Due to Errata i783, SATA breaks if its DPLL is idled. The recommeded workaround to issue a softreset to the SATA controller doesn't seem to work. Here we just prevent SATA DPLL from Idling and hence avoid the issue altogether. Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- drivers/phy/phy-ti-pipe3.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 12cc900..5913676 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -238,6 +238,10 @@ static int ti_pipe3_exit(struct phy *x) u32 val; unsigned long timeout; + /* SATA DPLL can't be powered down due to Errata i783 */ + if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) + return 0; + /* Put DPLL in IDLE mode */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val |= PLL_IDLE; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
