The currently in-flight message can be found from the spi master. Use that instead and remove the private data pointer. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> --- drivers/spi/spi-ep93xx.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index f276dde..dd37626 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -74,7 +74,6 @@ * @mmio: pointer to ioremap()'d registers * @sspdr_phys: physical address of the SSPDR register * @wait: wait here until given transfer is completed - * @current_msg: message that is currently processed (or %NULL if none) * @tx: current byte in transfer to transmit * @rx: current byte in transfer to receive * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one @@ -93,7 +92,6 @@ struct ep93xx_spi { void __iomem *mmio; unsigned long sspdr_phys; struct completion wait; - struct spi_message *current_msg; size_t tx; size_t rx; size_t fifo_level; @@ -236,8 +234,7 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t) static int ep93xx_spi_read_write(struct spi_master *master) { struct ep93xx_spi *espi = spi_master_get_devdata(master); - struct spi_message *msg = espi->current_msg; - struct spi_transfer *t = msg->state; + struct spi_transfer *t = master->cur_msg->state; /* read as long as RX FIFO has frames in it */ while ((readl(espi->mmio + SSPSR) & SSPSR_RNE)) { @@ -290,7 +287,7 @@ ep93xx_spi_dma_prepare(struct spi_master *master, enum dma_transfer_direction dir) { struct ep93xx_spi *espi = spi_master_get_devdata(master); - struct spi_transfer *t = espi->current_msg->state; + struct spi_transfer *t = master->cur_msg->state; struct dma_async_tx_descriptor *txd; enum dma_slave_buswidth buswidth; struct dma_slave_config conf; @@ -415,13 +412,12 @@ static void ep93xx_spi_dma_callback(void *callback_param) static void ep93xx_spi_dma_transfer(struct spi_master *master) { struct ep93xx_spi *espi = spi_master_get_devdata(master); - struct spi_message *msg = espi->current_msg; struct dma_async_tx_descriptor *rxd, *txd; rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM); if (IS_ERR(rxd)) { dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); - msg->status = PTR_ERR(rxd); + master->cur_msg->status = PTR_ERR(rxd); return; } @@ -429,7 +425,7 @@ static void ep93xx_spi_dma_transfer(struct spi_master *master) if (IS_ERR(txd)) { ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM); dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd)); - msg->status = PTR_ERR(txd); + master->cur_msg->status = PTR_ERR(txd); return; } @@ -587,9 +583,7 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master, msg->status = 0; msg->actual_length = 0; - espi->current_msg = msg; ep93xx_spi_process_message(master, msg); - espi->current_msg = NULL; spi_finalize_current_message(master); @@ -611,7 +605,7 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) writel(0, espi->mmio + SSPICR); dev_warn(&master->dev, "receive overrun, aborting the message\n"); - espi->current_msg->status = -EIO; + master->cur_msg->status = -EIO; } else { /* * Interrupt is either RX (RIS) or TX (TIS). For both cases we -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html