Hi Johan,
Il giorno lun 18 nov 2019 alle ore 14:32 Daniele Palmas
<dnlplm@xxxxxxxxx> ha scritto:
>
> Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet
> to be sent if out data size is equal to the endpoint max size.
>
> Signed-off-by: Daniele Palmas <dnlplm@xxxxxxxxx>
> ---
Just to make sure that this time the patch arrived properly.
Thanks,
Daniele
> drivers/usb/serial/option.c | 8 ++++++++
> drivers/usb/serial/usb-wwan.h | 1 +
> drivers/usb/serial/usb_wwan.c | 9 +++++++++
> 3 files changed, 18 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index e9491d400a24..c13e063cb399 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -567,6 +567,9 @@ static void option_instat_callback(struct urb *urb);
> /* Interface must have two endpoints */
> #define NUMEP2 BIT(16)
>
> +/* Device needs ZLP */
> +#define ZLP BIT(17)
> +
>
> static const struct usb_device_id option_ids[] = {
> { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
> @@ -1196,6 +1199,8 @@ static const struct usb_device_id option_ids[] = {
> .driver_info = NCTRL(0) | RSVD(1) },
> { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
> .driver_info = NCTRL(0) },
> + { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
> + .driver_info = NCTRL(0) | ZLP },
> { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
> { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
> .driver_info = RSVD(1) },
> @@ -2097,6 +2102,9 @@ static int option_attach(struct usb_serial *serial)
> if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
> data->use_send_setup = 1;
>
> + if (device_flags & ZLP)
> + data->use_zlp = 1;
> +
> spin_lock_init(&data->susp_lock);
>
> usb_set_serial_data(serial, data);
> diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
> index 1c120eaf4091..934e9361cf6b 100644
> --- a/drivers/usb/serial/usb-wwan.h
> +++ b/drivers/usb/serial/usb-wwan.h
> @@ -38,6 +38,7 @@ struct usb_wwan_intf_private {
> spinlock_t susp_lock;
> unsigned int suspended:1;
> unsigned int use_send_setup:1;
> + unsigned int use_zlp:1;
> int in_flight;
> unsigned int open_ports;
> void *private;
> diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
> index 7e855c87e4f7..8066b5e2d305 100644
> --- a/drivers/usb/serial/usb_wwan.c
> +++ b/drivers/usb/serial/usb_wwan.c
> @@ -228,6 +228,15 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
> } else {
> intfdata->in_flight++;
> spin_unlock_irqrestore(&intfdata->susp_lock, flags);
> + if (intfdata->use_zlp) {
> + unsigned int ep_maxp;
> +
> + ep_maxp = usb_maxpacket(port->serial->dev,
> + this_urb->pipe, 1);
> +
> + if (ep_maxp && (todo % ep_maxp == 0))
> + this_urb->transfer_flags |= URB_ZERO_PACKET;
> + }
> err = usb_submit_urb(this_urb, GFP_ATOMIC);
> if (err) {
> dev_err(&port->dev,
> --
> 2.17.1
>
