> On 06-12-2019 20:19, Thierry Reding wrote: > > On Fri, Dec 06, 2019 at 04:20:04PM +0530, Nagarjuna Kristam wrote: >> Add usb-role-switch property for Tegra210 and Tegra186 platforms. This >> entry is used by XUSB pad controller driver to register for role changes >> for OTG/Peripheral capable USB 2 ports. >> >> Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx> >> --- >> Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt >> index 9fb682e..0f19ed6 100644 >> --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt >> +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt >> @@ -179,6 +179,10 @@ Optional properties: >> is internal. In the absence of this property the port is considered to be >> external. >> - vbus-supply: phandle to a regulator supplying the VBUS voltage. >> +- usb-role-switch: boolean property to indicate use of USB Role Switch. > That first sentence here seems a bit useless and vague. It doesn't > really convey anything other than the name already does. Perhaps > something like: > > Boolean property to indicate that the port support OTG. If > present, the port supports switching between USB host and > peripheral roles. > Will update this accordingly. >> + This property is MUST for OTG,Peripheral capable USB 2 ports. Connector > If this is mandatory, why not add it to the list of required properties? > I guess since it's only mandatory for ports that support OTG, perhaps we > could add a section "Required properties for OTG capable ports:" or > something like that? Then you can also omit the second sentence in the > description. > Will add section "Required properties for OTG/Peripheral capable ports:" under ports and add usb-role-switch there. >> + should be added as subnode, see connector.txt. vbus-gpio in connector is > There's no file called "connector.txt". Are you referring to > > Documentation/devicetree/bindings/connector/usb-connector.txt > > ? Also, that file calls the property "vbus-gpios" and lists it as > optional. What would happen if we don't specify it? Doesn't that just > mean that we can't support role detection? > After going through other bindings found usb/usb-conn-gpio.txt is the one that should be referred. Will update accordingly. All details on gpios are documented clearly in usb/usb-conn-gpio.txt. >> + Mandatory. > "mandatory" > > Thierry > >> Will update. Thanks, Nagarjuna >> ULPI ports: >> ----------- >> -- >> 2.7.4 >>
