From: Balaji T K <balajitk@xxxxxx>
Add nodes for OCP2SCP3 bus, SATA controller and SATA PHY.
[Roger Q] Clean up.
CC: Benoit Cousson <bcousson@xxxxxxxxxxxx>
Signed-off-by: Balaji T K <balajitk@xxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
arch/arm/boot/dts/dra7.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1fd75aa..74e44bc 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -621,6 +621,45 @@
dma-names = "tx0", "rx0";
status = "disabled";
};
+
+ omap_control_sata: control-phy@4a002374 {
+ compatible = "ti,control-phy-pipe3";
+ reg = <0x4a002374 0x4>;
+ reg-names = "power";
+ clocks = <&sys_clkin1>;
+ clock-names = "sysclk";
+ };
+
+ /* OCP2SCP3 */
+ ocp2scp@4a090000 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x4a090000 0x20>;
+ ti,hwmods = "ocp2scp3";
+ sata_phy: phy@4A096000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x4A096000 0x80>, /* phy_rx */
+ <0x4A096400 0x64>, /* phy_tx */
+ <0x4A096800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_sata>;
+ clocks = <&sys_clkin1>;
+ clock-names = "sysclk";
+ #phy-cells = <0>;
+ };
+ };
+
+ sata: sata@4a141100 {
+ compatible = "snps,dwc-ahci";
+ reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&sata_ref_clk>;
+ ti,hwmods = "sata";
+ };
};
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
