[PATCH] USB: Fix incorrect DMA allocations for local memory pool drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix commit 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of
guestimating DMA capabilities") where local memory USB drivers
erroneously allocate DMA memory instead of pool memory, causing

	OHCI Unrecoverable Error, disabled
	HC died; cleaning up

The order between hcd_uses_dma() and hcd->localmem_pool is now
arranged as in hcd_buffer_alloc() and hcd_buffer_free(), with the
test for hcd->localmem_pool placed first.

As an alternative, one might consider adjusting hcd_uses_dma() with

 static inline bool hcd_uses_dma(struct usb_hcd *hcd)
 {
-	return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA);
+	return IS_ENABLED(CONFIG_HAS_DMA) &&
+		(hcd->driver->flags & HCD_DMA) &&
+		(hcd->localmem_pool == NULL);
 }

One can also consider unsetting HCD_DMA for local memory pool drivers.

Fixes: 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") where local memory USB drivers
Signed-off-by: Fredrik Noring <noring@xxxxxxxxxx>
---
 drivers/usb/core/hcd.c         | 42 +++++++++++++++++-----------------
 drivers/usb/storage/scsiglue.c |  3 ++-
 2 files changed, 23 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f225eaa98ff8..d0f45600b669 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1409,7 +1409,17 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
 		if (hcd->self.uses_pio_for_control)
 			return ret;
-		if (hcd_uses_dma(hcd)) {
+		if (hcd->localmem_pool) {
+			ret = hcd_alloc_coherent(
+					urb->dev->bus, mem_flags,
+					&urb->setup_dma,
+					(void **)&urb->setup_packet,
+					sizeof(struct usb_ctrlrequest),
+					DMA_TO_DEVICE);
+			if (ret)
+				return ret;
+			urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
+		} else if (hcd_uses_dma(hcd)) {
 			if (is_vmalloc_addr(urb->setup_packet)) {
 				WARN_ONCE(1, "setup packet is not dma capable\n");
 				return -EAGAIN;
@@ -1427,23 +1437,22 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 						urb->setup_dma))
 				return -EAGAIN;
 			urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
-		} else if (hcd->localmem_pool) {
-			ret = hcd_alloc_coherent(
-					urb->dev->bus, mem_flags,
-					&urb->setup_dma,
-					(void **)&urb->setup_packet,
-					sizeof(struct usb_ctrlrequest),
-					DMA_TO_DEVICE);
-			if (ret)
-				return ret;
-			urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
 		}
 	}
 
 	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 	if (urb->transfer_buffer_length != 0
 	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
-		if (hcd_uses_dma(hcd)) {
+		if (hcd->localmem_pool) {
+			ret = hcd_alloc_coherent(
+					urb->dev->bus, mem_flags,
+					&urb->transfer_dma,
+					&urb->transfer_buffer,
+					urb->transfer_buffer_length,
+					dir);
+			if (ret == 0)
+				urb->transfer_flags |= URB_MAP_LOCAL;
+		} else if (hcd_uses_dma(hcd)) {
 			if (urb->num_sgs) {
 				int n;
 
@@ -1497,15 +1506,6 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 				else
 					urb->transfer_flags |= URB_DMA_MAP_SINGLE;
 			}
-		} else if (hcd->localmem_pool) {
-			ret = hcd_alloc_coherent(
-					urb->dev->bus, mem_flags,
-					&urb->transfer_dma,
-					&urb->transfer_buffer,
-					urb->transfer_buffer_length,
-					dir);
-			if (ret == 0)
-				urb->transfer_flags |= URB_MAP_LOCAL;
 		}
 		if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
 				URB_SETUP_MAP_LOCAL)))
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 54a3c8195c96..2adcabe060c5 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -135,7 +135,8 @@ static int slave_configure(struct scsi_device *sdev)
 	 * For such controllers we need to make sure the block layer sets
 	 * up bounce buffers in addressable memory.
 	 */
-	if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)))
+	if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
+			(bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
 		blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
 
 	/*
-- 
2.23.0




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux