Hi Lee, On 02/27/2014 04:18 PM, Roger Quadros wrote: > Hi, > > This patchset brings up USB Host ports and Ethernet port on > the OMAP5 uEVM board. > > It also does some cleanup with respect to DT clock binding > for the mfd/omap-usb-host driver. > > Please queue these for -next. > > Lee, > > I've folded some platform data dependent patches with mfd patches > so that they don't break functionality when applied individually. > You can safely pull in all MFD patches (1 to 6). > > Tony & Benoit, > > Can you please accept patches 7, 8 and 9? Tony has already picked up 7,8 and 9 through omap-soc tree. Since you acked most patches except 5 and 6, are you fine if Tony takes all the patches 1 to 4 in this series via omap-soc tree? What about patches 5 and 6? cheers, -roger > > Thanks. > > Tested on: > - OMAP5 uEVM > - Pandaboard ES Rev. B1 > - Beagleboard-XM Rev C2 (DT + Legacy) > - Beagleboard Rev C4 (DT + Legacy) > > Changelog: > > v9: > - Folded dependent platform data patches into MFD patches. > > v8: > - Addressed review comments and split patch > "mfd: omap-usb-host: Get clocks based on hardware revision" > - Removed unnecessary usb host dummy clocks on OMAP3 > - Removed unnecessary clock alias "ehci_logic_fck" for OMAP3 > - Rebased on 3.14-rc3 > > v7: > - Rebased on 3.14-rc2 > - Removed incompatible ids from DT files and examples > > v6: > - Initialized clocks to -ENODEV and split patch 3. > > v5: > - Expose all clocks in the DT binding document for mfd:omap-usb-host > and mfd:omap-usb-tll > > v4: > - Updated DT binding document for clock binding > > v3: > - Rebased on top of 3.13-rc7 > > cheers, > -roger > > --- > Roger Quadros (9): > mfd: omap-usb-host: Get clocks based on hardware revision > mfd: omap-usb-host: Always fail on clk_get() error > mfd: omap-usb-host: Use proper clock name instead of alias > mfd: omap-usb-host: Use clock names as per function for reference > clocks > mfd: omap-usb-host: Update DT clock binding information > mfd: omap-usb-tll: Update DT clock binding information > ARM: OMAP2+: Remove legacy_init_ehci_clk() > ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes > usb: omap: dts: Update DT binding example usage > > .../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++ > .../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++ > .../devicetree/bindings/usb/ehci-omap.txt | 2 +- > .../devicetree/bindings/usb/ohci-omap3.txt | 2 +- > arch/arm/boot/dts/omap3.dtsi | 4 +- > arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +- > arch/arm/boot/dts/omap4.dtsi | 10 +- > arch/arm/boot/dts/omap5-uevm.dts | 8 +- > arch/arm/boot/dts/omap5.dtsi | 10 +- > arch/arm/mach-omap2/cclock3xxx_data.c | 4 - > arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 -- > arch/arm/mach-omap2/pdata-quirks.c | 16 --- > drivers/clk/ti/clk-3xxx.c | 4 - > drivers/mfd/omap-usb-host.c | 116 ++++++++++++++------- > 14 files changed, 135 insertions(+), 88 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
