Hi Philip,
On Thu, Sep 20, 2018 at 11:27 AM Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
> On Wed, 2018-09-19 at 17:24 +0200, Geert Uytterhoeven wrote:
> > On Wed, Sep 19, 2018 at 4:58 PM Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
> [...]
> > > I consider requesting exclusive access to a shared reset line a misuse
> > > of the API. Are there such cases? Can they be fixed?
> >
> > I guess there are plenty.
>
> I did a cursory search for drivers that request exclusive reset controls
> for resets that have multiple phandle references in the corresponding
> DT. So far I have found none.
OK.
> > Whether a line is shared or dedicated depends on SoC integration.
> >
> > The issue is that a driver requesting exclusive access has no way to know
> > if the reset line is dedicated to its device or not. If no other
> > driver requested the reset control (most drivers don't use reset
> > controls), it will succeed.
>
> True. It would be great to have a way to make sure an exclusive request
> for a shared reset line never succeeds.
>
> > > > Sometimes a driver needs to reset a specific hardware block, and be 100%
> > > > sure it has no impact on other hardware blocks. This is e.g. the case
> > > > for virtualization with device pass-through, where the host wants to
> > > > reset any exported device before and after exporting it for use by the
> > > > guest, for isolation.
> > > >
> > > > Hence a new flag for dedicated resets is added to the internal methods,
> > > > with a new public reset_control_get_dedicated() method, to obtain an
> > > > exclusive handle to a reset that is dedicated to one specific hardware
> > > > block.
> > >
> > > I'm not sure a new flag is necessary, this is what exclusive resets
> > > should be.
> >
> > So perhaps the check should be done for the existing exclusive resets
> > instead, without adding a new flag?
>
> That would be my preference, if possible.
OK, will make it so.
> > > Also I fear there will be confusion about the difference between
> > > exclusive (refering to the reset control) and dedicated (refering to
> > > the reset line) reset controls.
> >
> > Indeed, exclusive has multiple meanings here:
> > 1. Exclusive vs. shared access to the reset control,
> > 2. Reset line is dedicated to a single device, or shared with multiple
> > devices.
>
> 2. is the more important factor, and that's what I have in mind when
> talking about exclusive vs. shared resets. Admittedly, the kernel doc
> comments only mention 1.
OK. That did contribute to my confustion...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
