Use the timings provided by omap-gpmc-smsc9221. This does not change
the timings, but it avoids code duplication.
Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx>
---
arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 30 +++-----------------------
1 file changed, 3 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index da7d85b..caddb8c 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -44,39 +44,15 @@
};
};
+#include "omap-gpmc-smsc9221.dtsi"
+
&gpmc {
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
- ethernet@5,0 {
- compatible = "smsc,lan9221", "smsc,lan9115";
+ ethernet@gpmc {
reg = <5 0 0xff>;
- bank-width = <2>;
-
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <42>;
- gpmc,cs-wr-off-ns = <36>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <12>;
- gpmc,adv-wr-off-ns = <12>;
- gpmc,oe-on-ns = <0>;
- gpmc,oe-off-ns = <42>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <36>;
- gpmc,rd-cycle-ns = <60>;
- gpmc,wr-cycle-ns = <54>;
- gpmc,access-ns = <36>;
- gpmc,page-burst-access-ns = <0>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <18>;
- gpmc,wr-access-ns = <42>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
-
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
- reg-io-width = <4>;
};
};
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
