Linux Renesas SOC Development
[Prev Page][Next Page]
- Re: [PATCH v4 1/4] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286, (continued)
- [PATCH] drm/bridge/sii902x: Fix EDID readback,
Fabrizio Castro
- [PATCH] thermal: rcar_gen3_thermal: Add Standby-mode function support,
Nguyen An Hoan
- [PATCH v2 00/30] v4l: add support for multiplexed streams,
Niklas Söderlund
- [PATCH v2 04/30] v4l: mc: Start walk from a specific pad in use count calculation,
Niklas Söderlund
- [PATCH v2 05/30] media: entity: Move the pipeline from entity to pads,
Niklas Söderlund
- [PATCH v2 06/30] media: entity: Use pad as the starting point for a pipeline,
Niklas Söderlund
- [PATCH v2 07/30] media: entity: Add has_route entity operation,
Niklas Söderlund
- [PATCH v2 08/30] media: entity: Add media_has_route() function,
Niklas Söderlund
- [PATCH v2 10/30] media: entity: Use routing information during graph traversal,
Niklas Söderlund
- [PATCH v2 09/30] media: entity: Swap pads if route is checked from source to sink,
Niklas Söderlund
- [PATCH v2 11/30] media: entity: Skip link validation for pads to which there is no route to,
Niklas Söderlund
- [PATCH v2 12/30] media: entity: Add an iterator helper for connected pads,
Niklas Söderlund
- [PATCH v2 13/30] media: entity: Add only connected pads to the pipeline,
Niklas Söderlund
- [PATCH v2 14/30] media: entity: Add debug information in graph walk route check,
Niklas Söderlund
- [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations,
Niklas Söderlund
- [PATCH v2 15/30] media: entity: Look for indirect routes,
Niklas Söderlund
- [PATCH v2 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING,
Niklas Söderlund
- [PATCH v2 18/30] v4l: subdev: Take routing information into account in link validation,
Niklas Söderlund
- [PATCH v2 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes,
Niklas Söderlund
- [PATCH v2 21/30] v4l: Add bus type to frame descriptors,
Niklas Söderlund
- [PATCH v2 22/30] v4l: Add CSI-2 bus configuration to frame descriptors,
Niklas Söderlund
- [PATCH v2 23/30] v4l: Add stream to frame descriptor,
Niklas Söderlund
- [PATCH v2 19/30] v4l: subdev: Improve link format validation debug messages,
Niklas Söderlund
- [PATCH v2 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype,
Niklas Söderlund
- [PATCH v2 26/30] adv748x: csi2: describe the multiplexed stream,
Niklas Söderlund
- [PATCH v2 25/30] adv748x: csi2: only allow formats on sink pads,
Niklas Söderlund
- [PATCH v2 27/30] adv748x: csi2: add internal routing configuration,
Niklas Söderlund
- [PATCH v2 28/30] adv748x: afe: add routing support,
Niklas Söderlund
- [PATCH v2 29/30] rcar-csi2: use frame description information to configure CSI-2 bus,
Niklas Söderlund
- [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing,
Niklas Söderlund
- Re: [PATCH v2 00/30] v4l: add support for multiplexed streams,
Sakari Ailus
[PATCH 0/4] Add QSPI flash support to iwg23s,
Fabrizio Castro
[PATCH v3 0/3] mmc: tmio: fix reset operation,
Niklas Söderlund
[PATCH] arm64: dts: renesas: enable HS400 on R-Car Gen3,
Niklas Söderlund
[PATCH 0/2] renesas: rcar-gen3: add HS400 quirk for SD clock,
Niklas Söderlund
[PATCH v2 0/3] mmc: renesas_sdhi: extend quirk selection to handle ES revisions,
Niklas Söderlund
[PATCH] mmc: tmio: delete wait in tuning process,
Niklas Söderlund
