Hi Tony & Felipe, Kishon has pulled in the relevant PHY patches into his tree. These are the remaining patches from the series. Patches 1 to 3 need to go through Felipe's USB tree. Patches 4 to 8 need to go through Tony's OMAP tree. Thanks. Patches are based on 3.14-rc4 with balbi/next, linux-phy/next and omap-for-v3.15/dt merged on top. To test SATA you will also need [1]. [1] - http://article.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/7285 Changelog: v3 - Removed PHY patches and rebased. v2 - use 'depends on' instead of 'select' OCP2SCP bus driver. - Changed DT bindings for dra7-usb2 and am437-usb2 phy. cheers, -roger --- Balaji T K (2): ARM: dts: omap5: add sata node ARM: dts: dra7: add OCP2SCP3 and SATA nodes Keshava Munegowda (1): ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods Nikhil Devshatwar (1): ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods Roger Quadros (4): phy: omap-control: update dra7 and am437 usb2 Documentation bindings phy: ti-pipe3: Add clocks to PIPE3 PHY Documentation binding phy: ti-pipe3: Add SATA compatible to Documentation binding ARM: dts: omap5: Add clocks to USB3 PHY node Documentation/devicetree/bindings/phy/ti-phy.txt | 19 +++++- arch/arm/boot/dts/dra7.dtsi | 39 +++++++++++++ arch/arm/boot/dts/omap5.dtsi | 46 +++++++++++++++ arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 ++++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 31 ++++++++-- 5 files changed, 200 insertions(+), 8 deletions(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
