Add "hub,interval" property to usb-device, so hub device can override endpoint descriptor's bInterval. When we know reducing autosuspend delay for built-in HIDs is better for power saving, we can reduce it to the optimal value. But if a parent hub has a long bInterval, mouse lags a lot from more frequent autosuspend. So this enables overriding bInterval for a hard wired hub device only when we know that reduces the power consumption. Signed-off-by: Ikjoon Jang <ikjn@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/usb-device.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 036be172b1ae..44bef2ff2704 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -66,6 +66,9 @@ Required properties for host-controller nodes with device nodes: - #size-cells: shall be 0 +Optional properties for hub nodes +- hub,interval: bInterval of status change endpoint. The range is 1-255. + Example: &usb1 { /* host controller */ @@ -75,6 +78,7 @@ Example: hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; + hub,interval = <8>; }; device@2 { /* device connected to port 2 */ -- 2.24.0.393.g34dc348eaf-goog