Linux Real Time Users

• Thread Index

• Re: [PATCH] arm64: reenable interrupt when handling ptrace breakpoint
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [PATCH] arm64: reenable interrupt when handling ptrace breakpoint
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH] arm64: reenable interrupt when handling ptrace breakpoint
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [4.1.7-rt8][report] Very high cyclictest latency during glmark2 on i915 gpu
  • From: Christoph Mathys <eraserix@xxxxxxxxx>
• Re: [PATCH RFC] rdtscbench: a nohz_full validation and benchmarking tool
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH] arm64: reenable interrupt when handling ptrace breakpoint
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: Hung task for proc_cgroup_show
  • From: Christoph Mathys <eraserix@xxxxxxxxx>
• Re: Hung task for proc_cgroup_show
  • From: Christoph Mathys <eraserix@xxxxxxxxx>
• Re: [PATCH RFC] rdtscbench: a nohz_full validation and benchmarking tool
  • From: Clark Williams <williams@xxxxxxxxxx>
• Re: [PATCH] arm64: reenable interrupt when handling ptrace breakpoint
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• [PATCH] rtmutex: Use chainwalking control enum
  • From: bmouring@xxxxxx
• [PATCH v2] rt: x86: enable preemption in IST exception for x86-32
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: ARMv7 futex latency spike
  • From: Ioan-Adrian Ratiu <adrian.ratiu@xxxxxx>
• Re: [PATCH] make HWLAT_DETECTOR kernel config either disabled or a module, never builtin.
  • From: Joakim Hernberg <jhernberg@xxxxxxxxxx>
• Re: PREEMPT_RT with Full Tickless
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: PREEMPT_RT with Full Tickless
  • From: Gary Robertson <gary.robertson@xxxxxxxxxx>
• Re: [PATCH] rt: x86: extend signal send delay to 32 bit
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [4.1.3-rt3] [report][suspend to ram] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH RFC] rdtscbench: a nohz_full validation and benchmarking tool
  • From: Clark Williams <williams@xxxxxxxxxx>
• Re: [PATCH] make HWLAT_DETECTOR kernel config either disabled or a module, never builtin.
  • From: Joakim Hernberg <jhernberg@xxxxxxxxxx>
• Re: [PATCH] rt: x86: extend signal send delay to 32 bit
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [PATCH] rt: x86: extend signal send delay to 32 bit
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: -rt kernel just can show 8 perf events?
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: PREEMPT_RT with Full Tickless
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: RT patch for 4.2 - expected date
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: -rt kernel just can show 8 perf events?
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Triggering BUG on SIGSEGV signaling
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: BUG: scheduling while atomic: swapper/0/0/0x00010002
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Philipp Schrader <philipp@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] make HWLAT_DETECTOR kernel config either disabled or a module, never builtin.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Philipp Schrader <philipp@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC] rdtscbench: a nohz_full validation and benchmarking tool
  • From: Clark Williams <williams@xxxxxxxxxx>
• Re: ARMv7 futex latency spike
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH RFC] rdtscbench: a nohz_full validation and benchmarking tool
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: problems with chained IRQ handlers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [4.1.3-rt3] [report][suspend to ram] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Hung task for proc_cgroup_show
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: PREEMPT_RT with Full Tickless
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• PREEMPT_RT with Full Tickless
  • From: GeHao Kang <kanghao0928@xxxxxxxxx>
• [PATCH] rt: x86: extend signal send delay to 32 bit
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• RT patch for 4.2 - expected date
  • From: Kevin Wilson <wkevils@xxxxxxxxx>
• Re: [kbuild-all] [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Fengguang Wu <lkp@xxxxxxxxx>
• -rt kernel just can show 8 perf events?
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: RCU stall and the system boot hang
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [kbuild-all] [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH tip v5 2/5] kbuild: Add option to turn incompatible pointer check into error
  • From: Daniel Wagner <wagi@xxxxxxxxx>
• Re: [PATCH tip v5 2/5] kbuild: Add option to turn incompatible pointer check into error
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: RCU stall and the system boot hang
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH tip v5 2/5] kbuild: Add option to turn incompatible pointer check into error
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v5 0/5] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v5 3/5] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v5 2/5] kbuild: Add option to turn incompatible pointer check into error
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v5 1/5] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v5 5/5] rcu: use simple wait queues where possible in rcutree
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v5 4/5] rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: RCU stall and the system boot hang
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: RCU stall and the system boot hang
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH tip v4 2/5] [s]wait: Add compile time type check assertion
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: RCU stall and the system boot hang
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH tip v4 2/5] [s]wait: Add compile time type check assertion
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: Triggering BUG on SIGSEGV signaling
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH tip v4 4/5] rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH tip v4 4/5] rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock
  • From: Boqun Feng <boqun.feng@xxxxxxxxx>
• [PATCH tip v4 4/5] rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v4 0/5] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v4 1/5] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v4 3/5] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v4 2/5] [s]wait: Add compile time type check assertion
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH tip v4 5/5] rcu: use simple wait queues where possible in rcutree
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Triggering BUG on SIGSEGV signaling
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [kbuild-all] [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Fengguang Wu <lkp@xxxxxxxxx>
• Re: [kbuild-all] [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Fengguang Wu <lkp@xxxxxxxxx>
• Re: [kbuild-all] [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [kbuild-all] [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [kbuild-all] [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Fengguang Wu <lkp@xxxxxxxxx>
• Re: [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] locking_selftest: Save/restore migrate_disable_atomic in locking selftest
  • From: <jianchuan.wang@xxxxxxxxxxxxx>
• Re: [RFC] [PATCH] fs/proc: add poll()ing support to /proc/interrupts
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC] [PATCH] fs/proc: add poll()ing support to /proc/interrupts
  • From: Haris Okanovic <haris.okanovic@xxxxxx>
• Re: [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [ANNOUNCE] 4.1.13-rt15
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: yjin <yanjiang.jin@xxxxxxxxxxxxx>
• Re: [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: yjin <yanjiang.jin@xxxxxxxxxxxxx>
• Re: [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RT PATCH] sched: rt: fix two possible deadlocks in push_irq_work_func
  • From: <yanjiang.jin@xxxxxxxxxxxxx>
• [ANNOUNCE] 3.4.110-rt138
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.2.72-rt105
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.10.93-rt101
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.12.50-rt68
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.14.57-rt58
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.18.24-rt22
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: kernel BUG at kernel/rtmutex_common.h:75
  • From: Yimin Deng <yimin11.deng@xxxxxxxxx>
• [ANNOUNCE] v4.1.12-rt13
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: kernel BUG at kernel/rtmutex_common.h:75
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Jonathan David <jonathan.david@xxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Armin Steinhoff <armin@xxxxxxxxxxxx>
• Re: kernel BUG at kernel/rtmutex_common.h:75
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• PREEMPT_RT kernel for Xilinx Zynq
  • From: Claudio Scordino <claudio@xxxxxxxxxxxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Henrik Austad <henrik@xxxxxxxxx>
• Re: [v4.1.10-rt10][PATCH 1/2] genirq: introduce new generic_handle_irq_rt_wa() api
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• kernel BUG at kernel/rtmutex_common.h:75
  • From: Yimin Deng <yimin11.deng@xxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Jonathan David <jonathan.david@xxxxxx>
• Re: [v4.1.10-rt10][PATCH 1/2] genirq: introduce new generic_handle_irq_rt_wa() api
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [v4.1.10-rt10][PATCH 0/2] PCI: dra7xx/dwc: fix "WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu"
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [v4.1.10-rt10][PATCH 1/2] genirq: introduce new generic_handle_irq_rt_wa() api
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Henrik Austad <henrik@xxxxxxxxx>
• Re: [v4.1.10-rt10][PATCH 1/2] genirq: introduce new generic_handle_irq_rt_wa() api
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [v4.1.10-rt10][PATCH 0/2] PCI: dra7xx/dwc: fix "WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu"
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Jonathan David <jonathan.david@xxxxxx>
• Re: [v4.1.10-rt10][PATCH 0/2] PCI: dra7xx/dwc: fix "WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu"
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [v4.1.10-rt10][PATCH 1/2] genirq: introduce new generic_handle_irq_rt_wa() api
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [v4.1.10-rt10][PATCH 0/2] PCI: dra7xx/dwc: fix "WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu"
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [v4.1.10-rt10][PATCH 1/2] genirq: introduce new generic_handle_irq_rt_wa() api
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [v4.1.10-rt10] [PATCH 2/2] PCI: dra7xx: fix "WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu"
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: Daniel Borkmann <daniel@xxxxxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: Alexei Starovoitov <alexei.starovoitov@xxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: Daniel Borkmann <daniel@xxxxxxxxxxxxx>
• [ANNOUNCE] v4.1.10-rt11
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH] bpf: convert hashtab lock to raw lock
  • From: Alexei Starovoitov <alexei.starovoitov@xxxxxxxxx>
• [PATCH] bpf: convert hashtab lock to raw lock
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Variscite VAR-SOM-AM33 with patch-3.12.10-rt15
  • From: "mr. sindar" <npc.sindar@xxxxxxxxx>
• Re: Variscite VAR-SOM-AM33 with patch-3.12.10-rt15
  • From: Carsten Emde <C.Emde@xxxxxxxxx>
• Variscite VAR-SOM-AM33 with patch-3.12.10-rt15
  • From: "mr. sindar" <npc.sindar@xxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/7] work-simple: Simple work queue implemenation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 7/7] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 5/7] completion: Use simple wait queues
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 4/7] rcu: use simple wait queues where possible in rcutree
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 1/7] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 6/7] block: blk-mq: Use swait
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 0/7] Backport of swait v3 patches to v4.1.10-rt10
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 0/7] Backport of swait v3 patches to v4.1.10-rt10
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 3/7] rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: numa.h for rt-test
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: numa.h for rt-test
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH -rt] Revert "net: use synchronize_rcu_expedited()"
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Boqun Feng <boqun.feng@xxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: numa.h for rt-test
  • From: Jeff Epler <jepler@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Boqun Feng <boqun.feng@xxxxxxxxx>
• Re: numa.h for rt-test
  • From: Javier Sanz <jsanza@xxxxxxxxx>
• BUG: scheduling while atomic: swapper/0/0/0x00010002
  • From: Javier Sanz <jsanza@xxxxxxxxx>
• numa.h for rt-test
  • From: Javier Sanz <jsanza@xxxxxxxxx>
• Re: [PATCH v3 0/4] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Simple wait queue support
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Oliver <lich000king@xxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH] rt-tests: Makefile: fixed dropped quote in help target
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH] rt-tests: Makefile: fixed dropped quote in help target
  • From: Clark Williams <williams@xxxxxxxxxx>
• [PATCH 3/3] Makefile: Remove anything to do with rpms, specs etc
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 2/3] gitattributes: add doc, remove rt.spec-in
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Subject: [PATCH 1/3] Remove rt-tests.spec-in
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [4.1.3-rt10][RFC PATCH] clk: use raw locks for locking
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [ANNOUNCE] rt-tests-v0.96
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH v2 4/4] rt-sched.h: do not unconditionally define syscall-numbers
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH v2 3/4] Android: Expand match for android in ostype
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH v2 2/4] Android: rename arch from bionic to android
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH v2 1/4] Android: clean up the bypass ifdeffery
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [RFC] e1000e: Add delays after writing to registers
  • From: Henrik Austad <henrik@xxxxxxxxx>
• [RFC] e1000e: Add delays after writing to registers
