Let bcm_qspi_bspi_flash_read() return all the requested bytes by breaking up the reads for BSPI block into optimal chunks size that a BSPI block can handle. Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx> --- drivers/spi/spi-bcm-qspi.c | 83 +++++++++++++++++++++++++--------------------- 1 file changed, 46 insertions(+), 37 deletions(-) diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index 14f9dea..5d9d063 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -89,7 +89,7 @@ #define BSPI_BPP_MODE_SELECT_MASK BIT(8) #define BSPI_BPP_ADDR_SELECT_MASK BIT(16) -#define BSPI_READ_LENGTH 256 +#define BSPI_READ_LENGTH 512 /* MSPI register offsets */ #define MSPI_SPCR0_LSB 0x000 @@ -813,7 +813,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, struct spi_flash_read_message *msg) { struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); - u32 addr = 0, len, len_words; + u32 addr = 0, len, rdlen, len_words; int ret = 0; unsigned long timeo = msecs_to_jiffies(100); struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; @@ -826,7 +826,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); /* - * when using flex mode mode we need to send + * when using flex mode we need to send * the upper address byte to bspi */ if (bcm_qspi_bspi_ver_three(qspi) == false) { @@ -840,47 +840,56 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, else addr = msg->from & 0x00ffffff; - /* set BSPI RAF buffer max read length */ - len = msg->len; - if (len > BSPI_READ_LENGTH) - len = BSPI_READ_LENGTH; - if (bcm_qspi_bspi_ver_three(qspi) == true) addr = (addr + 0xc00000) & 0xffffff; - reinit_completion(&qspi->bspi_done); - bcm_qspi_enable_bspi(qspi); - len_words = (len + 3) >> 2; - qspi->bspi_rf_msg = msg; - qspi->bspi_rf_msg_status = 0; + /* + * read into the entire buffer by breaking the reads + * into RAF buffer read lengths + */ + len = msg->len; qspi->bspi_rf_msg_idx = 0; - qspi->bspi_rf_msg_len = len; - dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len); - - bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr); - bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words); - bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0); - if (qspi->soc_intc) { - /* - * clear soc MSPI and BSPI interrupts and enable - * BSPI interrupts. - */ - soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE); - soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true); - } + do { + if (len > BSPI_READ_LENGTH) + rdlen = BSPI_READ_LENGTH; + else + rdlen = len; + + reinit_completion(&qspi->bspi_done); + bcm_qspi_enable_bspi(qspi); + len_words = (rdlen + 3) >> 2; + qspi->bspi_rf_msg = msg; + qspi->bspi_rf_msg_status = 0; + qspi->bspi_rf_msg_len = rdlen; + dev_dbg(&qspi->pdev->dev, + "bspi xfr addr 0x%x len 0x%x", addr, rdlen); + bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr); + bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words); + bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0); + if (qspi->soc_intc) { + /* + * clear soc MSPI and BSPI interrupts and enable + * BSPI interrupts. + */ + soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE); + soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true); + } - /* Must flush previous writes before starting BSPI operation */ - mb(); + /* Must flush previous writes before starting BSPI operation */ + mb(); + bcm_qspi_bspi_lr_start(qspi); + if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) { + dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n"); + ret = -ETIMEDOUT; + break; + } - bcm_qspi_bspi_lr_start(qspi); - if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) { - dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n"); - ret = -ETIMEDOUT; - } else { - /* set the return length for the caller */ - msg->retlen = len; - } + /* set msg return length */ + msg->retlen += rdlen; + addr += rdlen; + len -= rdlen; + } while (len); return ret; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html