Linux SPI

• Thread Index

• Applied "spi: SPI_FSL_DSPI should depend on HAS_DMA" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: Pre-initialize ret in fsl_lpspi_transfer_one_msg()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: armada-3700: fix unsigned compare than zero on irq" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-ath79: use gpio_set_value_cansleep for GPIO chip select" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-ath79: support multiple internal chip select lines" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi/for-next] spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: SPI_FSL_DSPI should depend on HAS_DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Alan Tull <atull@xxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: add check_finished() callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: lantiq-ssc: add support for Lantiq SSC SPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: SPI_FSL_DSPI should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: SPI_FSL_DSPI should depend on HAS_DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: SPI_FSL_DSPI should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: fsl-lpspi: Pre-initialize ret in fsl_lpspi_transfer_one_msg()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [GIT PULL] spi updates for v4.10
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi/for-next] spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: armada-3700: fix unsigned compare than zero on irq
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: armada-3700: fix unsigned compare than zero on irq
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] spi: armada-3700: fix unsigned compare than zero on irq
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: armada-3700: fix unsigned compare than zero on irq
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: spidev instantiated from DT
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: spidev instantiated from DT
  • From: "Giuseppe Lippolis" <giu.lippolis@xxxxxxxxx>
• [PATCH spi/for-next] spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Re: spidev instantiated from DT
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] spi: lantiq-ssc: add support for Lantiq SSC SPI controller
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 1/2] spi: add check_finished() callback
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 0/2] spi: lantiq-ssc: add support for Lantiq SSC SPI controller
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• spidev instantiated from DT
  • From: "Giuseppe Lippolis" <giu.lippolis@xxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-ath79: use gpio_set_value_cansleep for GPIO chip select
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 2/2] spi: spi-ath79: use gpio_set_value_cansleep for GPIO chip select
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 1/2] spi: spi-ath79: support multiple internal chip select lines
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
• Re: [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v9 1/3] of: Add vendor prefix for Lattice Semiconductor
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v9 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v9 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: mvebu: fix baudrate calculation for armada variant
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add support for Armada 3700 SPI Controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: armada-3700: Add documentation for the Armada 3700 SPI Controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2] spi: mvebu: fix baudrate calculation for armada variant
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [spi:fix/mvbeu 1/1] drivers/spi/spi-orion.c:192:8: error: 'sspr' undeclared
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH v4 0/4] Add support for the Armada 3700 SPI controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/4] spi: Add support for Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/4] arm64: dts: marvell: Add definition of SPI controller for Armada 3700
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/4] spi: armada-3700: Add documentation for the Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 1/2] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 0/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH] spi: mvebu: fix baudrate calculation for armada variants
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 2/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v3 2/5] spi: armada-3700: Add support for the FIFO mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 1/2] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 2/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 2/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v3 2/5] spi: armada-3700: Add support for the FIFO mode
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] spi: Add basic support for Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: davinci: Allow device tree devices to use DMA
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 2/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 1/2] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 0/2] mtd: spi-nor: add a stateless method to support memory size above 128Mib
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• RE: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Re: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• RE: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Re: [PATCH v3 3/5] spi: armada-3700: Add documentation for the Armada 3700 SPI Controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: spi: Add documentation for the Armada 3700 SPI Controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/5] spi: armada-3700: Add support for the FIFO mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v3 1/5] spi: Add basic support for Armada 3700 SPI Controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-pxa2xx: Remove unused macro" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: quit reading rx fifo under error condition" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: use GPL as module license" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [Patch V1 1/2] spi: fsl-lpspi: use GPL as module license
  • From: Gao Pan <pandy.gao@xxxxxxx>
• [Patch V1 2/2] spi: fsl-lpspi: quit reading rx fifo under error condition
  • From: Gao Pan <pandy.gao@xxxxxxx>
• Applied "spi: fsl-espi: fix ioread16/iowrite16 endianness" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v2, 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• [PATCH v3 1/5] spi: Add basic support for Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/5] spi: armada-3700: Add support for the FIFO mode
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/5] spi: armada-3700: Add documentation for the Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/5] arm64: dts: marvell: Add definition of SPI controller for Armada 3700
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/5] Add support for the Armada 3700 SPI controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• RE: [Patch V1 2/2] imx: spi: read lpspi tx/rx fifo size in probe()
  • From: Pandy Gao <pandy.gao@xxxxxxx>
