Re: [PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Felipe,

On Thursday 06 March 2014 08:08 PM, Roger Quadros wrote:
The dra7-usb2 and am437-usb2 bindings have not yet been used.
Change them to be more elegant.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
  Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++--

Here too..
Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>

Regards
Kishon
  drivers/phy/phy-omap-control.c                   | 4 ++--
  2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 5c5b1b0..28e674b 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -9,9 +9,9 @@ Required properties:
                          e.g. USB2_PHY on OMAP5.
   "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
                          e.g. USB3 PHY and SATA PHY on OMAP5.
- "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
+ "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on
                          DRA7 platform.
- "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
+ "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on
                          AM437 platform.
   - reg : Address and length of the register set for the device. It contains
     the address of "otghs_control" for control-phy-otghs or "power" register
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
index 17fc200..a7e2d7f 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c
@@ -228,11 +228,11 @@ static const struct of_device_id omap_control_phy_id_table[] = {
  		.data = &pipe3_data,
  	},
  	{
-		.compatible = "ti,control-phy-dra7usb2",
+		.compatible = "ti,control-phy-dra7-usb2",
  		.data = &dra7usb2_data,
  	},
  	{
-		.compatible = "ti,control-phy-am437usb2",
+		.compatible = "ti,control-phy-am437-usb2",
  		.data = &am437usb2_data,
  	},
  	{},

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux