ZTE and D-Link devices
- From: Bjørn Mork <bjorn@xxxxxxx>
- [PATCH] usbnet: ipheth: Simplify device detection
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH V2] usb: gadget: f_fs: don't free buffer prematurely
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Use device tree to disable U1/U2 in gadget devices based on DWC3
- From: "Claus H. Stovgaard" <cst@xxxxxxxxxxxx>
- Re: USB fuzzing with syzbot
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- Re: USB fuzzing with syzbot
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- Re: [PATCH 0/6] musb: Improve performance for hub-attached webcams
- From: "Matwey V. Kornilov" <matwey.kornilov@xxxxxxxxx>
- [PATCH v2] usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
- From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
- [PATCH] usb: usb251xb: Lock i2c-bus segment the hub resides
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: Regression causes a hang on boot with a Comtrol PCI card
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: KASAN: use-after-free Read in dvb_usb_device_exit
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: Bug#918800: PROBLEM: USB 3.0 NIC operates only at USB 2.0 speed on Odroid HC1
- From: "Steinar H. Gunderson" <sesse@xxxxxxxxxx>
- Re: [PATCH] usb: xhci: inherit dma_mask from bus if set correctly
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH] usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
- From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
- [PATCH] usbip: stub_rx: tidy the indenting in is_clear_halt_cmd()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH V5 6/9] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V5 5/9] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V5 4/9] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V5 3/9] dt-bindings: usb: hd3ss3220 device tree binding document
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V5 2/9] usb: roles: add API to get usb_role_switch by node
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V5 1/9] usb: roles: Introduce stubs for the exiting functions in role.h.
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V5 0/9] Add USB3.0 and TI HD3SS3220 driver support
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci: inherit dma_mask from bus if set correctly
- From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
- Re: [PATCH] usb: usbip: fix isoc packet num validation in get_pipe
- From: shuah <shuah@xxxxxxxxxx>
- Re: Regression causes a hang on boot with a Comtrol PCI card
- From: Jesse Hathaway <jesse@xxxxxxxxxxxxxxx>
- [PATCH] USB: yurex: Fix protection fault after device removal
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: syzbot <syzbot+2eb9121678bdb36e6d57@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Query on usb/core/devio.c
- From: Mayuresh Kulkarni <mkulkarni@xxxxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: syzbot <syzbot+2eb9121678bdb36e6d57@xxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] dt-bindings: usb-xhci: Add r8a774c0 support
- From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH V4 4/7] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- [PATCH v4 5/7] usb: typec: ucsi: Support for DisplayPort alt mode
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 7/7] usb: typec: Add driver for NVIDIA Alt Modes
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 6/7] usb: typec: displayport: Export probe and remove functions
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 4/7] usb: typec: ucsi: Preliminary support for alternate modes
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 3/7] usb: typec: ucsi: ccg: add firmware flashing support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 2/7] i2c: nvidia-gpu: Supply CCGx driver the fw build info
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 1/7] usb: typec: ucsi: ccg: add get_fw_info function
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v4 0/7] usb: typec: ucsi: Remaining changes for v5.2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: UDC hardware for fuzzing [was: Re: INFO: task hung in usb_kill_urb]
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- KASAN: invalid-free in rsi_91x_deinit
- From: syzbot <syzbot+7c72edfb407b2bd866ce@xxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH V4 4/7] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- RE: [PATCH V4 4/7] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH v6 1/4] dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 Compatible
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- [PATCH v6 3/4] usb: dwc2: Add Amlogic G12A DWC2 Params
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- [PATCH v6 4/4] usb: dwc3: Add Amlogic G12A DWC3 glue
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- [PATCH v6 2/4] dt-bindings: usb: dwc3: Add Amlogic G12A DWC3 Glue Bindings
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- [PATCH v6 0/4] arm64: meson: Add support for USB on Amlogic G12A
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: usb: dwc2: Usb wifi dongle fails to initialize with Frame Overrun errors
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- [PATCH next 24/25] usb: musb: dsps: Use dev_get_drvdata()
- From: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
- Re: [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- From: Crag Wang <crag0715@xxxxxxxxx>
- RE: [PATCH V4 4/7] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- RE: [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- From: <Mario.Limonciello@xxxxxxxx>
- Re: [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- From: Jakub Kicinski <jakub.kicinski@xxxxxxxxxxxxx>
- [PATCH AUTOSEL 5.0 32/98] usb: gadget: net2280: Fix net2280_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.0 31/98] usb: gadget: net2280: Fix overrun of OUT messages
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.0 30/98] usb: dwc3: pci: add support for Comet Lake PCH ID
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.0 69/98] usb: u132-hcd: fix resource leak
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.0 65/98] usb: usb251xb: fix to avoid potential NULL pointer dereference
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 22/68] usb: gadget: net2280: Fix overrun of OUT messages
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 21/68] usb: dwc3: pci: add support for Comet Lake PCH ID
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 24/68] usb: gadget: net2272: Fix net2272_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 23/68] usb: gadget: net2280: Fix net2280_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 52/68] usb: usb251xb: fix to avoid potential NULL pointer dereference
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 55/68] usb: u132-hcd: fix resource leak
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 10/43] usb: gadget: net2280: Fix overrun of OUT messages
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 12/43] usb: gadget: net2272: Fix net2272_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 34/43] usb: u132-hcd: fix resource leak
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 33/43] usb: usb251xb: fix to avoid potential NULL pointer dereference
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.9 08/29] usb: gadget: net2280: Fix overrun of OUT messages
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.9 10/29] usb: gadget: net2272: Fix net2272_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.9 09/29] usb: gadget: net2280: Fix net2280_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.9 22/29] usb: u132-hcd: fix resource leak
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.4 04/21] usb: gadget: net2280: Fix overrun of OUT messages
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.4 06/21] usb: gadget: net2272: Fix net2272_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.4 16/21] usb: u132-hcd: fix resource leak
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 3.18 03/15] usb: gadget: net2272: Fix net2272_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 3.18 02/15] usb: gadget: net2280: Fix overrun of OUT messages
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 3.18 10/15] usb: u132-hcd: fix resource leak
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.4 05/21] usb: gadget: net2280: Fix net2280_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 11/43] usb: gadget: net2280: Fix net2280_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.0 33/98] usb: gadget: net2272: Fix net2272_dequeue()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: syzbot <syzbot+2eb9121678bdb36e6d57@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: syzbot <syzbot+2eb9121678bdb36e6d57@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: w1 ds2490: Fix bug caused by improper use of altsetting array
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- configfs on dwc3: msc enum failed if three functions defined
- From: Bin Liu <b-liu@xxxxxx>
- [PATCH v2 59/79] docs: hid: convert to ReST
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- RE: [PATCH] net: lan78xx: fix "enabled interrupts" warninig
- From: <RaghuramChary.Jallipalli@xxxxxxxxxxxxx>
- [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- Re: [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- From: Crag Wang <crag0715@xxxxxxxxx>
- Re: [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- From: David Miller <davem@xxxxxxxxxxxxx>
- [PATCH v2 1/1] r8152: sync sa_family with the media type of network device
- Re: [PATCH 1/1] r8152: sync sa_family with the media type of network device
- From: Crag Wang <crag0715@xxxxxxxxx>
- Re: [PATCH 2/2] USB: serial: digi_acceleport: clean up set_termios
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 9/9] USB: serial: spcp8x5: simplify init_termios
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 8/9] USB: serial: oti6858: simplify init_termios
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 7/9] USB: serial: iuu_phoenix: simplify init_termios
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 2/9] USB: serial: ark3116: drop redundant init_termios
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 0/9] USB: serial: fix initial-termios handling
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 5/9] USB: serial: cypress_m8: clean up initial-termios handling
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 3/9] USB: serial: cypress_m8: drop unused driver data flag
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 6/9] USB: serial: iuu_phoenix: drop bogus initial cflag
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 4/9] USB: serial: cypress_m8: drop unused termios
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 1/9] USB: serial: fix initial-termios handling
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v6 10/13] usb: dwc3: Registering a role switch in the DRD code.
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 12/13] usb: gadget: Add configfs attribuite for controling match_existing_only
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 09/13] usb: roles: Add usb role switch notifier.
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 05/13] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 01/13] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 08/13] usb: roles: Introduce stubs for the exiting functions in role.h.
