> On September 14, 2018 at 11:10 AM Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> wrote: > > > On the D3 and E3 SoCs, the LVDS encoder can derive its internal pixel > clock from an externally supplied clock, either through the EXTAL pin or > through one of the DU_DOTCLKINx pins. Add corresponding clocks to the DT > bindings. > > To retain backward compatibility with DT that don't specify the > clock-names property, the functional clock must always be specified > first, and the clock-names property is optional when only the functional > clock is specified. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > --- > Changes since v1: > > - Clarified wording > --- > .../devicetree/bindings/display/bridge/renesas,lvds.txt | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > index 13af7e2ac7e8..3aeb0ec06fd0 100644 > --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > @@ -19,7 +19,17 @@ Required properties: > - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders > > - reg: Base address and length for the memory-mapped registers > -- clocks: A phandle + clock-specifier pair for the functional clock > +- clocks: A list of phandles + clock-specifier pairs, one for each entry in > + the clock-names property. > +- clock-names: Name of the clocks. This property is model-dependent. > + - The functional clock, which mandatory for all models, shall be listed > + first, and shall be named "fck". > + - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or > + DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be > + named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN > + numerical index. > + - When the clocks property only contains the functional clock, the > + clock-names property may be omitted. > - resets: A phandle + reset specifier for the module reset > > Required nodes: Reviewed-by: Ulrich Hecht <uli+renesas@xxxxxxxx> CU Uli
