Linux Serial
[Prev Page][Next Page]
- Re: [PATCH v2 1/3] dt-bindings: intel,ixp4xx-expansion-bus: split out peripheral properties, (continued)
- [PATCH] dt-bindings: serial: 8250: Fix 'aspeed,lpc-io-reg' differing types,
Rob Herring
- [PATCH v9 0/9] Add minimal MT8365 and MT8365-EVK support,
Bernhard Rosenkränzer
- [PATCH v9 1/9] dt-bindings: arm64: dts: mediatek: Add mt8365-evk board,
Bernhard Rosenkränzer
- [PATCH v9 2/9] dt-bindings: irq: mtk, sysirq: add support for mt8365,
Bernhard Rosenkränzer
- [PATCH v9 3/9] dt-bindings: mfd: syscon: Add mt8365-syscfg,
Bernhard Rosenkränzer
- [PATCH v9 5/9] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings,
Bernhard Rosenkränzer
- [PATCH v9 4/9] dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC,
Bernhard Rosenkränzer
- [PATCH v9 6/9] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings,
Bernhard Rosenkränzer
- [PATCH v9 7/9] dt-bindings: timer: mediatek,mtk-timer: add MT8365,
Bernhard Rosenkränzer
- [PATCH v9 8/9] dt-bindings: serial: mediatek,uart: add MT8365,
Bernhard Rosenkränzer
- [PATCH v9 9/9] arm64: dts: mediatek: Initial mt8365-evk support,
Bernhard Rosenkränzer
- [PATCH V2] Serial: core: Add compat ioctl support,
Viken Dadhaniya
- [PATCH v1 0/3] Add support for NXP bluetooth chipsets,
Neeraj Sanjay Kale
- [PATCH v2 00/12] dt-bindings: serial: cleanup and improvements,
Krzysztof Kozlowski
- [PATCH v2 01/12] dt-bindings: serial: amlogic,meson-uart: allow other serial properties,
Krzysztof Kozlowski
- [PATCH v2 02/12] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible,
Krzysztof Kozlowski
- [PATCH v2 03/12] dt-bindings: serial: pl011: allow ARM Primecell properties,
Krzysztof Kozlowski
- [PATCH v2 06/12] dt-bindings: serial: 8250_omap: drop rs485 properties,
Krzysztof Kozlowski
- [PATCH v2 05/12] dt-bindings: serial: cdsn,uart: add power-domains,
Krzysztof Kozlowski
- [PATCH v2 04/12] dt-bindings: serial: correct ref to serial.yaml,
Krzysztof Kozlowski
- [PATCH v2 07/12] dt-bindings: serial: fsl-imx-uart: drop common properties,
Krzysztof Kozlowski
- [PATCH v2 08/12] dt-bindings: serial: fsl-lpuart: drop rs485 properties,
Krzysztof Kozlowski
- [PATCH v2 10/12] dt-bindings: serial: st,stm32-uart: drop common properties,
Krzysztof Kozlowski
- [PATCH v2 09/12] dt-bindings: serial: fsl-lpuart: allow other serial properties,
Krzysztof Kozlowski
- [PATCH v2 11/12] dt-bindings: serial: drop unneeded quotes,
Krzysztof Kozlowski
- [PATCH v2 12/12] dt-bindings: serial: example cleanup,
Krzysztof Kozlowski
- [tty:tty-testing] BUILD SUCCESS ed0400ad547c0b88d2f06ecf22a089eb2e84c9b7,
kernel test robot
- [PATCH v1 1/1] serial: liteuart: Remove a copy of UART id in private structure,
Andy Shevchenko
- [PATCH v1 1/1] serial: liteuart: Don't mix devm_*() with non-devm_*() calls,
Andy Shevchenko
- [PATCH 0/2] serial: fix recently introduced problems in tty-next,
Ilpo Järvinen
- [PATCH v8 0/9] Add minimal MT8365 and MT8365-EVK support,
Bernhard Rosenkränzer
- [PATCH v8 1/9] dt-bindings: arm64: dts: mediatek: Add mt8365-evk board,
Bernhard Rosenkränzer
- [PATCH v8 2/9] dt-bindings: irq: mtk, sysirq: add support for mt8365,
Bernhard Rosenkränzer
- [PATCH v8 3/9] dt-bindings: mfd: syscon: Add mt8365-syscfg,
Bernhard Rosenkränzer
- [PATCH v8 6/9] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings,
Bernhard Rosenkränzer
- [PATCH v8 4/9] dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC,
Bernhard Rosenkränzer
- [PATCH v8 5/9] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings,
Bernhard Rosenkränzer
- [PATCH v8 7/9] dt-bindings: timer: mediatek,mtk-timer: add MT8365 SoC bindings,
Bernhard Rosenkränzer
- [PATCH v8 8/9] dt-bindings: serial: mediatek,uart: add MT8365 SoC bindings,
Bernhard Rosenkränzer
- [PATCH v8 9/9] arm64: dts: mediatek: Initial mt8365-evk support,
Bernhard Rosenkränzer
- Re: [PATCH v8 0/9] Add minimal MT8365 and MT8365-EVK support,
Kevin Hilman
- [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties,
Krzysztof Kozlowski
- [PATCH 02/13] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible,
Krzysztof Kozlowski
- [PATCH 03/13] dt-bindings: serial: pl011: allow ARM Primecell properties,
Krzysztof Kozlowski
- [PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml,
Krzysztof Kozlowski
- [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains,
Krzysztof Kozlowski
- [PATCH 06/13] dt-bindings: serial: 8250_omap: drop rs485 properties,
Krzysztof Kozlowski
- [PATCH 07/13] dt-bindings: serial: fsl-imx-uart: drop common properties,
Krzysztof Kozlowski
- [PATCH 11/13] dt-bindings: serial: restrict possible child node names,
Krzysztof Kozlowski
- [PATCH 12/13] dt-bindings: serial: drop unneeded quotes,
Krzysztof Kozlowski
- [PATCH 10/13] dt-bindings: serial: st,stm32-uart: drop common properties,
Krzysztof Kozlowski
- [PATCH 09/13] dt-bindings: serial: fsl-lpuart: allow other serial properties,
Krzysztof Kozlowski
- [PATCH 08/13] dt-bindings: serial: fsl-lpuart: drop rs485 properties,
Krzysztof Kozlowski
- [PATCH 13/13] dt-bindings: serial: example cleanup,
Krzysztof Kozlowski
- Re: [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties,
Neil Armstrong
- [tty:tty-next 17/90] drivers/tty/serial/liteuart.c:328 liteuart_probe() warn: missing unwind goto?,
Dan Carpenter
- [PATCH 00/15] Ambarella S6LM SoC bring-up,
Li Chen
- Re: [PATCH 00/15] Ambarella S6LM SoC bring-up,
Arnd Bergmann
- Message not available
- Message not available
[tty:tty-testing] BUILD REGRESSION 7a6aa989f2e844a22cfab5c8ff30e77d17dabb2f,
kernel test robot
[tty:tty-testing 1/1] drivers/tty/serial/qcom_geni_serial.c:1058:12: error: no member named 'rx_fifo' in 'struct qcom_geni_serial_port',
kernel test robot
[PATCH] serial: imx: get rid of registers shadowing,
Sergey Organov
[PATCH v1 0/7] serial: imx: work-around for hardware RX flood, and then isr improvements,
Sergey Organov
[GIT PULL] TTY/Serial driver fixes for 6.2-rc5,
Greg KH
[tty:tty-linus] BUILD SUCCESS 14ee78d5932afeb710c8305196a676a715bfdea8,
kernel test robot
[PATCH v6] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler,
Marek Vasut
[tty:tty-testing] BUILD SUCCESS 05e2600cb0a4d73b0779cf29512819616252aeeb,
kernel test robot
[tty:tty-linus] BUILD REGRESSION 5342ab0af45064cbdc773645b93ab70c24ee161f,
kernel test robot
[PATCH v4] serial: exar: Add support for Sealevel 7xxxC serial cards,
Matthew Howell
[tty:tty-linus 4/7] drivers/tty/serial/stm32-usart.c:804:62: error: 'flags' undeclared,
kernel test robot
[PATCH v3] serial: exar: Add support for Sealevel 7xxxC serial cards,
Matthew Howell
[PATCH v2] serial: exar: Add support for Sealevel 7xxxC serial cards,
Matthew Howell
[PATCH v4 00/12] tty/serial: bool conversions and cleanups,
Ilpo Järvinen
- [PATCH v4 01/12] tty: Cleanup tty_port_set_initialized() bool parameter,
Ilpo Järvinen
- [PATCH v4 02/12] tty: Cleamup tty_port_set_suspended() bool parameter,
Ilpo Järvinen
- [PATCH v4 03/12] tty: Cleanup tty_port_set_active() bool parameter,
Ilpo Järvinen
- [PATCH v4 04/12] tty: moxa: Make local var storing tty_port_initialized() bool,
Ilpo Järvinen
- [PATCH v4 05/12] serial: Convert uart_{,port_}startup() init_hw param to bool,
Ilpo Järvinen
- [PATCH v4 06/12] tty: Convert ->carrier_raised() and callchains to bool,
Ilpo Järvinen
- [PATCH v4 07/12] tty: Convert ->dtr_rts() to take bool argument,
Ilpo Järvinen
- [PATCH v4 09/12] serial: Make uart_handle_cts_change() status param bool active,
Ilpo Järvinen
- [PATCH v4 08/12] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active,
Ilpo Järvinen
- [PATCH v4 10/12] tty: Return bool from tty_termios_hw_change(),
Ilpo Järvinen
- [PATCH v4 11/12] tty: Call ->dtr_rts() parameter active consistently,
Ilpo Järvinen
- [PATCH v4 12/12] tty: moxa: Rename dtr/rts parameters/variables to active,
Ilpo Järvinen
[PATCH] serial: exar: Add support for Sealevel 7xxxC serial cards,
Matthew Howell
[PATCH] serial: samsung: fix buffer size for clk_name,
Alexey V. Vissarionov
[PATCH v5 1/1] serial: core: Start managing serial controllers to enable runtime PM,
Tony Lindgren
[PATCH v11 0/4] Enhance definition of DFH and use enhancements for UART driver,
matthew . gerlach
[PATCH 0/8] serial: imx: work-around for hardware RX flood, and then isr improvements,
Sergey Organov
remove arch/sh,
Christoph Hellwig
- [PATCH 01/22] gpu/drm: remove the shmobile drm driver,
Christoph Hellwig
- [PATCH 02/22] usb: remove the dead USB_OHCI_SH option,
Christoph Hellwig
- [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers,
Christoph Hellwig
- [PATCH 04/22] sound: remove sound/sh,
Christoph Hellwig
- [PATCH 06/22] watchdog: remove the shwdt driver,
Christoph Hellwig
- [PATCH 12/22] net/ethernet/8390: remove stnic,
Christoph Hellwig
- [PATCH 10/22] input: remove sh_keysc,
Christoph Hellwig
- [PATCH 09/22] i2c: remove i2c-sh7760,
Christoph Hellwig
- [PATCH 07/22] cpufreq: remove the sh-cpufreq driver,
Christoph Hellwig
- [PATCH 11/22] mtd/nand: remove sh_flctl,
Christoph Hellwig
- [PATCH 15/22] spi: remove spi-sh,
Christoph Hellwig
- [PATCH 16/22] spi: remove spi-sh-sci,
Christoph Hellwig
- [PATCH 22/22] drivers: platform: remove early_platform_cleanup,
Christoph Hellwig
- [PATCH 21/22] drivers: platform: remove is_sh_early_platform_device,
Christoph Hellwig
- [PATCH 17/22] spi: remove spi-jcore,
Christoph Hellwig
- [PATCH 08/22] dmaengine: remove the shdmac driver,
Christoph Hellwig
- [PATCH 18/22] usb: remove ehci-sh,
Christoph Hellwig
- [PATCH 19/22] fbdev: remove sh7760fb,
Christoph Hellwig
- [PATCH 20/22] media: remove sh_vou,
Christoph Hellwig
- Re: remove arch/sh,
John Paul Adrian Glaubitz
- Message not available
Re: remove arch/sh,
Rob Herring
[PATCH v5] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler,
Marek Vasut
[PATCH v2] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc(),
John Ogness
[PATCH 5.15 08/10] serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way",
Greg Kroah-Hartman
[PATCH 01/11] tty: vt: remove vc_uniscr_debug_check(),
Jiri Slaby (SUSE)
- [PATCH 02/11] tty: vt: drop get_vc_uniscr(),
Jiri Slaby (SUSE)
- [PATCH 03/11] tty: vt: remove reference to undefined NO_VC_UNI_SCREEN,
Jiri Slaby (SUSE)
- [PATCH 04/11] tty: vt: use sizeof(*variable) where possible,
Jiri Slaby (SUSE)
- [PATCH 06/11] tty: vt: remove struct uni_screen,
Jiri Slaby (SUSE)
- [PATCH 05/11] tty: vt: remove char32_t typedef,
Jiri Slaby (SUSE)
- [PATCH 07/11] tty: vt: replace BUG_ON() by WARN_ON_ONCE(),
Jiri Slaby (SUSE)
- [PATCH 08/11] tty: vt: simplify some unicode conditions,
Jiri Slaby (SUSE)
- [PATCH 10/11] tty: vt: saner names for more scroll variables,
Jiri Slaby (SUSE)
- [PATCH 11/11] tty: vt: cache row count in con_scroll(),
Jiri Slaby (SUSE)
- [PATCH 09/11] tty: vt: separate array juggling to juggle_array(),
Jiri Slaby (SUSE)
- Re: [PATCH 01/11] tty: vt: remove vc_uniscr_debug_check(),
Ilpo Järvinen
[PATCH] tty: serial: kgdboc: fix mutex locking order for configure_kgdboc(),
John Ogness
[PATCH v3 00/13] tty/serial: bool conversions and cleanups,
Ilpo Järvinen
- [PATCH v3 01/13] tty: Cleanup tty_port_set_initialized() bool parameter,
Ilpo Järvinen
- [PATCH v3 02/13] tty: Cleamup tty_port_set_suspended() bool parameter,
Ilpo Järvinen
- [PATCH v3 03/13] tty: Cleanup tty_port_set_active() bool parameter,
Ilpo Järvinen
- [PATCH v3 04/13] tty: moxa: Make local var storing tty_port_initialized() bool,
Ilpo Järvinen
- [PATCH v3 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool,
Ilpo Järvinen
- [PATCH v3 10/13] tty: Return bool from tty_termios_hw_change(),
Ilpo Järvinen
- [PATCH v3 12/13] tty: moxa: Rename dtr/rts parameters/variables to active,
Ilpo Järvinen
- [PATCH v3 07/13] tty: Convert ->dtr_rts() to take bool argument,
Ilpo Järvinen
- [PATCH v3 11/13] tty/serial: Call ->dtr_rts() parameter active consistently,
Ilpo Järvinen
- [PATCH v3 08/13] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active,
Ilpo Järvinen
- [PATCH v3 09/13] serial: Make uart_handle_cts_change() status param bool active,
Ilpo Järvinen
- [PATCH v3 13/13] usb/serial: Rename dtr/rts parameters/variables to active,
Ilpo Järvinen
- [PATCH v3 06/13] tty: Convert ->carrier_raised() and callchains to bool,
Ilpo Järvinen
[PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *,
Greg Kroah-Hartman
[PATCH v4] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler,
Marek Vasut
[PATCH v2 00/13] tty/serial: bool conversions and cleanups,
Ilpo Järvinen
- [PATCH v2 06/13] tty: Convert ->carrier_raised() and callchains to bool,
Ilpo Järvinen
- [PATCH v2 03/13] tty: Cleanup tty_port_set_active() bool parameter,
Ilpo Järvinen
- [PATCH v2 05/13] serial: Convert uart_{,port_}startup() init_hw param to bool,
Ilpo Järvinen
- [PATCH v2 04/13] tty: moxa: Make local var storing tty_port_initialized() bool,
Ilpo Järvinen
- [PATCH v2 07/13] tty: Convert ->dtr_rts() to take bool argument,
Ilpo Järvinen
- [PATCH v2 08/13] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active,
Ilpo Järvinen
- [PATCH v2 02/13] tty: Cleamup tty_port_set_suspended() bool parameter,
Ilpo Järvinen
- [PATCH v2 01/13] tty: Cleanup tty_port_set_initialized() bool parameter,
Ilpo Järvinen
- [PATCH v2 09/13] serial: Make uart_handle_cts_change() status param bool active,
Ilpo Järvinen
- [PATCH v2 10/13] tty: Return bool from tty_termios_hw_change(),
Ilpo Järvinen
- [PATCH v2 11/13] tty/serial: Call ->dtr_rts() parameter active consistently,
Ilpo Järvinen
- [PATCH v2 13/13] usb/serial: Rename dtr/rts parameters/variables to active,
Ilpo Järvinen
- [PATCH v2 12/13] tty: moxa: Rename dtr/rts parameters/variables to active,
Ilpo Järvinen
[PATCH v10 0/4] Enhance definition of DFH and use enhancements for UART driver,
matthew . gerlach
[PATCH] serial: msm: add lock annotation to msm_set_baud_rate(),
Krzysztof Kozlowski
[PATCH v2] serial: atmel: fix incorrect baudrate setup,
Tobias Schramm
[PATCH] serial: atmel: fix incorrect baudrate setup,
Tobias Schramm
[PATCH] serial: amba-pl011: fix high priority character transmission in rs486 mode,
Lino Sanfilippo
[PATCH v6] serial: linflexuart: Remove redundant uart type assignment,
李哲
Re: [PATCH v6] serial: linflexuart: Remove redundant uart type assignment,
Greg KH
[PATCH v2 0/3] serial: Separate RT288x/Au1xxx code into own file,
Ilpo Järvinen
Re: [niks:has_ioport_v3] [tty] aa0652d7f1: BUG:kernel_NULL_pointer_dereference,address,
Arnd Bergmann
Re: [PATCH v5] serial: linflexuart: remove redundant uart type assignment,
Jiri Slaby
[PATCH v9 0/4] Enhance definition of DFH and use enhancements for UART driver,
matthew . gerlach
[PATCH v4] serial: linflexuart: remove redundant uart type assignment,
lizhe
[PATCH 00/10] tty/serial: bool conversions and cleanups,
Ilpo Järvinen
- [PATCH 04/10] tty: moxa: Make local var storing tty_port_initialized() bool,
Ilpo Järvinen
- [PATCH 05/10] serial: Convert uart_{,port_}startup() init_hw param to bool,
Ilpo Järvinen
- [PATCH 03/10] tty: Cleanup tty_port_set_active() bool parameter,
Ilpo Järvinen
- [PATCH 02/10] tty: Cleamup tty_port_set_suspended() bool parameter,
Ilpo Järvinen
- [PATCH 01/10] tty: Cleanup tty_port_set_initialized() bool parameter,
Ilpo Järvinen
- [PATCH 07/10] tty: Convert ->dtr_rts() to take bool argument,
Ilpo Järvinen
- [PATCH 08/10] tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool,
Ilpo Järvinen
- [PATCH 10/10] tty: Return bool from tty_termios_hw_change(),
Ilpo Järvinen
- [PATCH 09/10] serial: Make uart_handle_cts_change() status param bool,
Ilpo Järvinen
- [PATCH 06/10] tty: Convert ->carrier_raised() and callchains to bool,
Ilpo Järvinen
[PATCH v3] serial: linflexuart: remove redundant uart type PORT_LINFLEXUART,
lizhe
[PATCH v2] serial: linflexuart: remove redundant uart type _assignment_,
lizhe
[PATCH v1] drivers/fsl_linflexuart.c : remove redundant uart type,
lizhe
[PATCH 1/1] serial: pch_uart: Pass correct sg to dma_unmap_sg(),
Ilpo Järvinen
[PATCH] serial: sccnxp: Use devm_clk_get_enabled() helper,
Christophe JAILLET
[PATCH 0/3] serial: Separate RT288x/Au1xxx code into own file,
Ilpo Järvinen
[RESEND PATCH 0/2] tty: serial: add and use a managed variant of uart_add_one_port(),
Bartosz Golaszewski
[PATCH v6 00/14] serial: qcom-geni-serial: implement support for SE DMA,
Bartosz Golaszewski
- [PATCH v6 01/14] tty: serial: qcom-geni-serial: stop operations in progress at shutdown,
Bartosz Golaszewski
- [PATCH v6 03/14] tty: serial: qcom-geni-serial: remove unused symbols,
Bartosz Golaszewski
- [PATCH v6 12/14] tty: serial: qcom-geni-serial: use of_device_id data,
Bartosz Golaszewski
- [PATCH v6 06/14] tty: serial: qcom-geni-serial: remove stray newlines,
Bartosz Golaszewski
- [PATCH v6 11/14] tty: serial: qcom-geni-serial: drop the return value from handle_rx,
Bartosz Golaszewski
- [PATCH v6 07/14] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr(),
Bartosz Golaszewski
- [PATCH v6 10/14] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo(),
Bartosz Golaszewski
- [PATCH v6 13/14] soc: qcom-geni-se: add more symbol definitions,
Bartosz Golaszewski
- [PATCH v6 08/14] tty: serial: qcom-geni-serial: remove unneeded tabs,
Bartosz Golaszewski
- [PATCH v6 14/14] tty: serial: qcom-geni-serial: add support for serial engine DMA,
Bartosz Golaszewski
- [PATCH v6 04/14] tty: serial: qcom-geni-serial: align #define values,
Bartosz Golaszewski
- [PATCH v6 05/14] tty: serial: qcom-geni-serial: improve the to_dev_port() macro,
Bartosz Golaszewski
- [PATCH v6 02/14] tty: serial: qcom-geni-serial: drop unneeded forward definitions,
Bartosz Golaszewski
- [PATCH v6 09/14] tty: serial: qcom-geni-serial: split out the FIFO tx code,
Bartosz Golaszewski
- Re: [PATCH v6 00/14] serial: qcom-geni-serial: implement support for SE DMA,
Bartosz Golaszewski
[PATCH v8 0/4] Enhance definition of DFH and use enhancements for UART driver,
matthew . gerlach
[PATCH tty-next v2 0/3] hid-ft260 cleanups,
Christina Quast
serial: imx: doubtful code?,
Sergey Organov
[PATCH v2] tty: serial: zs: convert atomic_* to refcount_* APIs for irq_guard,
Deepak R Varma
[PATCH v3 0/2] tty: serial: dz: convert atomic_* to refcount_*,
Deepak R Varma
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]
