[PATCH 00/18] Tegra XUSB OTG support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series adds OTG support on XUSB hardware used in Tegra210 and
Tegra186 SoCs.

This patchset is composed with :
 - dt bindings of XUSB Pad Controller
 - dt bindings for XUSB device Driver
 - Tegra PHY driver for usb-role-switch and usb-phy
 - Tegra XUSB host mode driver to support OTG mode
 - Tegra XUSB device mode driver to use usb-phy and multi device mode
 - dts for XUSB pad controller
 - dts for xudc

Tegra Pad controller driver register for role switch updates for
OTG/peripheral capable USB ports and adds usb-phy for that corresponding
USB ports.

Host and Device mode drivers gets usb-phy from USB2's phy and registers
notifier for role changes to perform corresponding role tasks.

Tests done:
 - device mode support using micro-B USB cable connection between ubuntu
   host and DUT on micro-B port
 - host mode support by connecting pen-drive to micro USB port on DUT
   using micro-B OTG cable.
 - toggling between these 2 modes by hot plugging corresponding cables.

DUT: Jetson-tx1, Jetson tx2.

Nagarjuna Kristam (18):
  dt-bindings: phy: tegra-xusb: Add usb-role-switch
  dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
  phy: tegra: xusb: Add usb-role-switch support
  phy: tegra: xusb: Add usb-phy support
  phy: tegra: xusb: Add support to get companion USB 3 port
  phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210
  phy: tegra: xusb: Add set_mode support for utmi phy on Tegra186
  usb: xhci-tegra: Add OTG support
  usb: gadget: tegra-xudc: Remove usb-role-switch support
  usb: gadget: tegra-xudc: Add usb-phy support
  usb: gadget: tegra-xudc: use phy_set_mode to set/unset device mode
  usb: gadget: tegra-xudc: support multiple device modes
  arm64: tegra: update OTG port entries for jetson-tx1
  arm64: tegra: update OTG port entries for jetson-tx2
  arm64: tegra: Add xudc node for Tegra210
  arm64: tegra: Enable xudc on Jetson TX1
  arm64: tegra: Add xudc node for Tegra186
  arm64: tegra: Enable xudc node on Jetson TX2

 .../bindings/phy/nvidia,tegra124-xusb-padctl.txt   |   4 +
 .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 204 +++++++++++++++
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |  23 +-
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  19 ++
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi     |  34 ++-
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  19 ++
 drivers/phy/tegra/Kconfig                          |   1 +
 drivers/phy/tegra/xusb-tegra186.c                  | 109 ++++++--
 drivers/phy/tegra/xusb-tegra210.c                  | 126 ++++++++--
 drivers/phy/tegra/xusb.c                           | 132 ++++++++++
 drivers/phy/tegra/xusb.h                           |   5 +
 drivers/usb/gadget/udc/tegra-xudc.c                | 277 ++++++++++++++-------
 drivers/usb/host/xhci-tegra.c                      | 226 ++++++++++++++++-
 include/linux/phy/tegra/xusb.h                     |   2 +
 14 files changed, 1042 insertions(+), 139 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml

-- 
2.7.4




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux