Re: [PATCH 2/3] dt-bindings: spi: document bcm63xx HS SPI devicetree bindings

[Florian Fainelli <f.fainelli@xxxxxxxxx>]

On 02/22/2017 05:19 AM, Jonas Gorski wrote:
> Add documentation for the bindings of the high speed SPI controller found
> on newer bcm63xx SoCs.
> 
> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
> ---
>  .../devicetree/bindings/spi/spi-bcm63xx-hsspi.txt  | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
> new file mode 100644
> index 000000000000..3b0a2220b896
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
> @@ -0,0 +1,35 @@
> +Binding for Broadcom BCM6328 SPI controller
> +
> +Required properties:
> +- compatible: must contain of "brcm,bcm6328-hsspi".
> +- reg: Base address and size of the controllers memory area.
> +- interrupts: Interrupt for the SPI block.
> +- clocks: phandle of the SPI clock.
> +- clock-names: must be "hsspi".
> +- #address-cells: <1>, as required by generic SPI binding.
> +- #size-cells: <0>, also as required by generic SPI binding.
> +
> +Optional properties:
> +- num-cs: some controllers have less than 8 cs signals. Defaults to 8
> +  if absent.
> +- clocks: a second handle for the PLL clock.
> +- clock-names: must be named "pll", if present.

I have not found chips where the PLL may be optional, but there may be
ways to have the same PLL and UBUS clocks feeding into the HSSPI block.

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html