• [PATCH] spi: fsl-espi: fix ioread16/iowrite16 endianness
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: fsl-lpspi: use wait_for_completion_timeout() while waiting transfer done" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: read lpspi tx/rx fifo size in probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: determine need for byte swap only once" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: eliminate need for linearization when writing to hardware" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: remove unused linearization code" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: eliminate need for linearization when reading from hardware" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Patch V1 2/2] imx: spi: read lpspi tx/rx fifo size in probe()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/5] spi: armada-3700: Add support for the FIFO mode
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] arm64: dts: marvell: Add definition of SPI controller for Armada 3700
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] Add support for the Armada 3700 SPI controller
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: spi: Add documentation for the Armada 3700 SPI Controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: orion: fix comment to mention MVEBU
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: orion: fix comment to mention MVEBU
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] arm64: dts: marvell: Add definition of SPI controller for Armada 3700
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/5] Add support for the Armada 3700 SPI controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/5] spi: Add basic support for Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: spi: Add documentation for the Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/5] spi: armada-3700: Add support for the FIFO mode
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• RE: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Re: [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: marvell: Add definition of SPI controller for Armada 3700
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: marvell: Add definition of SPI controller for Armada 3700
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] spi: armada-3700: Add support for the FIFO mode
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] spi: Add basic support for Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/5] arm64: dts: marvell: Add definition of SPI controller for Armada 3700
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] dt-bindings: spi: Add documentation for the Armada 3700 SPI Controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] Add support for the Armada 3700 SPI controller
  • From: Romain Perier <romain.perier@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v2, 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v2] mtd: m25p80: consider max message size in m25p80_read
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2, 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [Patch V1 2/2] imx: spi: read lpspi tx/rx fifo size in probe()
  • From: Gao Pan <pandy.gao@xxxxxxx>
• [Patch V1 1/2] spi: imx: use wait_for_completion_timeout() while waiting transfer done
  • From: Gao Pan <pandy.gao@xxxxxxx>
• [LINUX RFC v4 1/4] spi: adding support for data stripe feature in core
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX RFC v4 0/4] Add stripe support for ZynqMP SoC GQSPI controller
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX RFC v4 4/4] spi: zynqmp: gqspi: add support for stripe feature
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX RFC v4 2/4] mtd: add spi_device instance to spi_nor struct
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX RFC v4 3/4] mtd: spi-nor: add stripe support
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [PATCH 4/4] spi: fsl-espi: remove unused linearization code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/4] spi: fsl-espi: eliminate need for linearization when reading from hardware
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4] spi: fsl-espi: eliminate need for linearization when writing to hardware
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4] spi: fsl-espi: determine need for byte swap only once
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/4] spi: fsl-espi: eliminate linearization into intermediate buffer
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: atmel: trivial: remove unused fields in DMA structure" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Use SPI core DMA mapping framework" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: remove the use of private channel fields" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: use prepare_transfer_hardware() for lpspi" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: replace schedule() with cond_resched()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: xlp: Fix module autoload for OF registration" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: jcore: Fix module autoload for OF registration" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: ath79: Fix module autoload for OF registration" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: trivial: move info banner to latest probe action" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-axi: Fix module autoload" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Use core SPI_MASTER_MUST_[RT]X handling" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: fix potential shift truncation" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: atmel: trivial: move info banner to latest probe action
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/5] spi: atmel: trivial: move info banner to latest probe action
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 3/5] spi: atmel: Use SPI core DMA mapping framework
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 2/5] spi: atmel: Use core SPI_MASTER_MUST_[RT]X handling
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 5/5] spi: atmel: remove the use of private channel fields
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 4/5] spi: atmel: trivial: remove unused fields in DMA structure
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 0/5] spi: atmel: enhance the DMA handling
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [Patch V1 1/3] spi: imx: replace schedule() with cond_resched()
  • From: Gao Pan <pandy.gao@xxxxxxx>
• [Patch V1 2/3] spi: imx: fix potential shift truncation
  • From: Gao Pan <pandy.gao@xxxxxxx>
• [Patch V1 3/3] spi: imx: use prepare_transfer_hardware() for lpspi
  • From: Gao Pan <pandy.gao@xxxxxxx>
• RE: [bug report] spi: imx: add lpspi bus driver
  • From: Pandy Gao <pandy.gao@xxxxxxx>
• RE: [Patch V3 2/2] spi: imx: add lpspi bus driver
  • From: Pandy Gao <pandy.gao@xxxxxxx>
• [bug report] spi: imx: add lpspi bus driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/4] spi: jcore: Fix module autoload for OF registration
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 4/4] spi: ath79: Fix module autoload for OF registration
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 3/4] spi: xlp: Fix module autoload for OF registration
