Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

On 2023-02-13 10:06:04 +0000, Biju Das wrote:
> Hi Niklas,
> 
> Thanks for testing.
> 
> > -----Original Message-----
> > From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
> > Sent: Monday, February 13, 2023 9:58 AM
> > To: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Cc: Jiri Slaby <jirislaby@xxxxxxxxxx>; Ilpo Järvinen
> > <ilpo.jarvinen@xxxxxxxxxxxxxxx>; Geert Uytterhoeven
> > <geert+renesas@xxxxxxxxx>; Magnus Damm <magnus.damm@xxxxxxxxx>; Greg Kroah-
> > Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; linux-serial <linux-
> > serial@xxxxxxxxxxxxxxx>; Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>;
> > linux-renesas-soc@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct
> > serial8250_em_hw_info
> > 
> > Hi Biju,
> > 
> > On 2023-02-13 09:31:27 +0000, Biju Das wrote:
> > > Adding Magnus and Niklas to test on EMMA mobile platform to check the
> > > port type detected On that platform?
> > 
> > I don't know what you want me to check, I don't know much about serial. I
> > wired up the platform during the weekend, here is a boot log running on
> > v6.1. If you want to to check / test something I'm happy to, but will need
> > instructions.
> 
> As per Geert the register layout is same as RZ/V2M,
> So The UART is register compatible with standard 16750 chip.
> 
> But below log shows that it is 16550A and using only 16-bytes fifo,
> Eventhough it has 64-bytes fifo.
> 
> [    1.020000] e1020000.serial: ttyS0 at MMIO 0xe1020000 (irq = 37, base_baud = 796444) is a 16550A
> [    1.020000] e1030000.serial: ttyS1 at MMIO 0xe1030000 (irq = 38, base_baud = 7168000) is a 16550A
> [    1.690000] printk: console [ttyS1] enabled
> [    1.700000] e1040000.serial: ttyS2 at MMIO 0xe1040000 (irq = 39, base_baud = 14336000) is a 16550A
> [    1.710000] e1050000.serial: ttyS3 at MMIO 0xe1050000 (irq = 40, base_baud = 2389333) is a 16550A
> 
> So if you apply, this patch series, and add below changes it should detect as 16750
> 
> https://lore.kernel.org/linux-renesas-soc/8585f736-cf3b-b63c-753f-892d4051ada3@xxxxxxxxxxxxxxx/T/#mce8d222e3670321e8a8e39faacc4d6dd061fdbd6
> 
> and for quick testing please do below change for emma mobile.
> 
> + { .compatible = "renesas,em-uart", .data = &rzv2m_uart_hw_info },


Could you provide a branch with the setup you like me to test?

> 
> Cheers,
> Biju
> 
> 
> 
> > 
> > [    0.000000] Booting Linux on physical CPU 0x0
> > [    0.000000] Linux version 6.1.0 (neg@sleipner) (arm-linux-gnueabihf-gcc
> > (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP Sun Feb 12 18:44:55 CET
> > 2023
> > [    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7),
> > cr=10c5387d
> > [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> > instruction cache
> > [    0.000000] OF: fdt: Machine model: EMEV2 KZM9D Board
> > [    0.000000] printk: debug: ignoring loglevel setting.
> > [    0.000000] Memory policy: Data cache writealloc
> > [    0.000000] cma: Failed to reserve 128 MiB
> > [    0.000000] Zone ranges:
> > [    0.000000]   Normal   [mem 0x0000000040000000-0x0000000047ffffff]
> > [    0.000000]   HighMem  empty
> > [    0.000000] Movable zone start for each node
> > [    0.000000] Early memory node ranges
> > [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000047ffffff]
> > [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-
> > 0x0000000047ffffff]
> > [    0.000000] percpu: Embedded 13 pages/cpu s32468 r0 d20780 u53248
> > [    0.000000] pcpu-alloc: s32468 r0 d20780 u53248 alloc=13*4096
> > [    0.000000] pcpu-alloc: [0] 0 [0] 1
> > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
> > [    0.000000] Kernel command line: ignore_loglevel rw root=/dev/nfs ip=on
> > [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
> > bytes, linear)
> > [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes,
> > linear)
> > [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > [    0.000000] Memory: 116072K/131072K available (8192K kernel code, 1152K
> > rwdata, 2436K rodata, 1024K init, 259K bss, 15000K reserved, 0K cma-
> > reserved, 0K highmem)
> > [    0.000000] trace event string verifier disabled
> > [    0.000000] rcu: Hierarchical RCU implementation.
> > [    0.000000] rcu: 	RCU event tracing is enabled.
> > [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to
> > nr_cpu_ids=2.
> > [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10
> > jiffies.
> > [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> > [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > [    0.000000] GIC: enabling workaround for broken byte access
> > [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on
> > contention.
> > [    0.000000] timer_probe: no matching timers found
> > [    0.000000] Console: colour dummy device 80x30
> > [    0.000000] printk: console [tty0] enabled
> > [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps
> > every 21474836475000000ns
> > [    0.000000] Calibrating delay loop (skipped) preset value.. 1066.00
> > BogoMIPS (lpj=5330000)
> > [    0.000000] pid_max: default: 32768 minimum: 301
> > [    0.000000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes,
> > linear)
> > [    0.000000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
> > bytes, linear)
> > [    0.000000] CPU: Testing write buffer coherency: ok
> > [    0.000000] CPU0: Spectre v2: using BPIALL workaround
> > [    0.000000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > [    0.000000] Setting up static identity map for 0x40100000 - 0x40100060
> > [    0.000000] rcu: Hierarchical SRCU implementation.
> > [    0.000000] rcu: 	Max phase no-delay instances is 1000.
> > [    0.000000] smp: Bringing up secondary CPUs ...
> > [    0.000000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> > [    0.000000] CPU1: Spectre v2: using BPIALL workaround
> > [    0.000000] smp: Brought up 1 node, 2 CPUs
> > [    0.000000] SMP: Total of 2 processors activated (2132.00 BogoMIPS).
> > [    0.000000] CPU: All CPU(s) started in SVC mode.
> > [    0.000000] devtmpfs: initialized
> > [    0.000000] VFP support v0.3: implementor 41 architecture 3 part 30
> > variant 9 rev 1
> > [    0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles:
> > 0xffffffff, max_idle_ns: 19112604462750000 ns
> > [    0.000000] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
> > [    0.000000] pinctrl core: initialized pinctrl subsystem
> > [    0.000000] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> > [    0.000000] DMA: preallocated 256 KiB pool for atomic coherent
> > allocations
> > [    0.000000] thermal_sys: Registered thermal governor 'step_wise'
> > [    0.000000] No ATAGs?
> > [    0.000000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
> > watchpoint registers.
> > [    0.000000] hw-breakpoint: maximum watchpoint size is 4 bytes.
> > [    0.000000] sh-pfc e0140200.pinctrl: emev2_pfc support registered
> > [    0.000000] SCSI subsystem initialized
> > [    0.000000] libata version 3.00 loaded.
> > [    0.000000] usbcore: registered new interface driver usbfs
> > [    0.000000] usbcore: registered new interface driver hub
> > [    0.000000] usbcore: registered new device driver usb
> > [    0.000000] mc: Linux media interface: v0.10
> > [    0.000000] videodev: Linux video capture interface: v2.00
> > [    0.000000] pps_core: LinuxPPS API ver. 1 registered
> > [    0.000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> > Giometti <giometti@xxxxxxxx>
> > [    0.000000] PTP clock support registered
> > [    0.000000] em_sti e0180000.timer: used for clock events
> > [    0.000000] em_sti e0180000.timer: used for oneshot clock events
> > [    0.000000] em_sti e0180000.timer: used as clock source
> > [    0.000000] clocksource: e0180000.timer: mask: 0xffffffffffff max_cycles:
> > 0x1ef4687b1, max_idle_ns: 112843571739654 ns
> > [    0.000000] Advanced Linux Sound Architecture Driver Initialized.
> > [    0.000000] vgaarb: loaded
> > [    0.940000] clocksource: Switched to clocksource e0180000.timer
> > [    0.950000] Clockevents: could not switch to one-shot mode:
> > [    0.950000] Clockevents: could not switch to one-shot mode: dummy_timer
> > is not functional.
> > [    0.950000]  dummy_timer is not functional.
> > [    0.960000] NET: Registered PF_INET protocol family
> > [    0.960000] IP idents hash table entries: 2048 (order: 2, 16384 bytes,
> > linear)
> > [    0.960000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0,
> > 4096 bytes, linear)
> > [    0.960000] Table-perturb hash table entries: 65536 (order: 6, 262144
> > bytes, linear)
> > [    0.960000] TCP established hash table entries: 1024 (order: 0, 4096
> > bytes, linear)
> > [    0.960000] TCP bind hash table entries: 1024 (order: 2, 16384 bytes,
> > linear)
> > [    0.960000] TCP: Hash tables configured (established 1024 bind 1024)
> > [    0.960000] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
> > [    0.960000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes,
> > linear)
> > [    0.960000] NET: Registered PF_UNIX/PF_LOCAL protocol family
> > [    0.960000] RPC: Registered named UNIX socket transport module.
> > [    0.960000] RPC: Registered udp transport module.
> > [    0.960000] RPC: Registered tcp transport module.
> > [    0.960000] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > [    0.960000] PCI: CLS 0 bytes, default 64
> > [    1.000000] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7
> > counters available
> > [    1.000000] workingset: timestamp_bits=30 max_order=15 bucket_order=0
> > [    1.000000] NFS: Registering the id_resolver key type
> > [    1.000000] Key type id_resolver registered
> > [    1.000000] Key type id_legacy registered
> > [    1.000000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
> > [    1.000000] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
> > Registering...
> > [    1.000000] Block layer SCSI generic (bsg) driver version 0.4 loaded
> > (major 246)
> > [    1.000000] io scheduler mq-deadline registered
> > [    1.000000] io scheduler kyber registered
> > [    1.010000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> > [    1.020000] e1020000.serial: ttyS0 at MMIO 0xe1020000 (irq = 37,
> > base_baud = 796444) is a 16550A
> > [    1.020000] e1030000.serial: ttyS1 at MMIO 0xe1030000 (irq = 38,
> > base_baud = 7168000) is a 16550A
> > [    1.690000] printk: console [ttyS1] enabled
> > [    1.700000] e1040000.serial: ttyS2 at MMIO 0xe1040000 (irq = 39,
> > base_baud = 14336000) is a 16550A
> > [    1.710000] e1050000.serial: ttyS3 at MMIO 0xe1050000 (irq = 40,
> > base_baud = 2389333) is a 16550A
> > [    1.720000] SuperH (H)SCI(F) driver initialized
> > [    1.730000] CAN device driver interface
> > [    1.800000] smsc911x 20000000.ethernet eth0: MAC Address:
> > 00:0a:a3:02:12:92
> > [    1.810000] UDC core: g_ether: couldn't find an available UDC
> > [    1.810000] i2c_dev: i2c /dev entries driver
> > [    1.820000] em-i2c e0070000.i2c: Added i2c controller 0, irq 42
> > [    1.830000] em-i2c e10a0000.i2c: Added i2c controller 1, irq 43
> > [    1.830000] cpu cpu0: OPP table can't be empty
> > [    1.840000] usbcore: registered new interface driver usbhid
> > [    1.850000] usbhid: USB HID core driver
> > [    1.850000] NET: Registered PF_INET6 protocol family
> > [    1.860000] Segment Routing with IPv6
> > [    1.870000] In-situ OAM (IOAM) with IPv6
> > [    1.870000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > [    1.880000] NET: Registered PF_PACKET protocol family
> > [    1.880000] can: controller area network core
> > [    1.890000] NET: Registered PF_CAN protocol family
> > [    1.890000] can: raw protocol
> > [    1.900000] can: broadcast manager protocol
> > [    1.900000] can: netlink gateway - max_hops=1
> > [    1.900000] Key type dns_resolver registered
> > [    1.910000] Registering SWP/SWPB emulation handler
> > [    1.920000] input: gpio_keys as /devices/platform/gpio_keys/input/input0
> > [    1.980000] SMSC LAN8700 20000000.ethernet-ffffffff:01: attached PHY
> > driver (mii_bus:phy_addr=20000000.ethernet-ffffffff:01, irq=POLL)
> > [    2.020000] smsc911x 20000000.ethernet eth0: SMSC911x/921x identified at
> > 0xc8920000, IRQ: 41
> > [    4.160000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > [    4.210000] Sending DHCP requests ., OK
> > [    4.250000] IP-Config: Got DHCP answer from 10.0.1.1, my address is
> > 10.0.1.2
> > [    4.260000] IP-Config: Complete:
> > [    4.260000]      device=eth0, hwaddr=00:0a:a3:02:12:92, ipaddr=10.0.1.2,
> > mask=255.255.255.0, gw=10.0.1.1
> > [    4.270000]      host=10.0.1.2, domain=dyn.berto.se, nis-domain=(none)
> > [    4.280000]      bootserver=10.0.1.1, rootserver=10.0.1.1,
> > rootpath=/srv/nfs4/arch,tcp,v3
> > [    4.280000]      nameserver0=192.168.20.1
> > [    4.290000] ALSA device list:
> > [    4.290000]   No soundcards found.
> > [    4.320000] VFS: Mounted root (nfs filesystem) on device 0:15.
> > [    4.320000] devtmpfs: mounted
> > [    4.330000] Freeing unused kernel image (initmem) memory: 1024K
> > [    4.390000] Run /sbin/init as init process
> > [    4.390000]   with arguments:
> > [    4.390000]     /sbin/init
> > [    4.400000]   with environment:
> > [    4.400000]     HOME=/
> > [    4.400000]     TERM=linux
> > [    6.040000] systemd[1]: System time before build time, advancing clock.
> > [    6.100000] systemd[1]: Failed to find module 'autofs4'
> > [    6.220000] systemd[1]: systemd 252.5-1-arch running in system mode (+PAM
> > +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL
> > +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP
> > +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB
> > +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
> > [    6.240000] systemd[1]: Detected architecture arm.
> > [    6.290000] systemd[1]: Hostname set to <arm>.
> > [    6.520000] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel,
> > BPF LSM not supported
> > [    8.710000] systemd[1]: Queued start job for default target Graphical
> > Interface.
> > [    8.730000] systemd[1]: Created slice Slice /system/getty.
> > [    8.770000] systemd[1]: Created slice Slice /system/modprobe.
> > [    8.810000] systemd[1]: Created slice Slice /system/serial-getty.
> > [    8.850000] systemd[1]: Created slice User and Session Slice.
> > [    8.890000] systemd[1]: Started Dispatch Password Requests to Console
> > Directory Watch.
> > [    8.930000] systemd[1]: Started Forward Password Requests to Wall
> > Directory Watch.
> > [    8.970000] systemd[1]: Arbitrary Executable File Formats File System
> > Automount Point was skipped because of an unmet condition check
> > (ConditionPathExists=/proc/sys/fs/binfmt_misc).
> > [    8.980000] systemd[1]: Reached target Local Encrypted Volumes.
> > [    9.020000] systemd[1]: Reached target Local Integrity Protected Volumes.
> > [    9.060000] systemd[1]: Reached target Network is Online.
> > [    9.100000] systemd[1]: Reached target Path Units.
> > [    9.130000] systemd[1]: Reached target Slice Units.
> > [    9.170000] systemd[1]: Reached target Swaps.
> > [    9.200000] systemd[1]: Reached target Local Verity Protected Volumes.
> > [    9.240000] systemd[1]: Listening on Device-mapper event daemon FIFOs.
> > [    9.300000] systemd[1]: Listening on Process Core Dump Socket.
> > [    9.340000] systemd[1]: Journal Audit Socket was skipped because of an
> > unmet condition check (ConditionSecurity=audit).
> > [    9.350000] systemd[1]: Listening on Journal Socket (/dev/log).
> > [    9.390000] systemd[1]: Listening on Journal Socket.
> > [    9.430000] systemd[1]: Listening on udev Control Socket.
> > [    9.470000] systemd[1]: Listening on udev Kernel Socket.
> > [    9.510000] systemd[1]: Huge Pages File System was skipped because of an
> > unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
> > [    9.520000] systemd[1]: POSIX Message Queue File System was skipped
> > because of an unmet condition check
> > (ConditionPathExists=/proc/sys/fs/mqueue).
> > [    9.590000] systemd[1]: Mounting /root/shared...
> > [    9.620000] systemd[1]: Mounting Kernel Debug File System...
> > [    9.680000] systemd[1]: Mounting Kernel Trace File System...
> > [    9.780000] systemd[1]: Mounting Temporary Directory /tmp...
> > [    9.820000] systemd[1]: Create List of Static Device Nodes was skipped
> > because of an unmet condition check
> > (ConditionFileNotEmpty=/lib/modules/6.1.0/modules.devname).
> > [    9.850000] systemd[1]: Starting Load Kernel Module configfs...
> > [    9.960000] systemd[1]: Starting Load Kernel Module drm...
> > [   10.010000] systemd[1]: Starting Load Kernel Module fuse...
> > [   10.070000] systemd[1]: Load Kernel Modules was skipped because no
> > trigger condition checks were met.
> > [   10.120000] systemd[1]: Starting Remount Root and Kernel File Systems...
> > [   10.190000] systemd[1]: Repartition Root Disk was skipped because no
> > trigger condition checks were met.
> > [   10.250000] systemd[1]: Starting Apply Kernel Variables...
> > [   10.310000] systemd[1]: Starting Coldplug All udev Devices...
> > [   10.390000] systemd[1]: Mounted Kernel Debug File System.
> > [   10.410000] systemd[1]: Mounted Kernel Trace File System.
> > [   10.450000] systemd[1]: Mounted Temporary Directory /tmp.
> > [   10.490000] systemd[1]: modprobe@configfs.service: Deactivated
> > successfully.
> > [   10.520000] systemd[1]: Finished Load Kernel Module configfs.
> > [   10.550000] systemd[1]: modprobe@drm.service: Deactivated successfully.
> > [   10.550000] systemd[1]: Finished Load Kernel Module drm.
> > [   10.600000] systemd[1]: modprobe@fuse.service: Deactivated successfully.
> > [   10.610000] systemd[1]: Finished Load Kernel Module fuse.
> > [   10.650000] systemd[1]: Finished Remount Root and Kernel File Systems.
> > [   10.670000] systemd[1]: Finished Apply Kernel Variables.
> > [   10.890000] systemd[1]: Reached target Host and Network Name Lookups.
> > [   10.940000] systemd[1]: Listening on RPCbind Server Activation Socket.
> > [   10.990000] systemd[1]: Reached target RPC Port Mapper.
> > [   11.030000] systemd[1]: FUSE Control File System was skipped because of
> > an unmet condition check (ConditionPathExists=/sys/fs/fuse/connections).
> > [   11.090000] systemd[1]: Mounting Kernel Configuration File System...
> > [   11.130000] systemd[1]: Starting NFS status monitor for NFSv2/3
> > locking....
> > [   11.180000] systemd[1]: First Boot Wizard was skipped because of an unmet
> > condition check (ConditionFirstBoot=yes).
> > [   11.210000] systemd[1]: Rebuild Hardware Database was skipped because of
> > an unmet condition check (ConditionNeedsUpdate=/etc).
> > [   11.290000] systemd[1]: Starting Load/Save Random Seed...
> > [   11.330000] systemd[1]: Create System Users was skipped because no
> > trigger condition checks were met.
> > [   11.380000] systemd[1]: Starting Create Static Device Nodes in /dev...
> > [   11.500000] systemd[1]: Finished Coldplug All udev Devices.
> > [   11.540000] systemd[1]: Mounted Kernel Configuration File System.
> > [   11.620000] systemd[1]: Starting RPC Bind...
> > [   12.160000] systemd[1]: Finished Create Static Device Nodes in /dev.
> > [   12.200000] systemd[1]: Started RPC Bind.
> > [   12.240000] systemd[1]: Reached target Preparation for Local File
> > Systems.
> > [   12.290000] systemd[1]: Virtual Machine and Container Storage
> > (Compatibility) was skipped because of an unmet condition check
> > (ConditionPathExists=/var/lib/machines.raw).
> > [   12.310000] systemd[1]: Reached target Local File Systems.
> > [   12.350000] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was
> > skipped because of an unmet condition check (ConditionKernelVersion=<5.6).
> > [   12.360000] systemd[1]: Rebuild Dynamic Linker Cache was skipped because
> > no trigger condition checks were met.
> > [   12.420000] systemd[1]: Starting Notify NFS peers of a restart...
> > [   12.460000] systemd[1]: Set Up Additional Binary Formats was skipped
> > because no trigger condition checks were met.
> > [   12.480000] systemd[1]: systemd-journald.service: unit configures an IP
> > firewall, but the local system does not support BPF/cgroup firewalling.
> > [   12.490000] systemd[1]: (This warning is only shown for the first unit
> > using IP firewalling.)
> > [   12.570000] systemd[1]: Starting Journal Service...
> > [   12.620000] systemd[1]: Starting Rule-based Manager for Device Events and
> > Files...
> > [   12.700000] systemd[1]: Started NFS status monitor for NFSv2/3 locking..
> > [   12.740000] systemd[1]: Started Notify NFS peers of a restart.
> > [   12.990000] systemd[1]: Started Journal Service.
> > [   16.860000] systemd-journald[87]: Received client request to flush
> > runtime journal.
> > [   21.360000] random: dbus-daemon: uninitialized urandom read (12 bytes
> > read)
> > [   22.190000] random: dbus-daemon: uninitialized urandom read (12 bytes
> > read)
> > [   39.150000] random: crng init done
> > 
> > --
> > Kind Regards,
> > Niklas Söderlund

-- 
Kind Regards,
Niklas Söderlund



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux