[PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



UART_FCR shares the same offset with UART_IIR. We cannot use
UART_FCR in serial8250_em_serial_in() as it overlaps with
UART_IIR.

This patch introduces a macro UART_FCR_EM with a high value to
avoid overlapping with existing UART_* register defines.

This will help us to use UART_FCR_EM consistently in serial8250_em_
serial{_in/_out} function to read/write FCR register.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
v4:
 * New patch. Used UART_FCR_EM for read/write of FCR register.
---
 drivers/tty/serial/8250/8250_em.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 499d7a8847ec..4165fd3bb17a 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -19,6 +19,13 @@
 #define UART_DLL_EM 9
 #define UART_DLM_EM 10
 
+/*
+ * A high value for UART_FCR_EM avoids overlapping with existing UART_*
+ * register defines. UART_FCR_EM_HW is the real HW register offset.
+ */
+#define UART_FCR_EM 0x10003
+#define UART_FCR_EM_HW 3
+
 struct serial8250_em_priv {
 	int line;
 };
@@ -29,12 +36,14 @@ static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
 	case UART_TX: /* TX @ 0x00 */
 		writeb(value, p->membase);
 		break;
-	case UART_FCR: /* FCR @ 0x0c (+1) */
 	case UART_LCR: /* LCR @ 0x10 (+1) */
 	case UART_MCR: /* MCR @ 0x14 (+1) */
 	case UART_SCR: /* SCR @ 0x20 (+1) */
 		writel(value, p->membase + ((offset + 1) << 2));
 		break;
+	case UART_FCR_EM:
+		writel(value, p->membase + (UART_FCR_EM_HW << 2));
+		break;
 	case UART_IER: /* IER @ 0x04 */
 		value &= 0x0f; /* only 4 valid bits - not Xscale */
 		fallthrough;
@@ -54,6 +63,8 @@ static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset)
 	case UART_MSR: /* MSR @ 0x1c (+1) */
 	case UART_SCR: /* SCR @ 0x20 (+1) */
 		return readl(p->membase + ((offset + 1) << 2));
+	case UART_FCR_EM:
+		return readl(p->membase + (UART_FCR_EM_HW << 2));
 	case UART_IER: /* IER @ 0x04 */
 	case UART_IIR: /* IIR @ 0x08 */
 	case UART_DLL_EM: /* DLL @ 0x24 (+9) */
-- 
2.25.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux