On Mon, Nov 18, 2019 at 6:57 PM Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> wrote: > > On Mon, Nov 18, 2019 at 06:42:25PM +0100, Andrey Konovalov wrote: > > On Mon, Nov 18, 2019 at 5:40 PM Greg Kroah-Hartman > > <gregkh@xxxxxxxxxxxxxxxxxxx> wrote: > > > > > > On Mon, Nov 18, 2019 at 05:12:34PM +0100, Andrey Konovalov wrote: > > > > On Sat, Nov 16, 2019 at 9:49 AM Greg Kroah-Hartman > > > > <gregkh@xxxxxxxxxxxxxxxxxxx> wrote: > > > > > > > > > > On Fri, Nov 15, 2019 at 05:10:26PM +0100, Andrey Konovalov wrote: > > > > > > On Fri, Nov 15, 2019 at 4:44 PM Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: > > > > > > > > > > > > > > On Fri, 15 Nov 2019, Andrey Konovalov wrote: > > > > > > > > > > > > > > > Hi Greg and Alan, > > > > > > > > > > > > > > > > For USB fuzzing it would be nice to be able to export usb_device_id > > > > > > > > structs from the kernel to facilitate the fuzzer with generating USB > > > > > > > > descriptors that match to actual drivers. The same is required for > > > > > > > > hid_device_id structs, since those are matched separately by the > > > > > > > > usbhid driver (are there other cases like this?). > > > > > > > > > > > > > > > > Currently I have a hacky patch [1] that walks all drivers for USB and > > > > > > > > HID buses and then prints all device ids for those drivers into the > > > > > > > > kernel log. Those are manually parsed and built into the fuzzer [2] > > > > > > > > and then used to generate USB descriptors [3]. > > > > > > > > > > > > > > There are so many different flags for those id structures, parsing and > > > > > > > understanding them must be quite difficult. > > > > > > > > > > > > > > > I'm thinking of making a proper patch that will add a debugfs entry > > > > > > > > like usb/drivers (and usb/hid_drivers?), that can be read to get > > > > > > > > USB/HID device ids for all loaded drivers. Would that be acceptable? > > > > > > > > Or should I use some other interface to do that? > > > > > > > > > > > > > > I can't think of a better way to get the information from a running > > > > > > > kernel. > > > > > > > > > > > > > > There is another possibility, though. If the drivers are built as > > > > > > > modules, the information is already available to userspace tools via > > > > > > > depmod. You could get it from the modules.dep.bin file. This has the > > > > > > > advantage that it will work even for drivers that aren't currently > > > > > > > loaded. > > > > > > > > > > > > This is the same thing Greg mentions above, right? > > > > > > > > > > Yes. > > > > > > > > > > > Would this work for drivers that are built into the kernel (as =y)? > > > > > > > > > > No, sorry. There has not been any need to export that information to > > > > > userspace as nothing has ever needed that. > > > > > > > > > > The only reason we exported that at all was to allow modules to > > > > > auto-load to handle the device. > > > > > > > > OK, I see. Ideally we would want to support both builtin drivers and > > > > modules. I'll then implement the approach with exporting the ids > > > > through debugfs. I'll send a patch once I have it. > > > > > > Note, this is part of the build/link process (see what > > > MODULE_DEVICE_TABLE() does), so I don't know if you will be able to do > > > it in debugfs very easily. > > > > Take a look at the patch I've linked [1]. It iterates all drivers on > > the USB bus via bus_for_each_drv and then iterates both builtin ids > > (in usb_device_id_dump_static) and the ones that come from modules (in > > usb_device_id_dump_dynamic) (at least that's how I understand the code > > that I've written :). The patch just does that in a weird place and > > prints ids to kernel log. It seems it should be easy to change it to > > do the same in a read() handler of a debugfs entry. > > > > [1] https://github.com/google/syzkaller/blob/master/tools/syz-usbgen/usb_ids.patch > > Iterating over all of that is a mess, why not stick with the stuff we > already are generating for modules to use? > > > > Why not put it in /sys/module/MODULE_NAME/ ? > > > > I can look into this, if that's what you prefer. In this case we'll > > need to iterate over all dirs in /sys/module to find the ones that > > export some USB ids. Seems less convenient than a single debugfs file > > approach, but would also work AFAIU. > > It could be done at build time, like the MODULE_DEVICE_TABLE() logic > works, and that way you get it for all bus types, not just USB. And > this is a module issue really, right? Yes, the mapping from module name > to driver name is not always the same, but it should be close. I've tried to change MODULE_DEVICE_TABLE to always emit a device table regardless of whether a module is being compiled or not. This doesn't work just like that, because many modules use the same name for the device table, and I get linking errors. Is this the approach you had in mind? What would you suggest to do with name clash issue? > > Otherwise, something in the driver core would be good to do, again, that > way you get this for all busses/drivers. Could you point me to some source files where this would go into? AFAIU with this we'll still need to implement a pretty printer for each device table type, right?