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 13/13] dts: hi3660: Add support for usb on Hikey960
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 11/13] hikey960: Support usb functionality of Hikey960
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- [PATCH v6 00/13] Add support for usb on Hikey960
- From: Yu Chen <chenyu56@xxxxxxxxxx>
- Re: WARNING: ODEBUG bug in rsi_probe
- From: syzbot <syzbot+1d1597a5aa3679c65b9f@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 09/26] compat_ioctl: move drivers to compat_ptr_ioctl
- From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
- Re: Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files to ReST
- From: Jonathan Corbet <corbet@xxxxxxx>
- Re: general protection fault in __dev_printk
- From: syzbot <syzbot+2eb9121678bdb36e6d57@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in smsusb_init_device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: KASAN: slab-out-of-bounds Read in ds_probe
- From: syzbot <syzbot+d65f673b847a1a96cdba@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usbnet: fix kernel crash after disconnect
- From: Jan Klötzke <jan@xxxxxxxxxxxx>
- [PATCH v1 12/14] usb: dwc2: Clear fifo_map when resetting core.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- Re: [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 01/14] usb: dwc2: Fix dwc2_restore_device_registers() function.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 07/14] usb: dwc2: Reset DEVADDR after exiting gadget hibernation.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 14/14] usb: dwc2: Add enter/exit hibernation from system issued suspend/resume
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 10/14] usb: dwc2: Fix hibernation between host and device modes.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 03/14] usb: dwc2: Fix wakeup detected and session request interrupt handlers.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 04/14] usb: dwc2: Fix suspend state in host mode for partial power down.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 02/14] usb: dwc2: Add descriptive debug messages for Partial Power Down mode.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- KASAN: use-after-free Read in v4l2_fh_init
- From: syzbot <syzbot+c025d34b8eaa54c571b8@xxxxxxxxxxxxxxxxxxxxxxxxx>
- usb: dwc2: Usb wifi dongle fails to initialize with Frame Overrun errors
- From: Hal Emmerich <hal@xxxxxxxxxxxxxxx>
- Re: KASAN: slab-out-of-bounds Read in ds_probe
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] r8152: sync sa_family with the media type of network device
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] r8152: sync sa_family with the media type of network device
- Re: Microphone volume low on linux driver
- From: Eric Curtin <ericcurtin17@xxxxxxxxx>
- [PATCH v4] usb/hcd: Send a uevent signaling that the host controller had died
- From: Raul E Rangel <rrangel@xxxxxxxxxxxx>
- [PATCH] usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
- From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
- Re: [PATCH] usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
- From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
- Re: [PATCH] USB: core: Fix bug caused by duplicate interface PM usage counter
- From: Greg KH <greg@xxxxxxxxx>
- Microphone volume low on linux driver
- From: Eric Curtin <ericcurtin17@xxxxxxxxx>
- Re: [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 05/14] usb: dwc2: Add port conn. sts. checking in _dwc2_hcd_resume() function.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 06/14] usb: dwc2: Add part. power down exit from dwc2_conn_id_status_change().
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 13/14] usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 08/14] usb: dwc2: Add default param to control power optimization.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 11/14] usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 09/14] usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- [PATCH v1 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- Re: USB fuzzing with syzbot
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- UDC hardware for fuzzing [was: Re: INFO: task hung in usb_kill_urb]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] USB: serial: digi_acceleport: clean up modem-control handling
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: USB fuzzing with syzbot
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: Allow building USB_DWC3_QCOM without EXTCON
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: serial: pl2303: fix xon/xoff flow control
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: serial: digi_acceleport: clean up set_termios
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: core: Fix bug caused by duplicate interface PM usage counter
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH V8 4/4] USB: serial: f81232: implement break control
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- [PATCH V8 3/4] USB: serial: f81232: add high baud rate support
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- [PATCH V8 2/4] USB: serial: f81232: fix interrupt worker not stop
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- [PATCH V8 1/4] USB: serial: f81232: clear overrun flag
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- Re: [PATCH] usbnet: fix kernel crash after disconnect
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: syzbot <syzbot+7634edaea4d0b341c625@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 4.19 069/110] usbip: fix vhci_hcd controller counting
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: syzbot <syzbot+7634edaea4d0b341c625@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 4.14 49/92] usbip: fix vhci_hcd controller counting
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: syzbot <syzbot+7634edaea4d0b341c625@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: dummy-hcd: Fix failure to give back unlinked URBs
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: general protection fault in __dev_printk
- From: syzbot <syzbot+2eb9121678bdb36e6d57@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] USB: serial: digi_acceleport: clean up modem-control handling
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 2/2] USB: serial: digi_acceleport: clean up set_termios
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH] USB: serial: pl2303: fix xon/xoff flow control
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Raul Rangel <rrangel@xxxxxxxxxxxx>
- [PATCH v3] usb: host: use usb_endpoint_maxp instead of usb_maxpacket
- From: zhuyan <zhuyan34@xxxxxxxxxx>
- Re: [PATCH v2] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Avoiding merge conflicts while adding new docs - Was: Re: [PATCH 00/57] Convert files to ReST
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- Re: [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- BUG: unable to handle kernel paging request in osq_lock
- From: syzbot <syzbot+e5c9afc3e1eed1dfc2b0@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- general protection fault in smsusb_init_device
- From: syzbot <syzbot+53f029db71c19a47325a@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: dwc2: gadget: Reject LPM token during Control transfers
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH v3 09/26] compat_ioctl: move drivers to compat_ptr_ioctl
- From: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
- Re: [PATCH v2] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: "zhuyan (M)" <zhuyan34@xxxxxxxxxx>
- Re: [PATCH v2] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: "zhuyan (M)" <zhuyan34@xxxxxxxxxx>
- Re: [PATCH] usbnet: fix kernel crash after disconnect
- From: Kloetzke Jan <Jan.Kloetzke@xxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usbnet: fix kernel crash after disconnect
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH v2 2/5] USB: Export usb_wakeup_enabled_descendants()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 5/5] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 4/5] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 3/5] Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 1/5] usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Guenter Roeck <groeck@xxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Raul Rangel <rrangel@xxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Guenter Roeck <groeck@xxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Raul Rangel <rrangel@xxxxxxxxxxxx>
- Re: [PATCH v3 10/26] compat_ioctl: use correct compat_ptr() translation in drivers
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: syzbot <syzbot+7634edaea4d0b341c625@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Raul Rangel <rrangel@xxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: syzbot <syzbot+d919b0f29d7b5a4994b9@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v3] usb/hcd: Send a uevent signaling that the host controller had died
- From: Raul E Rangel <rrangel@xxxxxxxxxxxx>
- Re: [PATCH v2] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb/hcd: Send a uevent signaling that the host controller has died
- From: Raul Rangel <rrangel@xxxxxxxxxxxx>
- Re: [PATCH v2] usb/hcd: Send a uevent signaling that the host controller has died
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb/hcd: Send a uevent signaling that the host controller has died
- From: Raul Rangel <rrangel@xxxxxxxxxxxx>
- [PATCH v2] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: "zhuyan (M)" <zhuyan34@xxxxxxxxxx>
- USB fuzzing with syzbot
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- Re: [PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: "zhuyan (M)" <zhuyan34@xxxxxxxxxx>
- Re: [PATCH v3] HID: add driver for U2F Zero built-in LED and RNG
- From: Andrej Shadura <andrew.shadura@xxxxxxxxxxxxxxx>
- Re: [PATCH v3] HID: add driver for U2F Zero built-in LED and RNG
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- Re: [PATCH v3 0/7] usb: typec: ucsi: Remaining changes for v5.2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
- From: Charles Yeh <charlesyeh522@xxxxxxxxx>
- Re: [PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v3 7/7] usb: typec: Add driver for NVIDIA Alt Modes
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 6/7] usb: typec: displayport: Export probe and remove functions
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 5/7] usb: typec: ucsi: Support for DisplayPort alt mode
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 4/7] usb: typec: ucsi: Preliminary support for alternate modes
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 3/7] usb: typec: ucsi: ccg: add firmware flashing support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 2/7] i2c: nvidia-gpu: Supply CCGx driver the fw build info
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 1/7] usb: typec: ucsi: ccg: add get_fw_info function
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 0/7] usb: typec: ucsi: Remaining changes for v5.2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- general protection fault in __dev_printk
- From: syzbot <syzbot+2eb9121678bdb36e6d57@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: slab-out-of-bounds Read in ds_probe
- From: syzbot <syzbot+d65f673b847a1a96cdba@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- Re: [PATCH] USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
- From: Johan Hovold <johan@xxxxxxxxxx>
- RE: [PATCH V4 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- RE: [PATCH v2 3/3] usb: typec: fusb302: Revert "Resolve fixed power role contract setup"
- From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
- Re: [PATCH] USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
- From: Charles Yeh <charlesyeh522@xxxxxxxxx>
- RE: [PATCH v2 2/3] usb: typec: fusb302: Implement start_toggling for all port-types
- From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
- RE: [PATCH v2 1/3] usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPs
- From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
- Re: [PATCH V4 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH] usbnet: fix kernel crash after disconnect
- From: Kloetzke Jan <Jan.Kloetzke@xxxxxxx>
- [PATCH v3 2/6] usb: host: xhci-plat: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 3/6] usb: misc: usb3503: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 4/6] usb: dwc2: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 6/6] usb: mtu3: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 5/6] usb: chipidea: msm: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 1/6] usb: xhci-mtk: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH] net: lan78xx: fix "enabled interrupts" warninig
- From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
- Re: [PATCH v5 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon
- From: Chen Yu <chenyu56@xxxxxxxxxx>
- Re: [PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: "zhuyan (M)" <zhuyan34@xxxxxxxxxx>
- Re: [PATCH v5 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v8 3/3] usb: typec: ucsi: ccg: add firmware flashing support
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] usb: typec: fusb302: Revert "Resolve fixed power role contract setup"
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/3] usb: typec: fusb302: Implement start_toggling for all port-types
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPs
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [v2 PATCH 1/6] usb: xhci-mtk: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [v2 PATCH 1/6] usb: xhci-mtk: get optional clock by devm_clk_get_optional()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- RE: [PATCH] net: lan78xx: fix "enabled interrupts" warninig
- From: <RaghuramChary.Jallipalli@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] usb: typec: fusb302: Revert "Resolve fixed power role contract setup"
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 2/3] usb: typec: fusb302: Implement start_toggling for all port-types
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 00/26] compat_ioctl: cleanups
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: dwc2: optionally assert phy reset when waking up
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 0/4] usb: dwc2: Another attempt handling rk3288's remote wake quirk
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 4/4] ARM: dts: rockchip: Add quirk for resetting rk3288's dwc2 host on wakeup
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 3/4] ARM: dts: rockchip: Hook resets up to USB PHYs on rk3288.
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 2/4] usb: dwc2: optionally assert phy reset when waking up
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: usb: dwc2: Document quirk to reset PHY upon wakeup
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: syzbot <syzbot+d919b0f29d7b5a4994b9@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: syzbot <syzbot+7634edaea4d0b341c625@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 09/26] compat_ioctl: move drivers to compat_ptr_ioctl
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v3 09/26] compat_ioctl: move drivers to compat_ptr_ioctl
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v3 10/26] compat_ioctl: use correct compat_ptr() translation in drivers
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v3 00/26] compat_ioctl: cleanups
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v2 3/3] usb: typec: fusb302: Revert "Resolve fixed power role contract setup"
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 2/3] usb: typec: fusb302: Implement start_toggling for all port-types
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 1/3] usb: typec: tcpm: Notify the tcpc to start connection-detection for SRPs
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 2/3] usb: typec: fusb302: Implement start_srp_connection_detect
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: syzbot <syzbot+7634edaea4d0b341c625@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: syzbot <syzbot+d919b0f29d7b5a4994b9@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: syzbot <syzbot+7634edaea4d0b341c625@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: WARNING in usb_submit_urb (4)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v8 3/3] usb: typec: ucsi: ccg: add firmware flashing support
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v8 2/3] i2c: nvidia-gpu: Supply CCGx driver the fw build info
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v8 1/3] usb: typec: ucsi: ccg: add get_fw_info function
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v8 0/3] Add support for firmware update on Cypres CCGx
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: syzbot <syzbot+d919b0f29d7b5a4994b9@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Regression causes a hang on boot with a Comtrol PCI card
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: core: Don't unbind interfaces following device reset failure
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: "zhuyan (M)" <zhuyan34@xxxxxxxxxx>
- Re: [PATCH 1/8] usb: typec: fusb302: Make fusb302_set_cc_polarity also set pull ups / downs
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] usb: gadget: f_ncm: Add OS descriptor support
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH 1/2] usb: gadget: f_ncm: Fix NTP-32 support
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- Re: [PATCH 1/8] usb: typec: fusb302: Make fusb302_set_cc_polarity also set pull ups / downs
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH] usb: gadget: fsl: fix link error against usb-gadget module
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 36/57] docs: usb: convert documents to ReST
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- Re: [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Johan Hovold <johan@xxxxxxxxxx>
- BUG: corrupted list in snd_info_create_entry
- From: syzbot <syzbot+8016c844427ade041774@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: use-after-free Read in cpia2_usb_disconnect
- From: syzbot <syzbot+0c90fc937c84f97d0aa6@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/8] usb: typec: fusb302: Make fusb302_set_cc_polarity also set pull ups / downs
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [v2 PATCH 1/6] usb: xhci-mtk: get optional clock by devm_clk_get_optional()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [v2 PATCH 1/6] usb: xhci-mtk: get optional clock by devm_clk_get_optional()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 7/7] usb: typec: Add driver for NVIDIA Alt Modes
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb/hcd: Send a uevent signaling that the host controller has died
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/7] usb: typec: ucsi: ccg: add firmware flashing support
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Null pointer deference in function stk_camera_probe and s2255_probe
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb:host: fix divide-by-zero in function fhci_queue_urb
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH V4 5/7] arm64: defconfig: enable TYPEC_HD3SS3220 config option
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V4 4/7] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V4 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V4 2/7] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V4 1/7] dt-bindings: usb: hd3ss3220 device tree binding document
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V4 0/7] Add USB3.0 and TI HD3SS3220 driver support
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 5/6] ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
- [PATCH 6/6] arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
- [PATCH 4/6] ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
- [PATCH 3/6] dt-bindings: usb: Convert the generic EHCI binding to YAML
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
- [PATCH 2/6] dt-bindings: usb: Convert the generic OHCI binding to YAML
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
- [PATCH 1/6] dt-bindings: usb: Convert USB HCD generic binding to YAML
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
- [PATCH V7 1/4] USB: serial: f81232: clear overrun flag
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- [PATCH V7 2/4] USB: serial: f81232: fix interrupt worker not stop
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- [PATCH V7 4/4] USB: serial: f81232: implement break control
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- [PATCH V7 3/4] USB: serial: f81232: add high baud rate support
- From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
- Re: Explicit status-stage requests for USB gadgets
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 36/57] docs: usb: convert documents to ReST
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: KASAN: use-after-free Read in v4l2_release
- From: syzbot <syzbot+a4387f5b6b799f6becbf@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 00/57] Convert files to ReST
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- [PATCH 36/57] docs: usb: convert documents to ReST
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- Re: [EXT] Re: Why there is a refcnt check when we change configfs property
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- RE: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
- From: <Kento.A.Kobayashi@xxxxxxxx>
- RE: [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
- From: Ajay Gupta <ajayg@xxxxxxxxxx>
- Re: BUG: corrupted list in snd_info_free_entry
- From: syzbot <syzbot+90cf07b4a2473213d16b@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Regression causes a hang on boot with a Comtrol PCI card
- From: Jesse Hathaway <jesse@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 7/7] usb: typec: Add driver for NVIDIA Alt Modes
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: Problem with USB2 devices connected to a hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Explicit status-stage requests for USB gadgets
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- Re: Problem with USB2 devices connected to a hub
- From: Georg Chini <georg@xxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: lan78xx: About 8000 usb interrupts per second when idle
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem with USB2 devices connected to a hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: Problem with USB2 devices connected to a hub
- From: Georg Chini <georg@xxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- [PATCH] USB: UDC: net2280: Remove redundant "if" condition
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: lan78xx: About 8000 usb interrupts per second when idle
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] USB: UDC: net22{80,72}: remove mistaken test of req->zero
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb-storage: Set virt_boundary_mask to avoid SG overflows
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: KASAN: use-after-free Read in dvb_usb_device_exit
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb/hcd: Send a uevent signaling that the host controller has died
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: core: Fix unterminated string returned by usb_string()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- RE: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem with USB2 devices connected to a hub
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- RE: [PATCH V3 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- KASAN: use-after-free Read in v4l2_release
- From: syzbot <syzbot+a4387f5b6b799f6becbf@xxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
- Re: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 7/7] usb: typec: Add driver for NVIDIA Alt Modes
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 6/7] usb: typec: displayport: Export probe and remove functions
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 5/7] usb: typec: ucsi: Support for DisplayPort alt mode
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 4/7] usb: typec: ucsi: Preliminary support for alternate modes
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 3/7] usb: typec: ucsi: ccg: add firmware flashing support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 2/7] usb: typec: ucsi: ccg: add get_fw_info function
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 1/7] i2c: nvidia-gpu: Supply CCGx driver the fw build info
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 0/7] usb: typec: Remaining changes for v5.2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: KASAN: use-after-free Read in dvb_usb_device_exit
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- RE: [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
- Re: [PATCH V6 1/3] USB: serial: f81232: clear overrun flag
- From: Johan Hovold <johan@xxxxxxxxxx>
- RE: [PATCH v2] usb: typec: tcpm: collision avoidance
- From: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
- Re: [EXT] Re: Why there is a refcnt check when we change configfs property
- From: Andrzej Pietrasiewicz <andrzejtp2010@xxxxxxxxx>
- Re: [PATCH] USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2] usb: serial: defer URB submission for ftdi_sio
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 03/14] usb: dwc2: Fix wakeup detected and session request interrupt handlers.
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- Re: WARNING: proc registration bug in snd_info_register
- From: syzbot <syzbot+4d729bd9da724d0282dd@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V3 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- RE: lan78xx: About 8000 usb interrupts per second when idle
- From: <Woojung.Huh@xxxxxxxxxxxxx>
- RE: [PATCH] usb: uas: fix usb subsystem hang after power off hub port
- From: <Kento.A.Kobayashi@xxxxxxxx>
- Re: lan78xx: About 8000 usb interrupts per second when idle
- From: Paul Zimmerman <pauldzim@xxxxxxxxx>
- KASAN: stack-out-of-bounds Read in hfcsusb_probe
- From: syzbot <syzbot+8750abbc3a46ef47d509@xxxxxxxxxxxxxxxxxxxxxxxxx>
- INFO: trying to register non-static key in mxl111sf_ctrl_msg
- From: syzbot <syzbot+5ca0bf339f13c4243001@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: use-after-free Read in snd_info_free_entry
- From: syzbot <syzbot+48df349490c36f9f54ab@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: use-after-free Read in ds_probe
- From: syzbot <syzbot+5620801aaaf778ca83c6@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: use-after-free Read in v4l2_ioctl
- From: syzbot <syzbot+d587871cd33a9bc7c086@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: use-after-free Read in __video_do_ioctl
- From: syzbot <syzbot+5b7575b3f6820232e17c@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: slab-out-of-bounds Read in technisat_usb2_rc_query
- From: syzbot <syzbot+eaaaf38a95427be88f4b@xxxxxxxxxxxxxxxxxxxxxxxxx>
- INFO: trying to register non-static key in ni6501_detach
- From: syzbot <syzbot+cf4f2b6c24aff0a3edf6@xxxxxxxxxxxxxxxxxxxxxxxxx>
- WARNING in __flush_work (3)
- From: syzbot <syzbot+2e1ef9188251d9cc7944@xxxxxxxxxxxxxxxxxxxxxxxxx>
- WARNING: ODEBUG bug in rsi_probe
- From: syzbot <syzbot+1d1597a5aa3679c65b9f@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: lan78xx: About 8000 usb interrupts per second when idle
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH] usb: usbip: fix isoc packet num validation in get_pipe
- From: Malte Leip <malte@xxxxxxxx>
- Re: [PATCH 2/3] usb: typec: fusb302: Implement start_srp_connection_detect
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] usb: typec: fusb302: Revert "Resolve fixed power role contract setup"
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 2/3] usb: typec: fusb302: Implement start_srp_connection_detect
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 1/3] usb: typec: tcpm: Add start_srp_connection_detect callback
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2] usb: typec: tcpm: collision avoidance
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: Bug: VHCI + USB 3.0
- From: "Bollinger, Seth" <Seth.Bollinger@xxxxxxxx>
- Re: [PATCH 3/4] ARM: dts: rockchip: Hook resets up to USB PHYs on rk3288.
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: rockchip: Add quirk for resetting rk3288's dwc2 host on wakeup
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: dwc2: optionally assert phy reset when waking up
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: usb: dwc2: Document quirk to reset PHY upon wakeup
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH 0/4] usb: dwc2: Another attempt handling rk3288's remote wake quirk
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 1/4] dt-bindings: usb: dwc2: Document quirk to reset PHY upon wakeup
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 2/4] usb: dwc2: optionally assert phy reset when waking up
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: rockchip: Add quirk for resetting rk3288's dwc2 host on wakeup
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 3/4] ARM: dts: rockchip: Hook resets up to USB PHYs on rk3288.
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: INFO: trying to register non-static key in vmk80xx_detach
- From: syzbot <syzbot+54c2f58f15fe6876b6ad@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Problem with USB2 devices connected to a hub
- From: Georg Chini <georg@xxxxxxxx>
- Re: INFO: task hung in usb_kill_urb
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v7 3/3] usb: typec: ucsi: ccg: add firmware flashing support
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v7 2/3] i2c: nvidia-gpu: Supply CCGx driver the fw build info
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v7 1/3] usb: typec: ucsi: ccg: add get_fw_info function
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v7 0/3] Add support for firmware update on Cypres CCGx
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- Re: [v2 PATCH 6/6] usb: mtu3: get optional clock by devm_clk_get_optional()
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: Bug: VHCI + USB 3.0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v6 2/2] usb: typec: ucsi: ccg: add firmware flashing support
- From: Ajay Gupta <ajayg@xxxxxxxxxx>
- [RFC PATCH 2/2] usb: typec: ucsi: ccgx: Read the fw build property
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [RFC PATCH 0/2] usb: typec: ucsi: ccgx: FW build device property
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [RFC PATCH 1/2] i2c: nvidia-gpu: Supply CCGx driver the firmware build information
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- INFO: trying to register non-static key in vmk80xx_detach
- From: syzbot <syzbot+54c2f58f15fe6876b6ad@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 2/2] usb: typec: ucsi: ccg: add firmware flashing support
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- INFO: trying to register non-static key in del_timer_sync (2)
- From: syzbot <syzbot+dc4127f950da51639216@xxxxxxxxxxxxxxxxxxxxxxxxx>
- general protection fault in ath6kl_usb_alloc_urb_from_pipe
- From: syzbot <syzbot+ead4037ec793e025e66f@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 0/6] ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH 03/14] usb: dwc2: Fix wakeup detected and session request interrupt handlers.
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH 06/14] usb: dwc2: Add part. power down exit from dwc2_conn_id_status_change().
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- [PATCH 05/14] usb: dwc2: Add port conn. sts. checking in _dwc2_hcd_resume() function.
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- [PATCH 04/14] usb: dwc2: Fix suspend state in host mode for partial power down.
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- [PATCH 03/14] usb: dwc2: Fix wakeup detected and session request interrupt handlers.
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- [PATCH 02/14] usb: dwc2: Add descriptive debug messages for Partial Power Down mode.
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- [PATCH 01/14] usb: dwc2: Fix dwc2_restore_device_registers() function.
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- [PATCH 00/14] usb: dwc2: Fix and improve power saving modes.
- From: Artur Petrosyan <arthur.petrosyan@xxxxxxxxxxxx>
- Re: [PATCH v5 3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v5 2/6] usb: ohci-da8xx: let the regulator framework keep track of use count
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v5 3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v5 1/6] ARM: davinci: add missing sentinels to GPIO lookup tables
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v5 6/6] usb: ohci-da8xx: drop the vbus GPIO
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v5 5/6] ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v5 4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v5 0/6] ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v4 3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- INFO: trying to register non-static key in rtl_c2hcmd_launcher
- From: syzbot <syzbot+1fcc5ef45175fc774231@xxxxxxxxxxxxxxxxxxxxxxxxx>
- WARNING in zd_mac_clear
- From: syzbot <syzbot+74c65761783d66a9c97c@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: stack-out-of-bounds Read in string
- From: syzbot <syzbot+b75b85111c10b8d680f1@xxxxxxxxxxxxxxxxxxxxxxxxx>
- WARNING: proc registration bug in snd_info_card_register
- From: syzbot <syzbot+2e782bf6a60d0fcb932d@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: use-after-free Read in dvb_usb_device_exit
- From: syzbot <syzbot+26ec41e9f788b3eba396@xxxxxxxxxxxxxxxxxxxxxxxxx>
- BUG: corrupted list in snd_info_free_entry
- From: syzbot <syzbot+90cf07b4a2473213d16b@xxxxxxxxxxxxxxxxxxxxxxxxx>
- WARNING: proc registration bug in snd_info_register
- From: syzbot <syzbot+4d729bd9da724d0282dd@xxxxxxxxxxxxxxxxxxxxxxxxx>
- INFO: task hung in usb_kill_urb
- From: syzbot <syzbot+d919b0f29d7b5a4994b9@xxxxxxxxxxxxxxxxxxxxxxxxx>
- KASAN: invalid-free in disconnect_rio
- From: syzbot <syzbot+35f04d136fc975a70da4@xxxxxxxxxxxxxxxxxxxxxxxxx>
- WARNING in spi_register_controller
- From: syzbot <syzbot+c60ddb60b685777d9d59@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: WARNING in rollback_registered_many (2)
- From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
- general protection fault in flexcop_usb_probe
- From: syzbot <syzbot+d93dff37e6a89431c158@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/6] ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH v4 3/6] usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH v4 6/6] usb: ohci-da8xx: drop the vbus GPIO
- From: Sekhar Nori <nsekhar@xxxxxx>
- [PATCH V3 1/7] dt-bindings: usb: hd3ss3220 device tree binding document
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V3 5/7] arm64: defconfig: enable TYPEC_HD3SS3220 config option
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V3 4/7] usb: gadget: udc: renesas_usb3: Use usb_role_switch framework
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V3 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V3 2/7] dt-bindings: usb: renesas_usb3: Add renesas,usb-role-switch property
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- [PATCH V3 0/7] Add USB3.0 and TI HD3SS3220 driver support
- From: Biju Das <biju.das@xxxxxxxxxxxxxx>
- Re: [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Yang Xiao <92siuyang@xxxxxxxxx>
- Re: [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Yang Xiao <92siuyang@xxxxxxxxx>
- Re: [PATCH 1/3] device property: Add fwnode_is_compatible() and device_is_compatible() helpers
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH v5 09/13] usb: roles: Add usb role switch notifier.
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH] [v2]USB:serial:pl2303:add new Pull-Up mode to support PL2303HXD (TYPE_HX)
- From: Charles Yeh <charlesyeh522@xxxxxxxxx>
- [PATCH] USB: s2255 & stkwebcam: fix oops with malicious USB descriptors
- From: Young Xiao <92siuyang@xxxxxxxxx>
- Re: [PATCH] USB:serial:pl2303:Add new PID to support PL2303HXN (TYPE_HXN)
- From: Charles Yeh <charlesyeh522@xxxxxxxxx>
- Re: [PATCH v5 10/13] usb: dwc3: Registering a role switch in the DRD code.
- From: Chen Yu <chenyu56@xxxxxxxxxx>
- Re: [PATCH v5 09/13] usb: roles: Add usb role switch notifier.
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH v5 11/13] hikey960: Support usb functionality of Hikey960
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH v5 10/13] usb: dwc3: Registering a role switch in the DRD code.
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: dwc2: document the vbus-supply property
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- RE: [PATCH 2/4] usb: typec: ucsi: ccg: add firmware flashing support
- From: Ajay Gupta <ajayg@xxxxxxxxxx>
- [PATCH v6 2/2] usb: typec: ucsi: ccg: add firmware flashing support
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v6 1/2] usb: typec: ucsi: ccg: add get_fw_info function
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
- [PATCH v6 0/2] Add support for firmware update on Cypres CCGx
- From: Ajay Gupta <ajaykuee@xxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]