On 03/07/2014 12:50 PM, Archit Taneja wrote: > Hi Hans, > > On Tuesday 04 March 2014 05:05 PM, Hans Verkuil wrote: >> On 03/04/14 12:25, Archit Taneja wrote: >>> I had a minor question about the selection API: >>> >>> Are the V4L2_SET_TGT_CROP/COMPOSE_DEFAULT and the corresponding >>> 'BOUNDS' targets supposed to be used with VIDIOC_S_SELECTION? If so, >>> what's the expect behaviour? >> >> No, those are read only in practice. So only used with G_SELECTION, never >> with S_SELECTION. > > <snip> > > I tried the v4l2-compliance thing. It's awesome! And a bit annoying too > when it comes to fixing little things needed for compliance :). But it's > required, and I hope to fix these eventually. > > After a few small fixes in the driver, I get the results as below. I am > debugging the cause of try_fmt and s_fmt failures. I'm not sure why the > streaming test fails with MMAP, the logs of my driver show that a > successful mem2mem transaction happened. > > I tried this on the 'vb2-part1' branch as you suggested. > > Do you think I can go ahead with posting the v3 patch set for 3.15, and > work on fixing the compliance issue for the -rc fixes? It's fine to upstream this in staging, but while not all compliance errors are fixed it can't go to drivers/media. I'm tightening the screws on that since v4l2-compliance is getting to be such a powerful tool for ensuring the driver complies. > > Thanks, > Archit > > # ./utils/v4l2-compliance/v4l2-compliance -v --streaming=10 > root@localhost:~/source_trees/v4l-utils# Driver Info: > Driver name : vpe > Card type : vpe > Bus info : platform:vpe > Driver version: 3.14.0 > Capabilities : 0x84004000 > Video Memory-to-Memory Multiplanar > Streaming > Device Capabilities > Device Caps : 0x04004000 > Video Memory-to-Memory Multiplanar > Streaming > > Compliance test for device /dev/video0 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Control ioctls: > info: checking v4l2_queryctrl of control 'User > Controls' (0x00980001) > info: checking v4l2_queryctrl of control 'Buffers Per > Transaction' (0x00981950) > info: checking v4l2_queryctrl of control 'Buffers Per > Transaction' (0x08000000) > test VIDIOC_QUERYCTRL/MENU: OK > info: checking control 'User Controls' (0x00980001) > info: checking control 'Buffers Per Transaction' > (0x00981950) > test VIDIOC_G/S_CTRL: OK > info: checking extended control 'User Controls' > (0x00980001) > info: checking extended control 'Buffers Per > Transaction' (0x00981950) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > info: checking control event 'User Controls' (0x00980001) > info: checking control event 'Buffers Per Transaction' > (0x00981950) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 1 Private Controls: 1 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > Format ioctls: > info: found 8 formats for buftype 9 > info: found 4 formats for buftype 10 > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > fail: v4l2-test-formats.cpp(614): Video Capture > Multiplanar: TRY_FMT(G_FMT) != G_FMT > test VIDIOC_TRY_FMT: FAIL > warn: v4l2-test-formats.cpp(834): S_FMT cannot handle > an invalid pixelformat. > warn: v4l2-test-formats.cpp(835): This may or may not > be a problem. For more information see: > warn: v4l2-test-formats.cpp(836): > http://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg56550.html > fail: v4l2-test-formats.cpp(420): pix_mp.reserved not > zeroed This is easy enough to fix. > fail: v4l2-test-formats.cpp(851): Video Capture > Multiplanar is valid, but no S_FMT was implemented For the FMT things: run with -T: that gives nice traces. You can also set the debug flag: echo 2 >/sys/class/video4linux/video0/debug to see all ioctls in more detail. > test VIDIOC_S_FMT: FAIL > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > info: test buftype Video Capture Multiplanar > warn: v4l2-test-buffers.cpp(403): VIDIOC_CREATE_BUFS > not supported > info: test buftype Video Output Multiplanar > warn: v4l2-test-buffers.cpp(403): VIDIOC_CREATE_BUFS > not supported > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK (Not Supported) > test read/write: OK (Not Supported) > Video Capture Multiplanar (polling): > Buffer: 0 Sequence: 0 Field: Top Timestamp: 113.178208s > fail: v4l2-test-buffers.cpp(222): buf.field != > cur_fmt.fmt.pix.field Definitely needs to be fixed, you probably just don't set the field at all. > fail: v4l2-test-buffers.cpp(630): checkQueryBuf(node, > buf, bufs.type, bufs.memory, buf.index, Dequeued, last_seq) > fail: v4l2-test-buffers.cpp(1038): captureBufs(node, > bufs, m2m_bufs, frame_count, true) > test MMAP: FAIL > test USERPTR: OK (Not Supported) > test DMABUF: Cannot test, specify --expbuf-device > > Total: 40, Succeeded: 37, Failed: 3, Warnings: 5 > > [1]+ Exit 1 ./utils/v4l2-compliance/v4l2-compliance -v > --streaming=10 Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
