Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- [PATCH v4 4/9] ARM: dts: omap3-overo: Enable WiFi/BT combo, (continued)
- [GIT PULL] omap device tree changes for v3.15, part 2,
Tony Lindgren
- [PATCH v3] crypto: omap-sham: Map SG pages if they are HIGHMEM before accessing,
Joel Fernandes
- [PATCH] dma: omap-dma: Implement device_slave_caps callback,
Peter Ujfalusi
- [PATCH v2 0/4] mtd: nand: omap: add support for BCH16_ECC,
Pekon Gupta
- [PATCH 0/8] USB support for DRA7-evm,
Roger Quadros
- [PATCH v3 0/2] AM43xx-ePOS-EVM audio support with TLV320AIC31XX driver,
Jyri Sarha
- [RFC PATCH 0/9] drivers: dma: Add support for dma-channel router,
Sricharan R
- [RFC PATCH 1/9] drivers: dma: omap-dma: Avoid hard-coding of the dma-request channels,
Sricharan R
- [RFC PATCH 9/9] arm: dts: dra7: Change the total dma-req numbers to crossbar channels,
Sricharan R
- [RFC PATCH 7/9] arm: dts: dra: Add dma-request crossbar phandle to dma-specs,
Sricharan R
- [RFC PATCH 8/9] arm: dra: Enable dma crossbar support on dra7xx,
Sricharan R
- [RFC PATCH 5/9] drivers: dma: Add dma crossbar driver,
Sricharan R
- [RFC PATCH 6/9] arm: dts: dra: Add dma crossbar node,
Sricharan R
- [RFC PATCH 4/9] drivers: omap-dma: Add crossbar line as a resource to omap_chan structure,
Sricharan R
- [RFC PATCH 3/9] drivers: dma: omap-dma: Add a seperate xlate function to get router data,
Sricharan R
- [RFC PATCH 2/9] drivers: dma: of-dma: Add support for dma-request line routers,
Sricharan R
- Re: [RFC PATCH 0/9] drivers: dma: Add support for dma-channel router,
Rob Herring
- [PATCH v3 0/5] Add USB nodes for am43xx epos and gp evm,
George Cherian
- [PATCH v3 0/8] ARM: OMAP: SATA support for OMAP5 & DRA7,
Roger Quadros
- [PATCH v2 0/5] Add USB nodes for am43xx epos and gp evm,
George Cherian
- [PATCH v4] phy: omap-control: update dra7 and am437 usb2 bindings,
Kishon Vijay Abraham I
- [PATCH v3] phy: ti-pipe3: Add SATA DPLL support,
Kishon Vijay Abraham I
- [PATCH v3] phy: ti-pipe3: cleanup clock handling,
Kishon Vijay Abraham I
- [PATCH v3] phy: omap-control: update dra7 and am437 usb2 bindings,
Kishon Vijay Abraham I
- [PATCHv8 0/4] power_supply: Introduce power supply charging driver,
Jenny TC
- [PATCH] ARM: OMAP2+: INTC: Acknowledge stuck active interrupts,
Stefan Sørensen
- [PATCH v2 00/13][RESEND] ARM: OMAP: SATA support for OMAP5 & DRA7,
Roger Quadros
- [PATCH v2 13/13] ARM: dts: dra7: add OCP2SCP3 and SATA nodes,
Roger Quadros
- [PATCH v2 12/13] ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods,
Roger Quadros
- [PATCH v2 11/13] ARM: dts: omap5: add sata node,
Roger Quadros
- [PATCH v2 10/13] ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods,
Roger Quadros
- [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver,
Roger Quadros
- [PATCH v2 06/13] phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY,
Roger Quadros
- [PATCH v2 07/13] phy: ti-pipe3: streamline PHY operations,
Roger Quadros
- [PATCH v2 08/13] phy: ti-pipe3: Fix suspend/resume and module reload,
Roger Quadros
- [PATCH v2 05/13] phy: ti-pipe3: Add SATA DPLL support,
Roger Quadros
- [PATCH v2 04/13] phy: ti-pipe3: cleanup clock handling,
Roger Quadros
- [PATCH v2 02/13] phy: omap-control: Update DT binding information,
Roger Quadros
- [PATCH v2 01/13] phy: rename struct omap_control_usb to struct omap_control_phy,
Roger Quadros
[PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7,
Roger Quadros
- [PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings,
Roger Quadros
- [PATCH v2 12/13] ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods,
Roger Quadros
- [PATCH v2 10/13] ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods,
Roger Quadros
- [PATCH v2 08/13] phy: ti-pipe3: Fix suspend/resume and module reload,
Roger Quadros
- [PATCH v2 13/13] ARM: dts: dra7: add OCP2SCP3 and SATA nodes,
Roger Quadros
- [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver,
Roger Quadros
- [PATCH v2 11/13] ARM: dts: omap5: add sata node,
Roger Quadros
- [PATCH v2 05/13] phy: ti-pipe3: Add SATA DPLL support,
Roger Quadros
- [PATCH v2 01/13] phy: rename struct omap_control_usb to struct omap_control_phy,
Roger Quadros
- [PATCH v2 07/13] phy: ti-pipe3: streamline PHY operations,
Roger Quadros
- Re: [PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7,
Roger Quadros
- [PATCH v2 04/13] phy: ti-pipe3: cleanup clock handling,
Roger Quadros
- [PATCH v2 06/13] phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY,
Roger Quadros
- [PATCH v2 02/13] phy: omap-control: Update DT binding information,
Roger Quadros
- [PATCH v2 01/13][RESEND] phy: rename struct omap_control_usb to struct omap_control_phy,
Roger Quadros
[RESEND PATCH 1/1] arm: dts: am33xx: correcting dt node unit address for usb,
Mugunthan V N
[PATCH 00/10] arch/arm OMAP IOMMU patches for 3.15,
Suman Anna
- [PATCH 08/10] ARM: dts: OMAP3: Add IVA IOMMU node,
Suman Anna
- [PATCH 07/10] ARM: dts: OMAP3: Update ISP IOMMU node,
Suman Anna
- [PATCH 02/10] ARM: OMAP3: fix iva mmu programming issues,
Suman Anna
- [PATCH 04/10] ARM: OMAP2+: use pdata quirks for iommu reset lines,
Suman Anna
- [PATCH 03/10] ARM: OMAP2+: change the ISP device archdata MMU name for DT,
Suman Anna
- [PATCH 09/10] ARM: dts: OMAP4: Add IOMMU nodes,
Suman Anna
- [PATCH 01/10] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2,
Suman Anna
- [PATCH 06/10] ARM: OMAP2+: extend iommu pdata-quirks to OMAP5,
Suman Anna
- [PATCH 10/10] ARM: dts: OMAP5: Add IOMMU nodes,
Suman Anna
- [PATCH 05/10] ARM: OMAP5: hwmod data: add mmu data for ipu & dsp,
Suman Anna
- Re: [PATCH 00/10] arch/arm OMAP IOMMU patches for 3.15,
Suman Anna
[RFC] CPSW: dual standalone emac mode / bonding,
Christian Engelmayer
[PATCH v8 0/3] mmc: omap_hsmmc: Enable SDIO IRQ.,
Andreas Fenkart
[PATCH] ARM: dts: am335x-evmsk: enable dual_emac mode,
yegorslists
[PATCH v2] crypto: omap-sham: kmap SG pages before appending,
Joel Fernandes
[PATCH 00/18] ARM: OMAP2+: CM/PRM cleanup set,
Tero Kristo
- [PATCH 01/18] ARM: OMAP3: CM: remove a few OMAP34XX_CM_REGADDR defines,
Tero Kristo
- [PATCH 02/18] ARM: OMAP2+: prcm: add omap_test_timeout to prcm-common.h,
Tero Kristo
- [PATCH 03/18] ARM: OMAP2/3: CM: remove some external dependencies,
Tero Kristo
- [PATCH 06/18] ARM: OMAP3: PRM: move modem reset to PRM driver,
Tero Kristo
- [PATCH 05/18] ARM: OMAP3: PRM: move iva reset to PRM driver,
Tero Kristo
- [PATCH 08/18] ARM: OMAP3: PRM: add API for checking and clearing cold reset status,
Tero Kristo
- [PATCH 04/18] ARM: OMAP3: PRM: move prcm wakeup helper to prm driver,
Tero Kristo
- [PATCH 09/18] ARM: OMAP3: PRM: add API for saving PRM scratchpad contents,
Tero Kristo
- [PATCH 07/18] ARM: OMAP2/3: CM: remove direct register access macros from common header,
Tero Kristo
- [PATCH 12/18] ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register,
Tero Kristo
- [PATCH 11/18] ARM: OMAP24xx: PRM: move PRM init code within PRM driver from PM core,
Tero Kristo
- [PATCH 10/18] ARM: OMAP24xx: PRM: add API for clearing wakeup status bits,
Tero Kristo
- [PATCH 15/18] ARM: OMAP4+: PRM: make prm register access internal to PRM driver only,
Tero Kristo
- [PATCH 14/18] ARM: OMAP2/3: PRM: split PRM header file to common and internal versions,
Tero Kristo
- [PATCH 17/18] ARM: OMAP3: PRM: move modem reset and iva2 idle to PRM driver,
Tero Kristo
- [PATCH 16/18] ARM: OMAP3: control: add API for setting up the modem pads,
Tero Kristo
- [PATCH 18/18] ARM: OMAP3: control: isolate control module init to its own function,
Tero Kristo
- [PATCH 13/18] ARM: OMAP3: PRM: move PRM init code from PM core to the driver,
Tero Kristo
- Re: [PATCH 00/18] ARM: OMAP2+: CM/PRM cleanup set,
Tony Lindgren
- Re: [PATCH 00/18] ARM: OMAP2+: CM/PRM cleanup set,
Tero Kristo
Re: randconfig build error with next-20140304, in drivers/usb/dwc3/core.c,
Felipe Balbi
[PATCH v3 0/5] drivers: bus: omap_l3: Conversion to devm_*,
Peter Ujfalusi
[PATCHv2 00/14]: ARM: OMAP2: clock DT conversion,
Tero Kristo
- [PATCHv2 01/14] ARM: OMAP2: convert sys_ck and osc_ck to standard clock types,
Tero Kristo
- [PATCHv2 02/14] ARM: OMAP2420: clock: get rid of fixed-div property use,
Tero Kristo
- [PATCHv2 04/14] CLK: TI: DPLL: add support for omap2 core dpll,
Tero Kristo
- [PATCHv2 03/14] CLK: TI: DPLL: simplify autoidle register detection logic,
Tero Kristo
- [PATCHv2 05/14] CLK: TI: APLL: add support for omap2 aplls,
Tero Kristo
- [PATCHv2 07/14] CLK: TI: interface: add support for omap2430 specific interface clock,
Tero Kristo
- [PATCHv2 06/14] CLK: TI: gate: fixed DT binding documentation bugs,
Tero Kristo
- [PATCHv2 08/14] CLK: TI: OMAP2: add clock init support,
Tero Kristo
- [PATCHv2 09/14] ARM: OMAP2: PRM: add support for OMAP2 specific clock providers,
Tero Kristo
- [PATCHv2 11/14] ARM: OMAP2: clock: add DT boot support for cpufreq_ck,
Tero Kristo
- [PATCHv2 12/14] ARM: OMAP2: clock: use DT clock boot if available,
Tero Kristo
- [PATCHv2 10/14] ARM: dts: omap2 clock data,
Tero Kristo
- Message not available
Message not available
Re: [PATCHv2 00/14]: ARM: OMAP2: clock DT conversion,
Tero Kristo
[PATCH v2 0/5] drivers: bus: omap_l3: Conversion to devm_*,
Peter Ujfalusi
[PATCHv7 0/4] power_supply: Introduce power supply charging driver,
Jenny TC
[PATCH RESEND] sound: omap: n810: fix init with DT boot,
Aaro Koskinen
[PATCH RESEND] mmc: omap_hsmmc: support more DT properties,
Daniel Mack
Ethernet controller not starting,
Jon Ringle
[PATCH 00/12] ARM: OMAP: SATA support for OMAP5 & DRA7,
Roger Quadros
- [PATCH 07/12] ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods,
Roger Quadros
- [PATCH 08/12] ARM: dts: omap5: add sata node,
Roger Quadros
- [PATCH 12/12] ARM: dts: dra7: add OCP2SCP3 and SATA nodes,
Roger Quadros
- [PATCH 10/12] phy: ti-pipe3: Fix suspend/resume and module reload,
Roger Quadros
- [PATCH 11/12] ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods,
Roger Quadros
- [PATCH 09/12] phy: ti-pipe3: streamline PHY operations,
Roger Quadros
- [PATCH 06/12] phy: omap: Select OMAP_OCP2SCP bus driver,
Roger Quadros
- [PATCH 01/12] phy: rename struct omap_control_usb to struct omap_control_phy,
Roger Quadros
- [PATCH 04/12] ARM: dts: omap5: Add clocks to usb3_phy node,
Roger Quadros
- [PATCH 05/12] phy: ti-pipe3: Add SATA DPLL support,
Roger Quadros
- [PATCH 03/12] phy: ti-pipe3: cleanup clock handling,
Roger Quadros
- [PATCH 02/12] phy: omap-control: Update DT binding information,
Roger Quadros
[RESEND Patch 0/9] dts pending patches for TI omap,
Mugunthan V N
- [RESEND Patch 6/9] ARM: dts: DRA7: Add device nodes for ABB,
Mugunthan V N
- [RESEND Patch 9/9] ARM: DTS: DRA7: Add routable-irqs property for gic node,
Mugunthan V N
- [RESEND Patch 8/9] ARM: DTS: DRA7: Replace peripheral interrupt numbers with crossbar inputs,
Mugunthan V N
- [RESEND Patch 5/9] ARM: dts: OMAP4: Add device nodes for ABB,
Mugunthan V N
- [RESEND Patch 7/9] ARM: DTS: DRA7: Add crossbar device binding,
Mugunthan V N
- [RESEND Patch 4/9] ARM: dts: OMAP36xx: Add device node for ABB,
Mugunthan V N
- [RESEND Patch 2/9] ARM: dts: am335x-evm: add SD card hotplug support,
Mugunthan V N
- [RESEND Patch 3/9] ARM: dts: am43x-epos-evm: add SD card hotplug support,
Mugunthan V N
- [RESEND Patch 0/9] dts pending patches for TI omap,
Mugunthan V N
- [RESEND Patch 1/9] ARM: dts: am437x gp-evm: add sd card dt nodes,
Mugunthan V N
- Re: [RESEND Patch 0/9] dts pending patches for TI omap,
Tony Lindgren
[PATCH 0/5] Add USB nodes for am43xx epos and gp evm,
George Cherian
[PATCH] OMAPDSS: convert pixel clock to common videomode style,
Tomi Valkeinen
[PATCH v5 0/6] Make dwc3 use Generic PHY Framework,
Kishon Vijay Abraham I
[PATCH 1/1] net: cpsw: fix cpdma rx descriptor leak on down interface,
Mugunthan V N