  • From: Jonathan David <jonathan.david@xxxxxx>
• [RFC] [PATCH] fs/proc: add poll()ing support to /proc/interrupts
  • From: Haris Okanovic <haris.okanovic@xxxxxx>
• [PATCH v2 1/4] Android: clean up the bypass ifdeffery
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH v2 2/4] Android: rename arch from bionic to android
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH v2 4/4] rt-sched.h: do not unconditionally define syscall-numbers
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH v2 0/4] Android: clean-up patches
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH v2 3/4] Android: Expand match for android in ostype
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: [PATCH] cyclictest: fix #ifdef broken by NO_PTHREAD_SETAFFINITY
  • From: Henrik Austad <henrik@xxxxxxxxx>
• Re: [PATCH 1/4] Android: clean up the bypass ifdeffery
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH] cyclictest: fix #ifdef broken by NO_PTHREAD_SETAFFINITY
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 2/4] android: rename arch from bionic to android
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 3/4] android: Expand match for android in ostype
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 4/4] rt-sched.h: do not unconditionally define syscall-numbers
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 1/4] Android: clean up the bypass ifdeffery
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 0/4] Android/Bionic cleanup patches
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [RFC PATCH] Add a feature to record spikes
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: talking points
  • From: Daniel Wagner <wagi@xxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [4.1.3-rt10][RFC PATCH] clk: use raw locks for locking
  • From: Michael Turquette <mturquette@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Paul Mackerras <paulus@xxxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Paul Mackerras <paulus@xxxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Paul Mackerras <paulus@xxxxxxxxxx>
• Re: [4.1.3-rt10][RFC PATCH] PM / sleep: freeze: fix bug "sleeping function called from invalid context"
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [4.1.3-rt10][RFC PATCH] PM / sleep: freeze: fix bug "sleeping function called from invalid context"
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [4.1.3-rt10][RFC PATCH] clk: use raw locks for locking
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [4.1.3-rt10][RFC PATCH] PM / sleep: freeze: fix bug "sleeping function called from invalid context"
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• talking points
  • From: Trevor Woerner <twoerner@xxxxxxxxx>
• Re: [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• [PATCH v3 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v3 3/4] rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v3 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v3 0/4] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v3 4/4] rcu: use simple wait queues where possible in rcutree
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] rcu: use simple wait queues where possible in rcutree
  • From: Daniel Wagner <wagi@xxxxxxxxx>
• Re: [PATCH v2 3/4] rcu: use simple wait queues where possible in rcutree
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx>
• [PATCH] rt: trace: add rcuidle version macro for preemptirqsoff_hist and hrtimer_interrupt
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Oliver <lich000king@xxxxxxxx>
• Re: Lockdep splat + hardlock on 4.1.10-rt9
  • From: "Luis Claudio R. Goncalves" <lclaudio@xxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx>
• [ANNOUNCE] v4.1.10-rt10
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [4.1.7-rt8][report] Very high cyclictest latency during glmark2 on i915 gpu
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [ANNOUNCE] v4.10.10-rt10
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: Lockdep splat + hardlock on 4.1.10-rt9
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Lockdep splat + hardlock on 4.1.10-rt9
  • From: "Luis Claudio R. Goncalves" <lclaudio@xxxxxxxx>
• Re: [4.1.7-rt8][report] Very high cyclictest latency during glmark2 on i915 gpu
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 5/7] specfile: add signaltest manpage to files section and remove trailing whitespace in changelog
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] specfile: add signaltest manpage to files section and remove trailing whitespace in changelog
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: oliver <lich000king@xxxxxxxx>
• Re: [PATCH v2 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH 4/7] Makefile: OBJDIR should be an order-only-prerequisite
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 5/7] specfile: add signaltest manpage to files section and remove trailing whitespace in changelog
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 3/7] Makefile: add target to create OBJDIR before use
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 2/7] Fix some trivial typos found by codespell(1)
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 6/7] Makefile: have distclean remove .asc file for tarball
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 1/7] cyclictest: Clean-ups in timerthread before working on it
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 0/7] rt-tests devel/v0.96
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 7/7] Makefile: Move TARGETS back to a more logical place in the Makefile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [4.1.7-rt8][report] Very high cyclictest latency during glmark2 on i915 gpu
  • From: Christoph Mathys <eraserix@xxxxxxxxx>
• Re: [4.1.7-rt8][report] Very high cyclictest latency during glmark2 on i915 gpu
  • From: Christoph Mathys <eraserix@xxxxxxxxx>
• [PATCH v2 0/4] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v2 3/4] rcu: use simple wait queues where possible in rcutree
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v2 2/4] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v2 4/4] rcu: Do not call swake_up_all with rnp->lock holding
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH v2 1/4] wait.[ch]: Introduce the simple waitqueue (swait) implementation
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [4.1.7-rt8][report] Very high cyclictest latency during glmark2 on i915 gpu
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [4.1.3-rt8] [report][cpuhotplug] BUG: spinlock bad magic on CPU#0, sh/137
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [4.1.7-rt8][report] Very high cyclictest latency during glmark2 on i915 gpu
  • From: Christoph Mathys <eraserix@xxxxxxxxx>
• Re: [4.1.3-rt8] [report][cpuhotplug] BUG: spinlock bad magic on CPU#0, sh/137
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Oliver <lich000king@xxxxxxxx>
• Re: [v3 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [4.1.3-rt8] [report][cpuhotplug] BUG: spinlock bad magic on CPU#0, sh/137
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [v3 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH rt-tests] Fix some trivial typos found by codespell(1)
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [v3 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH rt-tests] Fix some trivial typos found by codespell(1)
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [ANNOUNCE] rt-tests-v0.95
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [ANNOUNCE] rt-tests-v0.95
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 3/4] Android: clean up the bypass ifdeffery
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 3/4] Android: clean up the bypass ifdeffery
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: [PATCH 2/4] signaltest: properly test return value from system()
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 3/4] Android: clean up the bypass ifdeffery
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 4/4] cyclictest: move redefine of CPUSET back to uclib
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [v2 PATCH] arm64: convert patch_lock to raw lock
  • From: Will Deacon <will.deacon@xxxxxxx>
• [v2 PATCH] arm64: convert patch_lock to raw lock
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: [v2 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] Android: clean up the bypass ifdeffery
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 4/4] cyclictest: move redefine of CPUSET back to uclib
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 1/4] Properly test for return-values from read() and write()
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 2/4] signaltest: properly test return value from system()
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Move android functionality into it's own arch Makefile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Makefile: Only call cc -dumpmachine once in the makefile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 2/3] rt-migrate-test: remove space before \n
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 3/3] remove license info containing an old FSF address
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH rt-tests] drop compiling without NPTL support
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH rt-tests] drop compiling without NPTL support
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [v3 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: [v2 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [PATCH rt-tests 3/3] remove license info containing an old FSF address
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 1/3] all programs apart from sendme use pthreads so skip them on NPTL!=yes
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH rt-tests 2/3] rt-migrate-test: remove space before \n
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH rt-tests 3/3] remove license info containing an old FSF address
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH rt-tests 1/3] all programs apart from sendme use pthreads so skip them on NPTL!=yes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Makefile: Add CROSS_COMPILE for Makefile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH] signaltest: Add a man page to signaltest
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH] rt-utils: Fix some checkpatch errors in rt-utils.c
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH] rt-utils: Add John Kacur to the copyright
  • From: John Kacur <jkacur@xxxxxxxxxx>
• signaltest: Check the status of pthread_create
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 3/3] convert build system to autotools
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 2/3] remove several unused Makefiles
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 1/3] backfire: remove unused header file
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH rt-tests 2/3] remove several unused Makefiles
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH rt-tests 0/3] autotools for rt-tests 0.94+
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH rt-tests 3/3] convert build system to autotools
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH rt-tests 1/3] backfire: remove unused header file
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Long max latencies on Wandbaord / Freescale i.MX6
  • From: Mats Karrman <mats.dev.list@xxxxxxxxx>
• Long max latencies on Wandbaord / Freescale i.MX6
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• Re: [v2 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [v2 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [ANNOUNCE] 3.10.89-rt97
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.12.48-rt66
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.14.53-rt54
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [v2 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [v2 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [v2 PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: [PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: "Shi, Yang" <yang.shi@xxxxxxxxxx>
• Re: [PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: Long max latencies on Wandbaord / Freescale i.MX6
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• [PATCH] arm64: replace read_lock to rcu lock in call_break_hook
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: [PATCH] arm64: convert patch_lock to raw lock
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH] arm64: convert patch_lock to raw lock
  • From: Yang Shi <yang.shi@xxxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Oliver <lich000king@xxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx>
• Re: Long max latencies on Wandbaord / Freescale i.MX6
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v2] Makefile: Add CROSS_COMPILE for Makefile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re[2]: Long max latencies on Wandbaord / Freescale i.MX6
  • From: "Matthias Klein" <matthias.klein@xxxxxxxxxxx>
• Re: Long max latencies on Wandbaord / Freescale i.MX6
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• [PATCH v2] Makefile: Add CROSS_COMPILE for Makefile
  • From: Yuanbin Zhou <hduffddybz@xxxxxxxxx>
• Re: [PATCH] Makefile:add cross_compiler for Makefile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH] Makefile:add cross_compiler for Makefile
  • From: Yuanbin Zhou <hduffddybz@xxxxxxxxx>
• Re: 3.18 RT freezes on Raspberry Pi 2
  • From: Oliver <lich000king@xxxxxxxx>
• Re: Long max latencies on Wandbaord / Freescale i.MX6
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: Long max latencies on Wandbaord / Freescale i.MX6
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• Re: Long max latencies on Wandbaord / Freescale i.MX6
  • From: Joe Korty <joe.korty@xxxxxxxx>
• Long max latencies on Wandbaord / Freescale i.MX6
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• Re: [PATCH 0/2] convert to use generic irq handler
  • From: "santosh.shilimkar@xxxxxxxxxx" <santosh.shilimkar@xxxxxxxxxx>
• [PATCH 0/2] convert to use generic irq handler
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] gpio: omap: convert to use generic irq handler
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 1/2] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC PATCH 6/7] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC PATCH 6/7] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Is it possible to change Makefile to CMake
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 2/2] build: Generate .o, .a, and .d files in bld dir
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH 1/2] Explicity separate VPATH paths with a colon
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [PATCH] make HWLAT_DETECTOR kernel config either disabled or a module, never builtin.
  • From: Joakim Hernberg <jhernberg@xxxxxxxxxx>
• [PATCH] RFC: Android: clean up the bypass ifdeffery
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: chrt permission denied with kernel 4.3-rc2
  • From: Martin Steigerwald <martin@xxxxxxxxxxxx>
• Re: [PATCH 5/6] Makefile: add librttest to rt-migrate-test
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: [PATCH 6/6] android: adjust target for android
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [ANNOUNCE]rt-tests-0.94
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 6/6] android: adjust target for android
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 5/6] Makefile: add librttest to rt-migrate-test
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 4/6] Fix compile-warnings
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 3/6] Add a rebuild-switch to Makefile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 2/6] Add syscall-number for sched_(gs)etattr() for tile
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH 1/6] Add CROSS_COMPILE-switch to CC and AR
  • From: John Kacur <jkacur@xxxxxxxxxx>
• [ANNOUNCE] 4.1.7-rt8
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: Common clock framework API vs RT patchset\
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH 6/6] android: adjust target for android
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 5/6] Makefile: add librttest to rt-migrate-test
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 4/6] Fix compile-warnings
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 3/6] Add a rebuild-switch to Makefile
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 2/6] Add syscall-number for sched_(gs)etattr() for tile
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 1/6] Add CROSS_COMPILE-switch to CC and AR
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 0/6] RFC v2: add support for tilegx and (partial) android support to rt-test
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: [PATCH] genirq: Handle force threading of irqs with primary and thread handler
  • From: Nathan Sullivan <nathan.sullivan@xxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH] genirq: Handle force threading of irqs with primary and thread handler
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: SDHCI interrupt handling
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 3/7] Add a rebuild-switch to Makefile
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: [PATCH 6/7] rt_test.h: add numa_available() for !NUMA
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: [PATCH 6/7] rt_test.h: add numa_available() for !NUMA
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH 3/7] Add a rebuild-switch to Makefile
  • From: Josh Cartwright <joshc@xxxxxx>
• SDHCI interrupt handling
  • From: Nathan Sullivan <nathan.sullivan@xxxxxx>
• [PATCH 5/7] Makefile: add librttest to rt-migrate-test
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 6/7] rt_test.h: add numa_available() for !NUMA
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 3/7] Add a rebuild-switch to Makefile
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 2/7] Add syscall-number for sched_(gs)etattr() for tile
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 1/7] Add CROSS_COMPILE-switch to CC and AR
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 0/7] RFC v1: add support for tilegx and (partial) android support to rt-test
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 4/7] Fix compile-warnings
  • From: Henrik Austad <haustad@xxxxxxxxx>
• [PATCH 7/7] android: adjust target for android
  • From: Henrik Austad <haustad@xxxxxxxxx>
• Re: [PATCH rt-tests 9/9] cyclictest: add option for dumping the histogram in a file
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 3/9] cyclictest: drop unnecessary numa_on_and_available() check
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 9/9] cyclictest: add option for dumping the histogram in a file
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH rt-tests 4/9] signaltest: drop unused tsnorm()
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH rt-tests 3/9] cyclictest: drop unnecessary numa_on_and_available() check
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: PowerPC: massive "scheduling while atomic" reports
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• PCI: PCIe endpoint initiating write request to RC
  • From: Your name <nobelkernel@xxxxxxxxx>
• Re: [PATCH rt-tests 9/9] cyclictest: add option for dumping the histogram in a file
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 8/9] error: mark fatal, err_exit, err_quit as being noreturn
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 7/9] cyclictest: fail if use_fifo && thread creation failed
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 6/9] cyclictest: drop impossible use_fifo conditional
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 5/9] cyclictest: use correct type when allocating cpu bitmask size
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 4/9] signaltest: drop unused tsnorm()
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 3/9] cyclictest: drop unnecessary numa_on_and_available() check
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: PowerPC: massive "scheduling while atomic" reports
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: Daniel Vacek <neelx.g@xxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: PowerPC: massive "scheduling while atomic" reports
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: Daniel Vacek <neelx.g@xxxxxxxxx>
• Re: 1 of 23 peformance problems at 30 to 40 percent system load
  • From: Joël Krähemann <jkraehemann@xxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: "Jaggi, Manish" <Manish.Jaggi@xxxxxxxxxxxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [RT XFS] BUG from lockdep in xfs
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• [RFC][4.1.5-rt5 PATCH] ARM: smp: __cpu_disable: fix sleeping function called from invalid context
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [RFC][PATCH RT v2 1/3] [PATCH 1/3] locking: Add spin_trylock_or_boost() infrastructure
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC][PATCH RT v2 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC][PATCH RT v2 3/3] [PATCH 3/3] rtmutex: Wake up all top trylock waiters on unlock
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC][PATCH RT v2 2/3] [PATCH 2/3] rt: Make cpu_chill() call rt_mutex_wait_for_lock() and add new cpu_rest() as msleep(1)
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• PowerPC: massive "scheduling while atomic" reports
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: Ralf Mardorf <ralf.mardorf@xxxxxxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: Albino B Neto <bino@xxxxxxxxxx>
• Re: When would be preempt_rt patchet available for 4.2 kernel
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• When would be preempt_rt patchet available for 4.2 kernel
  • From: Manish Jaggi <mjaggi@xxxxxxxxxxxxxxxxxx>
• Re: [RT XFS] BUG from lockdep in xfs
  • From: Brian Foster <bfoster@xxxxxxxxxx>
• [RT XFS] BUG from lockdep in xfs
  • From: Austin Schuh <austin@xxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [4.1.3-rt3] [report][suspend to ram] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: ARMv7 futex latency spike
  • From: Ioan-Adrian Ratiu <adrian.ratiu@xxxxxx>
• Re: ARMv7 futex latency spike
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• ARMv7 futex latency spike
  • From: Ioan-Adrian Ratiu <adrian.ratiu@xxxxxx>
• Re: [RFC][PATCH RT 1/3] locking: Add spin_try_or_boost_lock() infrastructure
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC][PATCH RT 3/3] rt: Make cpu_chill() into yield() and add new cpu_rest() as msleep(1)
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC][PATCH RT 0/3] RT: Fix trylock deadlock without msleep() hack
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC][PATCH RT 1/3] locking: Add spin_try_or_boost_lock() infrastructure
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RFC][PATCH RT 2/3] locking: Convert trylock spinners over to spin_try_or_boost_lock()
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2] drivers: i2c: exynos5: irq spinlock rt-safe
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCHv2] drivers: i2c: exynos5: irq spinlock rt-safe
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Philipp Schrader <philipp@xxxxxxxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Philipp Schrader <philipp@xxxxxxxxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH rt-tests 1/9] cyclictest: consistently make all functions 'static'
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 4/4] hackbench: cleanup error handling in create_worker
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 3/4] rt-tests: workaround poor gzip implementations
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 2/4] rt-tests: Break out install_hwlatdetect
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 1/4] rt-tests: Allow for user-specified PYLIB
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH rt-tests 2/9] cyclictest: fixup documentation for --priority option
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH rt-tests 2/9] cyclictest: fixup documentation for --priority option
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: RCU splat on boot from an idle CPU
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• RCU splat on boot from an idle CPU
  • From: Philipp Schrader <philipp@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: i2c: exynos5: irq spinlock rt-safe
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• [PATCH rt-tests 4/9] signaltest: drop unused tsnorm()
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 2/9] cyclictest: fixup documentation for --priority option
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 5/9] cyclictest: use correct type when allocating cpu bitmask size
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 8/9] error: mark fatal, err_exit, err_quit as being noreturn
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 9/9] cyclictest: add option for dumping the histogram in a file
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 3/9] cyclictest: drop unnecessary numa_on_and_available() check
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 7/9] cyclictest: fail if use_fifo && thread creation failed
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 1/9] cyclictest: consistently make all functions 'static'
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 6/9] cyclictest: drop impossible use_fifo conditional
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 0/9] more rt-tests cleanups and a cyclictest feature
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH rt-tests 0/4] build tweaks and a bug fix
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH rt-tests 0/4] build tweaks and a bug fix
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• Re: [PATCH rt-tests 0/4] build tweaks and a bug fix
  • From: Clark Williams <williams@xxxxxxxxxx>
• [PATCH rt-tests 0/4] build tweaks and a bug fix
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 2/4] rt-tests: Break out install_hwlatdetect
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 3/4] rt-tests: workaround poor gzip implementations
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 1/4] rt-tests: Allow for user-specified PYLIB
  • From: Josh Cartwright <joshc@xxxxxx>
• [PATCH rt-tests 4/4] hackbench: cleanup error handling in create_worker
  • From: Josh Cartwright <joshc@xxxxxx>
• Re: [PATCH] drivers: i2c: exynos5: irq spinlock rt-safe
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH] drivers: i2c: exynos5: irq spinlock rt-safe
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• [PATCH RFC] rdtscbench: a nohz_full validation and benchmarking tool
  • From: Isaac Griswold-Steiner <isaac.griswold.steiner@xxxxxxxxx>
• Re: [RT] oops in 4.1.3-rt3
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [RFC PATCH 6/7] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [RFC PATCH 7/7] gpio: omap: convert to use generic irq handler
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• problems with chained IRQ handlers
  • From: Brian Silverman <brian@xxxxxxxxxxxxxxxx>
• Re: [patch -rt 1/2] KVM: use simple waitqueue for vcpu->wq
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [ANNOUNCE] rt-tests-0.93
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [4.1.3-rt3] [report][suspend to ram] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] rtmutex.c: Fix incorrect waiter check
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• AW: [PATCH] rtmutex.c: Fix incorrect waiter check
  • From: eg Engleder Gerhard <eg@xxxxxxxx>
• Re: [ANNOUNCE] rt-tests-0.93
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RT] oops in 4.1.3-rt3
  • From: Alex Goebel <alex.goebel@xxxxxxxxx>
• [ANNOUNCE] 4.1.5-rt5
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RT] oops in 4.1.3-rt3
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [4.1.3-rt3] [report][suspend to ram] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RT] oops in 4.1.3-rt3
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [ANNOUNCE] 4.1.3-rt3 - xmit queue timeout, oops, rcu stalls
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v4] iio: adc: xilinx-xadc: Push interrupts into hardirq context
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Fix VERSION in rt-migrate-test
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] Fix VERSION in rt-migrate-test
  • From: John Kacur <jkacur@xxxxxxxxxx>
• rt-tests-0.93: VERSION mistake
  • From: DIXLOR <dixlor@xxxxxxxxx>
• [ANNOUNCE] rt-tests-0.93
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Felipe Balbi <balbi@xxxxxx>
• [4.1.3-rt3] [report][suspend to ram] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Iozone write benchmark
  • From: DiXlOR <dixlor@xxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Michael Turquette <mturquette@xxxxxxxxxxxx>
• Re: [PATCH v4] iio: adc: xilinx-xadc: Push interrupts into hardirq context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v4] iio: adc: xilinx-xadc: Push interrupts into hardirq context
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Iozone write benchmark
  • From: Daniel Wagner <wagi@xxxxxxxxx>
• Iozone write benchmark
  • From: DIXLOR <dixlor@xxxxxxxxx>
• RE: [PATCH RT 2/4] Revert "timers: do not raise softirq unconditionally"
  • From: "Jiang, Yunhong" <yunhong.jiang@xxxxxxxxx>
• [PATCH v4] iio: adc: xilinx-xadc: Push interrupts into hardirq context
  • From: Xander Huff <xander.huff@xxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Michael Turquette <mturquette@xxxxxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [ANNOUNCE] 3.2.70-rt103
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.10.85-rt93
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.12.46-rt64
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.14.49-rt50
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.18.20-rt18
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [ANNOUNCE] 3.2.69-rt102
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.4.108-rt136
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.10.84-rt92
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.12.44-rt62
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.14.48-rt49
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [ANNOUNCE] 3.18.18-rt16
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH RT 2/7] mm/slub: move slab initialization into irq enabled region
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: [patch -rt 1/2] KVM: use simple waitqueue for vcpu->wq
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH RT 0/6] Linux 3.14.48-rt49-rc1
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH RT 0/6] Linux 3.14.48-rt49-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH RT 0/6] Linux 3.14.48-rt49-rc1
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [PATCH RT 2/3] xfs: Disable percpu SB on PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 1/3] mm/slub: move slab initialization into irq enabled region
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 3/3] Linux 3.2.69-rt102-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 0/3] Linux 3.2.69-rt102-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 0/3] Linux 3.4.108-rt136-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 1/3] mm/slub: move slab initialization into irq enabled region
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 2/3] xfs: Disable percpu SB on PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 3/3] Linux 3.4.108-rt136-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [RT - hwlat_detector] correctly record max when the "outer" value is maximum
  • From: Clark Williams <williams@xxxxxxxxxx>
• [PATCH RT 4/6] xfs: Disable percpu SB on PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 2/6] mm/slub: move slab initialization into irq enabled region
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 0/6] Linux 3.10.84-rt92-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 3/6] x86-Tell-irq-work-about-self-IPI-support-3.14
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 6/6] Linux 3.10.84-rt92-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 1/6] Revert "slub: delay ctor until the object is requested"
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 5/6] powerpc/kvm: Disable in-kernel MPIC emulation for PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [patch -rt 1/2] KVM: use simple waitqueue for vcpu->wq
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [patch -rt 1/2] KVM: use simple waitqueue for vcpu->wq
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH RT 6/6] Linux 3.12.44-rt62-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 0/6] Linux 3.12.44-rt62-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 4/6] xfs: Disable percpu SB on PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 2/6] mm/slub: move slab initialization into irq enabled region
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 1/6] Revert "slub: delay ctor until the object is requested"
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 5/6] powerpc/kvm: Disable in-kernel MPIC emulation for PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 3/6] x86-Tell-irq-work-about-self-IPI-support-3.14
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH RT 0/7] Linux 3.18.18-rt16-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [patch -rt 1/2] KVM: use simple waitqueue for vcpu->wq
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [patch -rt 1/2] KVM: use simple waitqueue for vcpu->wq
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH RT 0/7] Linux 3.18.18-rt16-rc1
  • From: "Wolfgang M. Reimer" <linuxball@xxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxx>
• [PATCH RT 6/6] Linux 3.14.48-rt49-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 1/6] Revert "slub: delay ctor until the object is requested"
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 2/6] mm/slub: move slab initialization into irq enabled region
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 5/6] powerpc/kvm: Disable in-kernel MPIC emulation for PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• RE: [ANNOUNCE] 4.1.3-rt3 - xmit queue timeout, oops, rcu stalls
  • From: John Dulaney <j_dulaney@xxxxxxxx>
• [PATCH RT 3/6] x86-Tell-irq-work-about-self-IPI-support-3.14
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 0/6] Linux 3.14.48-rt49-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 4/6] xfs: Disable percpu SB on PREEMPT_RT_FULL
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC v0 0/3] Simple wait queue support
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [ANNOUNCE] 4.1.3-rt3 - xmit queue timeout, oops, rcu stalls
  • From: Fernando Lopez-Lezcano <nando@xxxxxxxxxxxxxxxxxx>
• Re: 1us latency?
  • From: Clark Williams <williams@xxxxxxxxxx>
• Re: 1us latency?
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC v0 1/3] KVM: use simple waitqueue for vcpu->wq
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [RFC v0 3/3] rcu: use simple wait queues where possible in rcutree
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [RFC v0 0/3] Simple wait queue support
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [RFC v0 2/3] sched/completion: convert completions to use simple wait queues
  • From: Daniel Wagner <daniel.wagner@xxxxxxxxxxxx>
• [PATCH RT 2/7] mm/slub: move slab initialization into irq enabled region
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 1/7] Revert "slub: delay ctor until the object is requested"
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 4/7] futex: Implement lockless wakeups
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 5/7] ipc/mqueue: Implement lockless pipelined wakeups
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 7/7] Linux 3.18.18-rt16-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 3/7] sched: Implement lockless wake-queues
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 0/7] Linux 3.18.18-rt16-rc1
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH RT 6/7] kernel/irq_work: fix non RT case
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: 1us latency?
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Common clock framework API vs RT patchset
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RT] oops in 4.1.3-rt3
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Common clock framework API vs RT patchset
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RT] oops in 4.1.3-rt3
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxx>
• Re: [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context
  • From: Xander Huff <xander.huff@xxxxxx>
• [RT] oops in 4.1.3-rt3
  • From: Clark Williams <williams@xxxxxxxxxx>
• Re: 1us latency?
  • From: pavel <pavel@xxxxxxxxxxx>
• Re: 1us latency?
  • From: Clark Williams <williams@xxxxxxxxxx>
• Re: 1us latency?
  • From: pavel <pavel@xxxxxxxxxxx>
• Re: 1us latency?
  • From: pavel <pavel@xxxxxxxxxxx>
• Re: 1us latency?
  • From: Clark Williams <williams@xxxxxxxxxx>
• 1us latency?
  • From: pavel <pavel@xxxxxxxxxxx>
• Re: Hung task for proc_cgroup_show
  • From: Christoph Mathys <eraserix@xxxxxxxxx>
• [PATCH RT] dump stack: don't disable preemption during trace
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: rtmutex deadlock detected (3.18.19-rt15)
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: rtmutex deadlock detected (3.18.19-rt15)
  • From: DIXLOR <dixlor@xxxxxxxxx>
• Re: rtmutex deadlock detected (3.18.19-rt15)
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• rtmutex deadlock detected (3.18.19-rt15)
  • From: DIXLOR <dixlor@xxxxxxxxx>
• Re: Where IOSCHED ?
  • From: pavel <pavel@xxxxxxxxxxx>
• [ANNOUNCE] 4.1.3-rt3
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Where IOSCHED ?
  • From: pavel <pavel@xxxxxxxxxxx>
• Re: Where IOSCHED ?
  • From: pavel <pavel@xxxxxxxxxxx>
• Re: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: Gratian Crisan <gratian.crisan@xxxxxx>
• Re: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] cyclictest: Fix long priority help text option
  • From: John Kacur <jkacur@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Where IOSCHED ?
  • From: "Wolfgang M. Reimer" <linuxball@xxxxxxxxx>
• Re: Where IOSCHED ?
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Where IOSCHED ?
  • From: Pavel Vasilyev <pavel@xxxxxxxxxxx>
• Scheduling while atomic in find_task_lock_mm
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH 1/1] cyclictest: Fix long priority help text option
  • From: Clark Williams <williams@xxxxxxxxxx>
• Re: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH 1/1] cyclictest: Fix long priority help text option
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [4.1.2-rt1 PATCH] include/linux/pid.h: fix build error
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: "Koehrer Mathias (ETAS/ESW5)" <mathias.koehrer@xxxxxxxx>
• Re: [PATCH 1/1] 3.18.17-rt14 locktorture: Do NOT include rwlock.h directly
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [4.1.2-rt1 PATCH] include/linux/pid.h: fix build error
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/1] 3.18.17-rt14 locktorture: Do NOT include rwlock.h directly
  • From: linuxball <linuxball@xxxxxxxxx>
• AW: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: eg Engleder Gerhard <eg@xxxxxxxx>
• Re: udelay and ndelay includes and linker
  • From: Joël Krähemann <jkraehemann@xxxxxxxxx>
• Re: 1 of 23 peformance problems at 30 to 40 percent system load
  • From: Joël Krähemann <jkraehemann@xxxxxxxxx>
• [PATCH v3] iio: adc: xilinx-xadc: Push interrupts into threaded context
  • From: Xander Huff <xander.huff@xxxxxx>
• Re: [PATCH 1/1] 3.18.17-rt14 locktorture: Do NOT include rwlock.h directly
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [4.1.2-rt1] build failure
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: unable to handle kernel NULL pointer dereference on 3.18.13-rt10
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: 1 of 23 peformance problems at 30 to 40 percent system load
  • From: linuxball <linuxball@xxxxxxxxx>
• [PATCH 1/1] 3.18.17-rt14 locktorture: Do NOT include rwlock.h directly
  • From: linuxball <linuxball@xxxxxxxxx>