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 0/4] spi: Fix module autoload for different platform drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 1/4] spi: spi-axi: Fix module autoload
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Applied "spi: imx: add devicetree binding for lpspi" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [Patch V3 1/2] spi: imx: add devicetree binding for lpspi
  • From: Gao Pan <pandy.gao@xxxxxxx>
• Applied "spi: imx: add lpspi bus driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Patch V3 2/2] spi: imx: add lpspi bus driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Fix incorrect DMA setup" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: use sg_next for walking through the allocated scatterlist table" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [Patch V3 2/2] spi: imx: add lpspi bus driver
  • From: Gao Pan <pandy.gao@xxxxxxx>
• Applied "spi: spi-fsl-dspi: Fix continuous selection format" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Fix incorrect freeing of DMA allocated buffers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-topcliff-pch: Remove some dead code" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/4] spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: use sg_next for walking through the allocated scatterlist table
  • From: Juan Gutierrez <juan.gutierrez@xxxxxxx>
• RE: [Patch V2 1/2] spi: imx: add lpspi bus driver
  • From: Pandy Gao <pandy.gao@xxxxxxx>
• Re: [PATCH] spi: spi-ti-qspi: reinit of completion variable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-ti-qspi: reinit of completion variable
  • From: prahlad venkata <prahlad.eee@xxxxxxxxx>
• [PATCH v3 1/3] spi: spi-fsl-dspi: Fix incorrect DMA setup
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v3 3/3] spi: spi-fsl-dspi: Fix incorrect freeing of DMA allocated buffers
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v3 2/3] spi: spi-fsl-dspi: Fix continuous selection format
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v3 0/3] Fixes for Vybrid SPI DMA implementation
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• Re: [PATCH v2 4/4] spi: spi-fsl-dspi: Minor code cleanup and error path fixes
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH v2 2/4] spi: spi-fsl-dspi: Fix continuous selection format
  • From: maitysanchayan@xxxxxxxxx
• [PATCH] spi: use sg_next for walking through the allocated scatterlist table
  • From: Juan Gutierrez <juan.gutierrez@xxxxxxx>
• Re: [PATCH v2 4/4] spi: spi-fsl-dspi: Minor code cleanup and error path fixes
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 3/4] spi: spi-fsl-dspi: Fix incorrect DMA setup
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 2/4] spi: spi-fsl-dspi: Fix continuous selection format
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v2 1/4] spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH v2] spi: make architecture specific hardware depend on the associated hardware
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/4] spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
  • From: maitysanchayan@xxxxxxxxx
• Applied "spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Add support for R-Car M3-W" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/4] spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: sh-msiof: Add support for R-Car M3-W
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [Patch V2 1/2] spi: imx: add lpspi bus driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: davinci: Allow device tree devices to use DMA
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH v2 3/4] spi: spi-fsl-dspi: Fix incorrect DMA setup
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 4/4] spi: spi-fsl-dspi: Minor code cleanup and error path fixes
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 0/4] Fixes for Vybrid SPI DMA implementation
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 2/4] spi: spi-fsl-dspi: Fix continuous selection format
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v2 1/4] spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• Re: [PATCH v2] spi: make architecture specific hardware depend on the associated hardware
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2] spi: make architecture specific hardware depend on the associated hardware
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• Re: [PATCH] spi: davinci: Allow device tree devices to use DMA
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: davinci: Allow device tree devices to use DMA
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] spi: spi-pxa2xx: Remove unused macro
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH] spi: davinci: Allow device tree devices to use DMA
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] spi: spi-fsl-dspi: Fix incorrect DMA setup
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH] spi: spi-topcliff-pch: Remove some dead code
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v8 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v4 1/2] of: Add vendor prefix for Lattice Semiconductor
  • From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
• Re: [PATCH v8 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
• Re: [PATCH v4 1/2] of: Add vendor prefix for Lattice Semiconductor
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Applied "spi: fsl-espi: set spi_master members min_speed_hz and max_speed_hz" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: simplify of_fsl_espi_suspend" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] spi: spi-fsl-dspi: Fix incorrect DMA setup
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH 3/4] spi: spi-fsl-dspi: Fix continuous selection format
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH 3/4] spi: spi-fsl-dspi: Fix continuous selection format
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 2/4] spi: spi-fsl-dspi: Fix incorrect DMA setup
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 1/4] spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH 4/4] spi: spi-fsl-dspi: Minor code cleanup and error path fixes
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH 2/4] spi: spi-fsl-dspi: Fix incorrect DMA setup
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH 0/4] Fixes for Vybrid SPI DMA implementation
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH 3/4] spi: spi-fsl-dspi: Fix continuous selection format
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH 1/4] spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• RE: [Patch V2 1/2] spi: imx: add lpspi bus driver
  • From: Pandy Gao <pandy.gao@xxxxxxx>
• Re: [Patch V2 1/2] spi: imx: add lpspi bus driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: fsl-espi: set spi_master members min_speed_hz and max_speed_hz
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] spi: fsl-espi: simplify of_fsl_espi_suspend
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: atmel: fix indenting in atmel_spi_gpio_cs()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-ti-qspi: reinit of completion variable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-ti-qspi: reinit of completion variable
  • From: Prahlad V <prahlad.eee@xxxxxxxxx>
• RE: [Patch v1 1/2] spi: imx: add lpspi bus driver
  • From: Pandy Gao <pandy.gao@xxxxxxx>
• [Patch V2 2/2] spi: imx: add devicetree binding for lpspi
  • From: Gao Pan <pandy.gao@xxxxxxx>
• [Patch V2 1/2] spi: imx: add lpspi bus driver
  • From: Gao Pan <pandy.gao@xxxxxxx>
• Re: fsl-espi, m25p80 and max_transfer_size / max_message_size
  • From: Michael Walle <michael@xxxxxxxx>
• Re: fsl-espi, m25p80 and max_transfer_size / max_message_size
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v8 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Rob Herring <robh@xxxxxxxxxx>
• [Patch v1 1/2] spi: imx: add lpspi bus driver
  • From: Gao Pan <pandy.gao@xxxxxxx>
• Re: [patch] spi: atmel: fix indenting in atmel_spi_gpio_cs()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• fsl-espi, m25p80 and max_transfer_size / max_message_size
  • From: Michael Walle <michael@xxxxxxxx>
• [patch] spi: atmel: fix indenting in atmel_spi_gpio_cs()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Applied "spi: fsl-espi: migrate relevant parts of mpc8xxx_spi_probe and of_mpc8xxx_spi_probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: introduce struct fsl_espi_cs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: factor out fsl_espi_init_regs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: introduce struct fsl_espi" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: separate fsl-espi from fsl-lib completely" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Patch v1 1/2] spi: imx: add lpspi bus driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-pxa2xx: Remove unused macro
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [Patch v1 2/2] spi: imx: add devicetree binding for lpspi
  • From: Gao Pan <pandy.gao@xxxxxxx>
• [PATCH 01/10] spi: fsl-espi: remove usage of pdata->initial_spmode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 06/10] spi: fsl-espi: migrate relevant parts of mpc8xxx_spi_probe and of_mpc8xxx_spi_probe
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 09/10] spi: fsl-espi: introduce struct fsl_espi
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 02/10] spi: fsl-espi: don't set pdata->cs_control
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 04/10] spi: fsl-espi: remove usage of mpc8xxx_spi->irq
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 05/10] spi: fsl-espi: remove usage of mpc8xxx_spi->flags
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 10/10] spi: fsl-espi: separate fsl-espi from fsl-lib completely
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 08/10] spi: fsl-espi: factor out fsl_espi_init_regs
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 00/10] spi: fsl-espi: make fsl-espi independent of fsl-lib
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 07/10] spi: fsl-espi: introduce struct fsl_espi_cs
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 03/10] spi: fsl-espi: remove remaining usage of struct fsl_spi_platform_data
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: fsl-espi: add support for ESPI RXSKIP mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: add support for dual output read mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Add DMA support for Vybrid" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3] spi: spi-fsl-dspi: Add DMA support for Vybrid
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: rspi: avoid uninitialized variable access
  • From: Hiep Cao Minh <cm-hiep@xxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v3] spi: spi-fsl-dspi: Add DMA support for Vybrid
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• Re: [PATCH] spi: rspi: avoid uninitialized variable access
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] spi: rspi: avoid uninitialized variable access
  • From: Hiep Cao Minh <cm-hiep@xxxxxxxxxxx>
• Re: [PATCH v2] spi: rspi: rewrites the name of the function
  • From: Hiep Cao Minh <cm-hiep@xxxxxxxxxxx>
• [PATCH 2/2] spi: fsl-espi: add support for dual output read mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/2] spi: fsl-espi: add support for ESPI RXSKIP mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Marek Vasut <marex@xxxxxxx>
• Applied "spi: s3c64xx: Allow driver to build if COMPILE_TEST is enabled" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: use managed resource for gpio chip select" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: rspi: avoid uninitialized variable access" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: rspi: rewrites the name of the function
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: atmel: use managed resource for gpio chip select
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: atmel: use managed resource for gpio chip select
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] spi: make architecture specific hardware depend on the associated hardware
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: rspi: avoid uninitialized variable access
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: atmel: use managed resource for gpio chip select
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: rspi: avoid uninitialized variable access
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] spi: rspi: avoid uninitialized variable access
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
• [PATCH v2] spi: atmel: use managed resource for gpio chip select
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH] spi: rspi: avoid uninitialized variable access
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2] spi: rspi: rewrites the name of the function
  • From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
• Re: [PATCH] ARM: spi: rewrites the name of the function.
  • From: Hiep Cao Minh <cm-hiep@xxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
• [PATCH] spi: s3c64xx: Allow driver to build if COMPILE_TEST is enabled
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
• Re: [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v8 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] spi: make architecture specific hardware depend on the associated hardware
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• Re: [PATCH] spi: make architecture specific hardware depend on the associated hardware
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH/RFC] spi: sh-msiof: Fix MSIOF address for DMAC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC] spi: sh-msiof: Fix DMA transfer size check
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH/RFC] spi: sh-msiof: Fix DMA transfer size check
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• [PATCH/RFC] spi: sh-msiof: Fix MSIOF address for DMAC
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Re: [PATCH] spi: atmel: use managed resource for gpio chip select
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] ARM: spi: rewrites the name of the function.
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v8 1/3] of: Add vendor prefix for Lattice Semiconductor
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v8 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v8 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: spi: rewrites the name of the function.
  • From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
• Re: [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: spi supports 32bytes buffer for DUAL and QUAD
  • From: Hiep Cao Minh <cm-hiep@xxxxxxxxxxx>
• Re: Applied "spi: rspi: supports 32bytes buffer for DUAL and QUAD" to the spi tree
  • From: Hiep Cao Minh <cm-hiep@xxxxxxxxxxx>
• Re: [PATCH 0/1] ARM: spi supports 32bytes buffer for DUAL and QUAD
  • From: Hiep Cao Minh <cm-hiep@xxxxxxxxxxx>
• [PATCH] spi: make architecture specific hardware depend on the associated hardware
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• Re: [PATCH 1/1] ARM: spi supports 32bytes buffer for DUAL and QUAD
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• [PATCH 2/2] spi: fsl-espi: don't write ESPI_SPMODE register if the mode doesn't change
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/2] spi: fsl-espi: remove unneeded call to fsl_espi_setup_transfer
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: fsl-espi: remove unneeded call to fsl_espi_setup_transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: don't write ESPI_SPMODE register if the mode doesn't change" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Applied "spi: rspi: supports 32bytes buffer for DUAL and QUAD" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] ARM: spi supports 32bytes buffer for DUAL and QUAD
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/1] ARM: spi supports 32bytes buffer for DUAL and QUAD
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: spidev_test: Fix input file check when transferring file
  • From: Joshua Clayton <stillcompiling@xxxxxxxxx>
• [PATCH] spi: spidev_test: Fix input file check when transferring file
  • From: Michal Vokáč <vokac.m@xxxxxxxxx>
• [PATCH 1/1] ARM: spi supports 32bytes buffer for DUAL and QUAD
  • From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
• [PATCH 0/1] ARM: spi supports 32bytes buffer for DUAL and QUAD
  • From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
• [PATCH v7 1/3] of: Add vendor prefix for Lattice Semiconductor
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v7 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v7 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Applied "spi: sun6i: Support Allwinner H3 SPI controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sun6i: Add binding for Allwinner H3 SPI controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: set spi_bus_clk for mx21 and mx27" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: dts: sun8i: Add SPI controller node in H3
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] spi: sun6i: Support Allwinner H3 SPI controller
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: imx: set spi_bus_clk for mx21 and mx27
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxxxx>
• [PATCH v6 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 1/3] of: Add vendor prefix for Lattice Semiconductor
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 3/3] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/3] of: Add vendor prefix for Lattice Semiconductor
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] spi fixes for v4.9
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] of: Add vendor prefix for Lattice Semiconductor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/4] spi: sun6i: Add binding for Allwinner H3 SPI controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v4 1/2] of: Add vendor prefix for Lattice Semiconductor
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/2] fpga: Add support for Lattice iCE40 FPGAs
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Applied "spi: dspi: clear SPI_SR before enable interrupt" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sun4i: Allow transfers larger than FIFO size" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: fix support for all available clock rates" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: small fix to error path in fsl_espi_irq" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] mtd: m25p80: consider max message size in m25p80_read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] mtd: m25p80: consider max message size in m25p80_read
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• [PATCH] spi: fsl-espi: fix support for all available clock rates
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] spi: fsl-espi: small fix to error path in fsl_espi_irq
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: fsl-espi: fix merge conflict for commit "avoid processing uninitalized data on error"" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: improve check for SPI_QE_CPU_MODE" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: fix and improve writing to TX FIFO" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: Rename len in struct mpc8xxx_spi to rx_len and make it unsigned" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: simplify and inline function fsl_espi_change_mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: extend and improve transfer error handling" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: make better use of the RX FIFO" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: fix and improve reading from RX FIFO" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 01/09] spi: fsl-espi: improve check for SPI_QE_CPU_MODE
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: spi-fsl-dspi: Add DMA support for Vybrid
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 0/4] Support H3 SPI controller
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: sun8i: Add SPI controller node in H3
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH v2 3/4] spi: sun6i: Add binding for Allwinner H3 SPI controller
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH v2 4/4] spi: sun6i: Support Allwinner H3 SPI controller
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH v2 1/4] ARM: dts: sun8i: Add SPI pinctrl node in H3
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH v2] mtd: m25p80: consider max message size in m25p80_read
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH RESEND] mtd: m25p80: consider max message size in m25p80_read
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH RESEND] mtd: m25p80: consider max message size in m25p80_read
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 09/09] spi: fsl-espi: add support for dual read mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 08/09] spi: fsl-espi: add support for RXSKIP mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 07/09] spi: fsl-espi: extend and improve transfer error handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 06/09] spi: fsl-espi: make better use of the RX FIFO
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 05/09] spi: fsl-espi: fix and improve reading from RX FIFO
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 04/09] spi: fsl-espi: simplify and inline function fsl_espi_change_mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 03/09] spi: fsl-espi: Rename len in struct mpc8xxx_spi to rx_len and make it unsigned
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 02/09] spi: fsl-espi: fix and improve writing to TX FIFO
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 01/09] spi: fsl-espi: improve check for SPI_QE_CPU_MODE
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] spi: fsl-espi: fix merge conflict for commit "avoid processing uninitalized data on error"
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: Merge problem: Re: Applied "spi: fsl-espi: avoid processing uninitalized data on error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Merge problem: Re: Applied "spi: fsl-espi: avoid processing uninitalized data on error" to the spi tree
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 02/11] spi: fsl-espi: remove unneeded check for SPI_QE_CPU_MODE
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Alex Gagniuc <mr.nuke.me@xxxxxxxxx>
• Applied "spi: change post transfer udelay() to usleep_range() for long delays" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: avoid processing uninitalized data on error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v7] spi: sun4i: Allow transfers larger than FIFO size
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [PATCH] spi: sun4i: Allow transfers larger than FIFO size
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [v4.9 PATCH] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 17/28] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 17/28] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Why isn't spi_set_cs() public?
  • From: Joel Holdsworth <joel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mark device nodes only in case of successful instantiation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 17/28] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 17/28] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 17/28] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 17/28] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: mark device nodes only in case of successful instantiation" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: support DMA for imx35" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: omap2-mcspi: Remove redundant return value check of platform_get_resource()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: mark device nodes only in case of successful instantiation
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: imx: support DMA for imx35
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH -next] spi: omap2-mcspi: Remove redundant return value check of platform_get_resource()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH 3/3] spi: sun6i: Use the driver data to get the buffer size
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• Re: [PATCH 2/3] spi: sun6i: Support Allwinner H3 SPI controller
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• Re: [PATCH 3/3] spi: sun6i: Use the driver data to get the buffer size
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: sun6i: Support Allwinner H3 SPI controller
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 2/3] spi: sun6i: Support Allwinner H3 SPI controller
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] spi: sun6i: Add binding for Allwinner H3 SPI controller
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] spi: imx: support DMA for imx35
  • From: Martin Kaiser <martin@xxxxxxxxx>
• [PATCH] spi: imx: support DMA for imx35
  • From: Martin Kaiser <martin@xxxxxxxxx>
• [PATCH 2/3] spi: sun6i: Support Allwinner H3 SPI controller
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH 3/3] spi: sun6i: Use the driver data to get the buffer size
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH 1/3] spi: sun6i: Add binding for Allwinner H3 SPI controller
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH 0/3] Support H3 SPI controller
  • From: Milo Kim <woogyom.kim@xxxxxxxxx>
• [PATCH 17/28] spi: fsl-espi: avoid processing uninitalized data on error
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] spi: mark device nodes only in case of successful instantiation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] spi: mark device nodes only in case of successful instantiation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] spi: mark device nodes only in case of successful instantiation
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mark device nodes only in case of successful instantiation
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: mark device nodes only in case of successful instantiation
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] spi, i2c: mark device nodes only in case of successful instantiation
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH v2, 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mark device nodes only in case of successful instantiation
  • From: Ralf Ramsauer <ralf@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mark device nodes only in case of successful instantiation
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: mark device nodes only in case of successful instantiation
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] spi, i2c: mark device nodes only in case of successful instantiation
  • From: Ralf Ramsauer <ralf@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] spi: mark device nodes only in case of successful instantiation
  • From: Ralf Ramsauer <ralf@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: mark device nodes only in case of successful instantiation
  • From: Ralf Ramsauer <ralf@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: dspi: clear SPI_SR before enable interrupt
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH v2] spi: spi-fsl-dspi: Add DMA support for Vybrid
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH] spi: mark device nodes only in case of successful instantiation
  • From: Ralf Ramsauer <ralf@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: mark device nodes only in case of successful instantiation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] spi: mark device nodes only in case of successful instantiation
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: mark device nodes only in case of successful instantiation
  • From: Ralf Ramsauer <ralf@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2, 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Kamal Dasu <kamal.dasu@xxxxxxxxxxxx>
• Re: [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer
  • From: Kamal Dasu <kamal.dasu@xxxxxxxxxxxx>
• [PATCH v2 RESEND 2/3] mtd: m25p80: consider max message size in m25p80_read
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: dw: Set GPIO_SS flag to toggle Slave Select on GPIO CS" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add Flag to Enable Slave Select with GPIO Chip Select." to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCHv3 2/2] spi: dw: Set GPIO_SS flag to toggle Slave Select on GPIO CS
  • From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
• [PATCHv3 1/2] spi: Add Flag to Enable Slave Select with GPIO Chip Select.
  • From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v6, 5/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: Applied "spi: imx: wait_for_completion_timeout(..) for PIO transfers" to the spi tree
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCHv2 1/2] Documentation: dt: spi: Add GPIO Slave Select Parameter
  • From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 1/2] Documentation: dt: spi: Add GPIO Slave Select Parameter
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCHv2 1/2] Documentation: dt: spi: Add GPIO Slave Select Parameter
  • From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
• [PATCHv2 2/2] spi: Add Flag to Enable Slave Select with GPIO Chip Select.
  • From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: change post transfer udelay() to usleep_range() for long delays
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH v2 2/2] Doc: update 00-INDEX files to reflect the runnable code move
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] samples: move blackfin gptimers-example from Documentation
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Moving runnable code from Documentation (last 2 patches)
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/11] spi: fsl-espi: remove unneeded check for SPI_QE_CPU_MODE
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: fsl-espi: replace of_get_property with of_property_read_u32" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/1] Add device to spidev device tree compatibility list
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: Add device to spidev device tree compatibility list" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: fix handling of word sizes other than 8 bit" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: reject MSB-first transfers with word sizes other than 8 or 16" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 02/11] spi: fsl-espi: remove unneeded check for SPI_QE_CPU_MODE
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 1/1] Add device to spidev device tree compatibility list
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: dw: Enable Slave Select with GPIO Chip Select.
  • From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: dw: Enable Slave Select with GPIO Chip Select.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] Add devices to spidev device tree compatibility list
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx>
• [PATCH] spi: dw: Enable Slave Select with GPIO Chip Select.
  • From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: intel-ssc: add support for Intel SSC SPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: intel-ssc: add support for Intel SSC SPI controller
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2] spi: spi-fsl-dspi: Add DMA support for Vybrid
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [GIT PULL] spi updates for v4.9
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: omap2-mcspi: Fix modifying platform resource data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid
  • From: maitysanchayan@xxxxxxxxx
• Re: [PATCH] spi: intel-ssc: add support for Intel SSC SPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH v1 2/2] spi: spi-fsl-dspi: Add DMA support for Vybrid
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v1 1/2] ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH] spi: intel-ssc: add support for Intel SSC SPI controller
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 11/11] spi: fsl-espi: add support for dual read mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 10/11] spi: fsl-espi: add support for RXSKIP mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 09/11] spi: fsl-espi: extend and improve transfer error handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 08/11] spi: fsl-espi: make better use of the RX FIFO
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 07/11] spi: fsl-espi: fix and improve reading from RX FIFO
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 06/11] spi: fsl-espi: simplify and inline function fsl_espi_change_mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 05/11] spi: fsl-espi: Rename len in struct mpc8xxx_spi to rx_len and make it unsigned
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 04/11] spi: fsl-espi: fix and improve writing to TX FIFO
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 03/11] spi: fsl-espi: fix handling of word sizes other than 8 bit
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 02/11] spi: fsl-espi: remove unneeded check for SPI_QE_CPU_MODE
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 01/11] spi: fsl-espi: reject MSB-first transfers with word sizes other than 8 or 16
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 00/11] spi: fsl-espi: improvements and additional functionality
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 0/2] Moving runnable code from Documentation (last 2 patches)
  • From: Michal Marek <mmarek@xxxxxxxx>
• [PATCH v2] spi: fsl-espi: replace of_get_property with of_property_read_u32
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 0/2] Moving runnable code from Documentation (last 2 patches)
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH 1/1] Add devices to spidev device tree compatibility list
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Add devices to spidev device tree compatibility list
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: omap2-mcspi: Fix modifying platform resource data
  • From: Vikram N <vicky773@xxxxxxxxx>
• Re: [PATCH 0/2] Moving runnable code from Documentation (last 2 patches)
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 1/1] Add devices to spidev device tree compatibility list
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx>
• Applied "spi: pxa2xx: Fix build error because of missing header" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sc18is602: Change gpiod_set_value to gpiod_set_value_cansleep" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Fix build error because of missing header
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/1] spi: sc18is602: Change gpiod_set_value to gpiod_set_value_cansleep
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Applied "spi: imx: fix error return code in spi_imx_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: pxa2xx: Add support for GPIO descriptor chip selects
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH -next] spi: imx: fix error return code in spi_imx_probe()
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH -next] spi: imx: fix error return code in spi_imx_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH v2] spi: pxa2xx: Add support for GPIO descriptor chip selects
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] spi: fsl-espi: replace of_get_property with of_property_read_u32
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/4] spi: fsl-espi: replace of_get_property with of_property_read_u32
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] spi-fsl-dspi: add slave support
  • From: "Albert ARIBAUD (3ADEV)" <albert.aribaud@xxxxxxxx>
• [PATCH 2/2] Doc: update 00-INDEX files to reflect the runnable code move
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 1/2] samples: move blackfin gptimers-example from Documentation
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 0/2] Moving runnable code from Documentation (last 2 patches)
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Moving runnable code from Documentation (last 2 patches)
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for GPIO descriptor chip selects" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: Gracefully handle NULL master->cs_gpios" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for GPIO descriptor chip selects
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] spi: imx: Gracefully handle NULL master->cs_gpios
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v3 10/15] spi: fsl-espi: improve the ISR frame
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] spi: fsl-espi: simplify of_fsl_espi_probe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: iproc-qspi: Add Broadcom iProc SoCs support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: remove unused variable in fsl_espi_setup" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: simplify of_fsl_espi_probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: improve return value handling in fsl_espi_probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH/RFC v2 1/7] spi: Document DT bindings for SPI controllers in slave mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH/RFC v2 1/7] spi: Document DT bindings for SPI controllers in slave mode
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: atmel: use managed resource for gpio chip select
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: atmel: use managed resource for gpio chip select
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH/RFC v2 1/7] spi: Document DT bindings for SPI controllers in slave mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] spi: dw: use relaxed IO accessor
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] spi: bcm-qspi: fix build error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: dw: use relaxed IO accessor
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH] spi: bcm-qspi: fix build error
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH/RFC v2 3/7] spi: core: Add support for registering SPI slave controllers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 4/4] spi: fsl-espi: replace of_get_property with of_property_read_u32
  • From: Heiner Kallweit <heiner.kallweit@xxxxxx>
• [PATCH 3/4] spi: fsl-espi: improve return value handling in fsl_espi_probe
  • From: Heiner Kallweit <heiner.kallweit@xxxxxx>
• [PATCH 2/4] spi: fsl-espi: simplify of_fsl_espi_probe
  • From: Heiner Kallweit <heiner.kallweit@xxxxxx>
• [PATCH 0/4] spi: fsl-espi: further smaller improvements
  • From: Heiner Kallweit <heiner.kallweit@xxxxxx>
• [PATCH 1/4] spi: fsl-espi: remove unused variable in fsl_espi_setup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 2/3] mtd: m25p80: consider max message size in m25p80_read
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: bcm-qspi: fix suspend/resume #ifdef" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: core: Use spi_sync_transfer() in spi_write()/spi_read()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm-qspi: don't include linux/mtd/cfi.h" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm-qspi: Fix return value check in bcm_qspi_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm-qspi: Fix error return code in bcm_qspi_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: linux-next: Tree for Sep 16 (spi/spi-bcm-qspi.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi-meson: Add GXBB Compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] spi: meson: Add Amlogic GXBB compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH -next] spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH -next] spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH v6, 8/8] spi: iproc-qspi: Add Broadcom iProc SoCs support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] spi: bcm-qspi: fix suspend/resume #ifdef
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] spi: bcm-qspi: don't include linux/mtd/cfi.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v6, 7/8] arm64: dts: Add ns2 SoC support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v6, 6/8] arm: dts: Add bcm-nsp and bcm958625k support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [spi:topic/bcm 2/4] drivers/spi/spi-bcm-qspi.c:703:13: error: 'bcm_qspi_suspend' undeclared here (not in a function)
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Applied "spi: fsl-espi: simplify fsl_espi_setup_transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: improve and simplify interrupt handler" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: align register access with other drivers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: improve and extend register bit definitions" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev_test: Fix buffer overflow in unescape()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: brcmstb-qspi: Broadcom settop platform driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm-qspi: Add BSPI spi-nor flash controller driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: set spi_bus_clk for mx1, mx31 and mx35" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: support loopback mode on imx35" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: imx: set spi_bus_clk for mx1, mx31 and mx35
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 4/4] spi: fsl-espi: improve and extend register bit definitions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/4] spi: fsl-espi: align register access with other drivers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4] spi: fsl-espi: improve and simplify interrupt handler
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4] spi: fsl-espi: simplify fsl_espi_setup_transfer
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] spi: core: Use spi_sync_transfer() in spi_write()/spi_read()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH/RFC v2 4/7] spi: Document SPI slave controller support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC v2 6/7] spi: slave: Add SPI slave handler reporting uptime at previous message
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC v2 3/7] spi: core: Add support for registering SPI slave controllers
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC v2 5/7] spi: sh-msiof: Add slave mode support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC v2 0/7] spi: Add slave mode support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC v2 7/7] spi: slave: Add SPI slave handler controlling system state
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC v2 2/7] spi: core: Extract of_spi_parse_dt()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC v2 1/7] spi: Document DT bindings for SPI controllers in slave mode
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
• [PATCH v2, 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Applied "spi: meson: Add GXBB Compatible string" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: meson: Add GXBB compatible" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: pre-allocate message buffer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: remove element actual_length from struct fsl_espi_trans" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: factor out filling the local buffer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: fix status handling in fsl_espi_do_one_msg" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi-meson: Add GXBB Compatible string
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: remove element status from struct fsl_espi_transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tools: enable CROSS_COMPILE in Makefile" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: eliminate struct fsl_espi_transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: merge fsl_espi_cmd_trans and fsl_espi_rw_trans" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: improve return value handling in fsl_espi_bufs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: merge fsl_espi_bufs and fsl_espi_cpu_bufs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Do not needlessly initialize stack variables" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: round up result of calculation for clock divider" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Default thresholds to PXA configuration" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Remove pointer to current SPI message from driver data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Remove pointer to chip data from driver data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: factor out handling of read data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: factor out initial message checking" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: centralize populating struct spi_transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: improve message length handling" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] tools: spi: enable CROSS_COMPILE in Makefile
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
• Re: [PATCH 14/26] spi: dw-pci: constify local structures
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 00/26] constify local structures
  • From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
• [PATCH 00/26] constify local structures
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 14/26] spi: dw-pci: constify local structures
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 1/1] mtd: devices: m25p80: Add PM suspend resume support
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• [PATCH v2] spi: spidev_test: Fix buffer overflow in unescape()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] spi: spidev_test: Fix buffer overflow in unescape()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] spi: meson: Add Amlogic GXBB compatible
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH 0/2] spi: meson: Add Amlogic GXBB compatible
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• [PATCH] spi: spidev_test: Fix buffer overflow in unescape()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>