The vpe driver wasn't setting the correct field parameter for dequed CAPTURE type buffers for the case where the captured output is progressive. Set the field to V4L2_FIELD_NONE for the completed destination buffers when the captured output is progressive. For OUTPUT type buffers, a queued buffer's field is forced to V4L2_FIELD_NONE if the pixel format(configured through s_fmt for the buffer type V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE specifies) the field type isn't interlaced. If the pixel format specified was V4L2_FIELD_ALTERNATE, and the queued buffer's field isn't V4L2_FIELD_TOP or V4L2_FIELD_BOTTOM, the vb2 buf_prepare op returns an error. This ensures compliance, and that the dequeued output and captured buffers contain the field type that the driver used internally. Signed-off-by: Archit Taneja <archit@xxxxxx> --- drivers/media/platform/ti-vpe/vpe.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index c0ae847..362d5be 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -1296,10 +1296,10 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data) d_buf->timecode = s_buf->timecode; } d_buf->sequence = ctx->sequence; - d_buf->field = ctx->field; d_q_data = &ctx->q_data[Q_DATA_DST]; if (d_q_data->flags & Q_DATA_INTERLACED) { + d_buf->field = ctx->field; if (ctx->field == V4L2_FIELD_BOTTOM) { ctx->sequence++; ctx->field = V4L2_FIELD_TOP; @@ -1308,6 +1308,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data) ctx->field = V4L2_FIELD_BOTTOM; } } else { + d_buf->field = V4L2_FIELD_NONE; ctx->sequence++; } @@ -1880,6 +1881,16 @@ static int vpe_buf_prepare(struct vb2_buffer *vb) q_data = get_q_data(ctx, vb->vb2_queue->type); num_planes = q_data->fmt->coplanar ? 2 : 1; + if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + if (!(q_data->flags & Q_DATA_INTERLACED)) { + vb->v4l2_buf.field = V4L2_FIELD_NONE; + } else { + if (vb->v4l2_buf.field != V4L2_FIELD_TOP && + vb->v4l2_buf.field != V4L2_FIELD_BOTTOM) + return -EINVAL; + } + } + for (i = 0; i < num_planes; i++) { if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) { vpe_err(ctx->dev, -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html