Help needed USB hub disconnected at resume,
Marc Murphy
[PATCH v3 0/7] ARM: dts: Better support for Gumstix Overo (for 3.15?),
Florian Vaussard
[PATCH 0/7] v4l: ti-vpe: Some VPE fixes and enhancements,
Archit Taneja
- [PATCH 1/7] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs,
Archit Taneja
- [PATCH 2/7] v4l: ti-vpe: register video device only when firmware is loaded,
Archit Taneja
- [PATCH 3/7] v4l: ti-vpe: Use video_device_release_empty,
Archit Taneja
- [PATCH 4/7] v4l: ti-vpe: Allow DMABUF buffer type support,
Archit Taneja
- [PATCH 5/7] v4l: ti-vpe: Allow usage of smaller images,
Archit Taneja
- [PATCH 6/7] v4l: ti-vpe: Fix some params in VPE data descriptors,
Archit Taneja
- [PATCH 7/7] v4l: ti-vpe: Add crop support in VPE driver,
Archit Taneja
- [PATCH v2 0/7] v4l: ti-vpe: Some VPE fixes and enhancements,
Archit Taneja
- [PATCH v2 2/7] v4l: ti-vpe: register video device only when firmware is loaded,
Archit Taneja
- [PATCH v2 4/7] v4l: ti-vpe: Allow DMABUF buffer type support,
Archit Taneja
- [PATCH v2 7/7] v4l: ti-vpe: Add selection API in VPE driver,
Archit Taneja
- [PATCH v2 5/7] v4l: ti-vpe: Allow usage of smaller images,
Archit Taneja
- [PATCH v2 6/7] v4l: ti-vpe: Fix some params in VPE data descriptors,
Archit Taneja
- [PATCH v2 3/7] v4l: ti-vpe: Use video_device_release_empty,
Archit Taneja
- [PATCH v2 1/7] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs,
Archit Taneja
- [PATCH v3 00/14] v4l: ti-vpe: Some VPE fixes and enhancements,
Archit Taneja
- [PATCH v3 01/14] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs,
Archit Taneja
- [PATCH v3 02/14] v4l: ti-vpe: register video device only when firmware is loaded,
Archit Taneja
- [PATCH v3 04/14] v4l: ti-vpe: Allow DMABUF buffer type support,
Archit Taneja
- [PATCH v3 05/14] v4l: ti-vpe: Allow usage of smaller images,
Archit Taneja
- [PATCH v3 10/14] v4l: ti-vpe: Use correct bus_info name for the device in querycap,
Archit Taneja
- [PATCH v3 11/14] v4l: ti-vpe: Fix initial configuration queue data,
Archit Taneja
- [PATCH v3 14/14] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers,
Archit Taneja
- [PATCH v3 13/14] v4l: ti-vpe: Set correct field parameter for output and capture buffers,
Archit Taneja
- [PATCH v3 09/14] v4l: ti-vpe: report correct capabilities in querycap,
Archit Taneja
- [PATCH v3 12/14] v4l: ti-vpe: zero out reserved fields in try_fmt,
Archit Taneja
- [PATCH v3 07/14] v4l: ti-vpe: Add selection API in VPE driver,
Archit Taneja
- [PATCH v3 08/14] v4l: ti-vpe: Rename csc memory resource name,
Archit Taneja
- [PATCH v3 06/14] v4l: ti-vpe: Fix some params in VPE data descriptors,
Archit Taneja
- [PATCH v3 03/14] v4l: ti-vpe: Use video_device_release_empty,
Archit Taneja
- [PATCH v4 00/14] v4l: ti-vpe: Some VPE fixes and enhancements,
Archit Taneja
- [PATCH v4 01/14] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs,
Archit Taneja
- [PATCH v4 03/14] v4l: ti-vpe: Use video_device_release_empty,
Archit Taneja
- [PATCH v4 06/14] v4l: ti-vpe: Fix some params in VPE data descriptors,
Archit Taneja
- [PATCH v4 07/14] v4l: ti-vpe: Add selection API in VPE driver,
Archit Taneja
- [PATCH v4 09/14] v4l: ti-vpe: report correct capabilities in querycap,
Archit Taneja
- [PATCH v4 10/14] v4l: ti-vpe: Use correct bus_info name for the device in querycap,
Archit Taneja
- [PATCH v4 12/14] v4l: ti-vpe: zero out reserved fields in try_fmt,
Archit Taneja
- [PATCH v4 13/14] v4l: ti-vpe: Set correct field parameter for output and capture buffers,
Archit Taneja
- [PATCH v4 14/14] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers,
Archit Taneja
- [PATCH v4 08/14] v4l: ti-vpe: Rename csc memory resource name,
Archit Taneja
- [PATCH v4 11/14] v4l: ti-vpe: Fix initial configuration queue data,
Archit Taneja
- [PATCH v4 04/14] v4l: ti-vpe: Allow DMABUF buffer type support,
Archit Taneja
- [PATCH v4 02/14] v4l: ti-vpe: register video device only when firmware is loaded,
Archit Taneja
- [PATCH v4 05/14] v4l: ti-vpe: Allow usage of smaller images,
Archit Taneja
Re: [GIT PULL 3/4] omap device tree changes for v3.15,
Tony Lindgren
[GIT PULL] two omap dt regression fixes for v3.14-rc4,
Tony Lindgren
[GIT PULL] ARM: OMAP: Device Tree for 3.15,
Benoit Cousson
[PATCH] sound: omap: n810: fix init with DT boot,
Aaro Koskinen
[PATCH v2 0/7] ARM: dts: omap3-gta04: Various devicetree updates,
Marek Belisko
[PATCHv2 0/4] OMAP IOMMU DTS nodes,
Suman Anna
[PATCHv3 00/13] OMAP IOMMU DT adaptation for 3.15,
Suman Anna
- [PATCHv3 01/13] iommu/omap: convert to devm_* interfaces,
Suman Anna
- [PATCHv3 02/13] iommu/omap: fix error return paths in omap_iommu_attach(),
Suman Anna
- [PATCHv3 03/13] iommu/omap: allow enable/disable even without pdata,
Suman Anna
- [PATCHv3 04/13] Documentation: dt: add OMAP iommu bindings,
Suman Anna
- [PATCHv3 05/13] iommu/omap: add devicetree support,
Suman Anna
- [PATCHv3 06/13] iommu/omap: enable bus-error back on supported iommus,
Suman Anna
- [PATCHv3 08/13] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2,
Suman Anna
- [PATCHv3 07/13] iommu/omap: allocate archdata on the fly for DT-based devices,
Suman Anna
- [PATCHv3 09/13] ARM: OMAP3: fix iva mmu programming issues,
Suman Anna
- [PATCHv3 10/13] ARM: OMAP2+: change the ISP device archdata MMU name for DT,
Suman Anna
- [PATCHv3 12/13] ARM: OMAP5: hwmod data: add mmu data for ipu & dsp,
Suman Anna
- [PATCHv3 11/13] ARM: OMAP2+: use pdata quirks for iommu reset lines,
Suman Anna
- [PATCHv3 13/13] ARM: OMAP2+: extend iommu pdata-quirks to OMAP5,
Suman Anna
- Re: [PATCHv3 00/13] OMAP IOMMU DT adaptation for 3.15,
Tony Lindgren
[GIT PULL] ARM: OMAP2+: PRCM/hwmod/clock non-regression fixes and optimizations for v3.15,
Paul Walmsley
[pandaboard] OTG port not working (updated),
Tobias Jakobi
[PATCH 0/2] mmc: omap_hsmmc: checkpatch cleanup,
Balaji T K
[PATCH 00/12] ARM: OMAP2 DT clock conversion,
Tero Kristo
- [PATCH 04/12] CLK: TI: DPLL: add support for omap2 core dpll,
Tero Kristo
- [PATCH 03/12] CLK: TI: DPLL: simplify autoidle register detection logic,
Tero Kristo
- [PATCH 02/12] ARM: OMAP2420: clock: get rid of fixed-div property use,
Tero Kristo
- [PATCH 01/12] ARM: OMAP2: convert sys_ck and osc_ck to standard clock types,
Tero Kristo
- [PATCH 07/12] CLK: TI: interface: add support for omap2430 specific interface clock,
Tero Kristo
- [PATCH 06/12] CLK: TI: gate: fixed DT binding documentation bugs,
Tero Kristo
- [PATCH 10/12] ARM: OMAP2: clock: add DT boot support for cpufreq_ck,
Tero Kristo
- [PATCH 11/12] ARM: OMAP2: PRM: add support for OMAP2 specific clock providers,
Tero Kristo
- [PATCH 09/12] ARM: dts: omap2 clock data,
Tero Kristo
- [PATCH 12/12] ARM: OMAP2: clock: use DT clock boot if available,
Tero Kristo
- [PATCH 08/12] CLK: TI: OMAP2: add clock init support,
Tero Kristo
- [PATCH 05/12] CLK: TI: APLL: add support for omap2 aplls,
Tero Kristo
- Re: [PATCH 00/12] ARM: OMAP2 DT clock conversion,
Nishanth Menon
[PATCH] ARM: dts: am335x-evmsk: enable USB1,
yegorslists
[GIT PULL] omap fixes for v3.14-rc4,
Tony Lindgren
USB hub disconnected at resume ???,
Marc Murphy
[PATCH] ARM: OMAP3: Fix pinctrl interrupts for core2,
Tony Lindgren
[PATCH v2 0/8] ARM: dts: Better support for Gumstix Overo,
Florian Vaussard
[PATCH v9 0/9] USB Host support for OMAP5 uEVM,
Roger Quadros
- [PATCH v9 1/9] mfd: omap-usb-host: Get clocks based on hardware revision,
Roger Quadros
- [PATCH v9 9/9] usb: omap: dts: Update DT binding example usage,
Roger Quadros
- [PATCH v9 8/9] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes,
Roger Quadros
- [PATCH v9 6/9] mfd: omap-usb-tll: Update DT clock binding information,
Roger Quadros
- [PATCH v9 7/9] ARM: OMAP2+: Remove legacy_init_ehci_clk(),
Roger Quadros
- [PATCH v9 5/9] mfd: omap-usb-host: Update DT clock binding information,
Roger Quadros
- [PATCH v9 4/9] mfd: omap-usb-host: Use clock names as per function for reference clocks,
Roger Quadros
- [PATCH v9 2/9] mfd: omap-usb-host: Always fail on clk_get() error,
Roger Quadros
- [PATCH v9 3/9] mfd: omap-usb-host: Use proper clock name instead of alias,
Roger Quadros
- Re: [PATCH v9 0/9] USB Host support for OMAP5 uEVM,
Tony Lindgren
- Re: [PATCH v9 0/9] USB Host support for OMAP5 uEVM,
Roger Quadros
[PATCH 0/3] mfd: twl6040: Updates for i2s speed and fix for chip deadlock,
Peter Ujfalusi
Help running latest linux-omap kernel on Nokia N810,
Leigh Brown
[PATCH v3 0/2] ARM: OMAP4+: Fix gpmc_fck clock,
Florian Vaussard
[PATCH RFC 0/5] AM43xx-ePOS-EVM audio support with TLV320AIC31XX driver,
Jyri Sarha
SD card timeout problems on Nokia N900 (omap_hsmmc on OMAP3),
Sebastian Reichel
[PATCH 0/2] mfd: twl6040: Small clean-ups,
Florian Vaussard
[PATCH v7 0/4] mmc: omap_hsmmc: SDIO IRQ.,
Andreas Fenkart
TWL6040 fails to initialize,
Florian Vaussard
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]
