From: Biju Das <biju.das@xxxxxxxxxxxxxx>
Specify EtherAVB PHY IRQ in the board specific device tree, now that we
have GPIO support.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 56182eec81fb..22da819f186b 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -35,6 +35,8 @@
phy3: ethernet-phy@3 {
reg = <3>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
};
};
--
2.11.0