[PATCH] mmc: renesas_sdhi: remove workaround for HS400 clock,
Niklas Söderlund
[RFC] drm/bridge/sii902x: Fix EDID readback,
Fabrizio Castro
[PATCH v2 0/2] irqchip: Add support for Renesas RZ/N1 GPIO interrupt multiplexer,
Phil Edworthy
[PATCH] thermal: rcar_gen3_thermal: Fix does not have interrupts counting,
Nguyen An Hoan
[PATCH] serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout,
Yoshihiro Shimoda
[PATCH 0/2] pinctrl: sh-pfc: r8a77965: Add VIN4 and VIN5,
Jacopo Mondi
[PATCH 0/2] pinctrl: sh-pfc: gen2: initialize TDSEL register,
Wolfram Sang
[PATCH 1/2] arm64: dts: renesas: ulcb: Switch eMMC bus to 1V8,
Marek Vasut
[RFC] gpio: rcar: Request GPIO before enabling interrupt,
Fabrizio Castro
[PATCH] MAINTAINERS: add maintainer for Renesas I2C driver,
Chris Brandt
[PATCH 1/2] ARM: dts: r8a77470: Add watchdog support to SoC dtsi,
Biju Das
[PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support,
Biju Das
[PATCH 1/2] ARM: dts: r8a77470: Add CMT SoC specific support,
Biju Das
[PATCH] dt-bindings: timer: renesas, cmt: Document r8a77470 CMT support,
Biju Das
[PATCH] arm64: dts: renesas: r8a7796: Add CMT device nodes,
Biju Das
[PATCH] dt-bindings: timer: renesas, cmt: Document r8a7796 CMT support,
Biju Das
[PATCH 1/2] dt-bindings: dmaengine: usb-dmac: Add binding for r8a77470,
Biju Das
[PATCH 0/7] Add RZ/G1C USB2.0 Host support,
Biju Das
[PATCH linux-next v1 0/4] Add AVB Counter Clock,
jiada_wang
[v2 PATCH] thermal: rcar_gen3_thermal: Fix init value of IRQCTL register,
Nguyen An Hoan
[PATCH v5 0/3] mmc: tmio_mmc: Add support for RZ/A2,
Chris Brandt
[PATCH 0/3] PM: Renesas: Remove dummy runtime PM callbacks,
Jarkko Nikula
[PATCH] thermal: rcar_gen3_thermal: Fix init value of IRQCTL register,
Nguyen An Hoan
[PATCH v3] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3,
Yoshihiro Shimoda
renesas-drivers-2018-10-23-v4.19,
Geert Uytterhoeven
[PATCH] arm64: dts: renesas: salvator-common: add companion property in usb3_peri0,
Yoshihiro Shimoda
[PATCH] arm64: dts: renesas: r8a77990: add/enable USB3.0 peripheral device node,
Yoshihiro Shimoda
[PATCH] drm: rcar-du: Re-update the DSYSR register value for start/stop,
Nguyen An Hoan
[PATCH 0/6] gpio: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/6] gpu: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/9] net: simplify getting .driver_data,
Wolfram Sang
- [PATCH 9/9] net: phy: mdio-mux-bcm-iproc: simplify getting .driver_data,
Wolfram Sang
- [PATCH 8/9] net: ethernet: wiznet: w5300: simplify getting .driver_data,
Wolfram Sang
- [PATCH 7/9] net: ethernet: ti: davinci_emac: simplify getting .driver_data,
Wolfram Sang
- [PATCH 1/9] net: dsa: bcm_sf2: simplify getting .driver_data,
Wolfram Sang
- [PATCH 3/9] net: ethernet: cadence: macb_main: simplify getting .driver_data,
Wolfram Sang
- [PATCH 5/9] net: ethernet: smsc: smc91x: simplify getting .driver_data,
Wolfram Sang
- [PATCH 4/9] net: ethernet: davicom: dm9000: simplify getting .driver_data,
Wolfram Sang
- [PATCH 6/9] net: ethernet: ti: cpsw: simplify getting .driver_data,
Wolfram Sang
- [PATCH 2/9] net: dsa: qca8k: simplify getting .driver_data,
Wolfram Sang
- Re: [PATCH 0/9] net: simplify getting .driver_data,
David Miller
- Re: [PATCH 0/9] net: simplify getting .driver_data,
Florian Fainelli
[PATCH 0/5] pinctrl: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] rtc: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] ptp: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] slimbus: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/5] thermal: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/3] spi: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] net: dsa: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] uio: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] tty: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] bus: simplify getting .driver_data,
Wolfram Sang
[PATCH 0/1] ata: simplify getting .driver_data,
Wolfram Sang
[PATCH 00/03] Further 32-bit product name updates,
Magnus Damm
[PATCH/RFC] iommu/ipmmu-vmsa: R-Car M3-N/V3H/E3 AVB whitelist prototype,
Magnus Damm
[PATCH 00/03] Connect R-Car Gen3 Ethernet-AVB to IPMMU,
Magnus Damm
[PATCH/RFT] arm64: dts: renesas: r8a77990-ebisu: Enable i2c,
Yoshihiro Kaneko
[PATCH/RFT] arm64: dts: renesas: r8a77990: Add I2C-DVFS device node,
Yoshihiro Kaneko
[PATCH/RFT] arm64: dts: renesas: r8a77990: Enable I2C DMA,
Yoshihiro Kaneko
[PATCH/RFT] arm64: dts: renesas: r8a77990-ebisu: Add serial console pins,
Yoshihiro Kaneko
[PATCH/RFT] pinctrl: sh-pfc: r8a77990: Add HSCIF pins, groups, and functions,
Yoshihiro Kaneko
[PATCH/RFT] arm64: dts: renesas: r8a77990: Add all HSCIF nodes,
Yoshihiro Kaneko
[PATCH/RFT] arm64: dts: renesas: r8a77990: Add SCIF-{0,1,3,4,5} device nodes,
Yoshihiro Kaneko
[PATCH] i2c: rcar: cleanup DMA for all kinds of failure,
Wolfram Sang
[PATCH v2 0/2] pinctrl: Add RZ/A2 pin and gpio driver,
Chris Brandt
Re: HDMI doesn't work on ULCB board,
Laurent Pinchart
[PATCH 0/3] R-Car LVDS: Add R8A77965 (M3-N) support,
Laurent Pinchart
[PATCH] drm: rcar-du: Fix vblank initialization,
Laurent Pinchart
[PATCH] ARM: dts: r8a779[01]: Disable unconnected LVDS encoders,
Laurent Pinchart
[PATCH] arm64: renesas_defconfig: Enable R-Car thermal driver,
Simon Horman
[PATCH] arm64: defconfig: Enable R-Car thermal driver,
Simon Horman
[PATCH v2] iommu/ipmmu-vmsa: Hook up r8a77990 DT matching code,
Simon Horman
[PATCH] dt-bindings: spi: sh-msiof: document R8A779{7|8}0 bindings,
Sergei Shtylyov
[PATCH v2 3/5] drm: rcar-du: Add r8a77470 support,
Fabrizio Castro
[PATCH] pinctrl: sh-pfc: Reduce kernel size for narrow VIN channels,
Geert Uytterhoeven
[PATCH/RFC v2] serial: sh-sci: Fix fallback to PIO on DMA failure,
Geert Uytterhoeven
[PATCH] MAINTAINERS: Add Renesas RZ/A and RZ/N files to Renesas pinctrl section,
Geert Uytterhoeven
[PATCH v4 2/6] pinctrl: sh-pfc: r8a77470: Add SDHI support,
Fabrizio Castro
[PATCH] MAINTAINERS: Remove Laurent Pinchart as Renesas pinctrl maintainer,
Laurent Pinchart
[PATCH] drm: rcar-du: Fix the return value in case of error in 'rcar_du_crtc_set_crc_source()',
Christophe JAILLET
[PATCH v2] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3,
Yoshihiro Shimoda
[PATCH] arm64: dts: renesas: revise hsusb's reg size,
Yoshihiro Shimoda
[PATCH v2 0/3] mmc: tmio: Fix reset operation,
Niklas Söderlund
[PATCH v2] pinctrl: rzn1: Fix check for used MDIO bus,
Phil Edworthy
USB2.0 blocks on RZ/G1C,
Biju Das
[PATCH/RFT] arm64: dts: renesas: r8a77990: add thermal device support,
Yoshihiro Kaneko
[PATCH/RFT 0/2] thermal: add suport for R8A77990,
Yoshihiro Kaneko
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announcements]
[Kernel Newbies]
[Linux RAID]
[Linux ATA RAID]
[Git]
[Linux Netdev]
[Netfilter]
