Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v2 4/5] mtd: nand: omap2: Use devm_kzalloc
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/5] mtd: nand: omap2: Fix OMAP_BCH option dependency
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/5] mtd: nand: omap2: Fix device detection path
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/5] ARM: am335x-bone: Add support for 16-bit NAND cape
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/5] Assorted OMAP2 NAND clean-ups
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: OMAP2: omap4-sdp: remove unneeded gpios from dss-common
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/3] ARM: dts: omap4-sdp: add LCD pinmuxing
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/3] ARM: dts: omap4-panda: add DPI pinmuxing
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH] twl4030_charger: add devicetree support.
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] mtd: nand: omap2: Use devm_kzalloc
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 04/10] mtd: nand: omap: use DT specified bus-width only for scanning NAND device
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 04/10] mtd: nand: omap: use DT specified bus-width only for scanning NAND device
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 4/5] mtd: nand: omap2: Use devm_kzalloc
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [PATCH 5/5] mtd: nand: omap2: Use devm_ioremap_resource
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/5] mtd: nand: omap2: Use devm_kzalloc
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] mtd: nand: omap2: Fix OMAP_BCH option dependency
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: am335x-bone: Add support for 16-bit NAND cape
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] mtd: nand: omap2: Fix device detection path
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] Assorted OMAP2 NAND clean-ups
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 04/10] mtd: nand: omap: use DT specified bus-width only for scanning NAND device
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• RE: [PATCH 0/2] ARM: OMAP: dmtimers improvements.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/3] dma: edma: Add support for Cyclic DMA
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH 2/3] dma: edma: Add support for Cyclic DMA
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: clock fixes for v3.13
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP3: fix dpll4_m3_ck and dpll4_m4_ck dividers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP3: use CLK_SET_RATE_PARENT for dss clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH 2/6] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2] serial: omap: Add support for optional wake-up
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH v11 08/10] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 09/10] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 07/10] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 05/10] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 06/10] mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 03/10] mtd: nand: omap: cleanup: replace local references with generic framework names
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 04/10] mtd: nand: omap: use DT specified bus-width only for scanning NAND device
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 02/10] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v11 01/10] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [RFC PATCH 2/6] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH] twl4030_charger: add devicetree support.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v2] serial: omap: Add support for optional wake-up
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [RFC PATCH 2/6] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH] twl4030_charger: add devicetree support.
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH] twl4030_charger: add devicetree support.
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/6] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/6] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC PATCH 0/6] DRIVERS: IRQCHIP: Add support for crossbar IP
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFCv3 0/7] OMAP SSI driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC PATCH 00/11] Embeddable Position Independent Executable
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP4: use CLK_SET_RATE_PARENT for dss_dss_clk
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/2] ARM: OMAP: dmtimers improvements.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 1/2] ARM: OMAP2+: dmtimer: allow counter to be set at any time.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 2/2] ARM: OMAP: move dmtimer.h from plat-omap/include/plat to include/linux
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH/RFC] pwm: omap: Add PWM support using dual-mode timers
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] twl4030_charger: add devicetree support.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v6 2/4] ASoC: davinci-evm: Add device tree binding
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 3/4] ASoC: davinci-mcasp: Remove last reference to num-serializer in DT doc
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 1/4] ASoC: davinci: Add support for AM33xx SoC Audio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [GIT PULL 1/4] omap late not urgent fixes part 2 for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 00/11] Embeddable Position Independent Executable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH v10 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH v10 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH v6 2/4] ASoC: davinci-evm: Add device tree binding
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 3/4] ASoC: davinci-mcasp: Remove last reference to num-serializer in DT doc
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 4/4] arm: omap2plus_defconfig: enable AM33xx SOC EVM audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 0/4] Fix AM335x-evm analog audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v6 1/4] ASoC: davinci: Add support for AM33xx SoC Audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v5 07/12] ASoC: davinci-mcasp: Remove redundant num-serializer DT parameter
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 06/12] ASoC: davinci-mcasp: Improve DT bindings document
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: Some more more Device Tree for 3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] Revert "ARM: OMAP2+: Provide alias to USB PHY clock"
  • From: Roger Quadros <rogerq@xxxxxx>
• [GIT PULL] ARM: OMAP: Some more more Device Tree for 3.13
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: omap5-uevm: Audio related fixes
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH 0/2] ARM: dts: omap5-uevm: Audio related fixes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/2] ARM: dts: omap5-uevm: Correct twl6040 reset GPIO pinmux
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/2] ARM: dts: omap5-uevm: Remove pinmux for dmic pins
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 00/14] DTS: ARM: OMAP3-N900: Add misc. HW
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• RE: [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• RE: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH] ARM: OMAP: devicetree: fix SPI node compatible property syntax items
  • From: Eric Witcher <ewitcher@xxxxxxxxxxxxxx>
• OMAP baseline test results for v3.12-rc6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/14] DTS: ARM: OMAP3-N900: Add pinctrl for i2c devices
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 03/14] DTS: ARM: OMAP3-N900: Add UART support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 02/14] DTS: ARM: OMAP3-N900: Fix i2c bus speed
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 06/14] DTS: ARM: OMAP3-N900: Add vibrator device
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 05/14] DTS: ARM: OMAP3-N900: GPIO key definitions
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 00/14] DTS: ARM: OMAP3-N900: Add misc. HW
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 08/14] DTS: TWL4030: Add missing regulators
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 04/14] DTS: ARM: OMAP3-N900: Add support for SD cards
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 14/14] DTS: TWL4030: Add power button support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 09/14] DTS: ARM: OMAP3-N900: Specify regulator info
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 12/14] DTS: ARM: OMAP3-N900: Add TLV320AIC3X support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 13/14] DTS: ARM: OMAP3-N900: Add LP5523 support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 10/14] DTS: ARM: OMAP3-N900: Add NAND support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 11/14] DTS: ARM: OMAP3-N900: Mux RX51_LCD_RESET_GPIO in DTS
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 07/14] DTS: ARM: OMAP3-N900: Add LP5523 support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/4] power: isp1704_charger: Fix driver to work with changes introduced in v3.5
  • From: Anton Vorontsov <anton@xxxxxxxxxx>
• Re: [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v9 7/9] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [PATCH v2] ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] DTS: ARM: OMAP3-N900: Add LP5523 support
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: OMAP3-N900: Add LP5523 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Bryan Wu <cooloney@xxxxxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 02/12] ASoC: davinci-evm: Add device tree binding
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH V7 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v6 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DW PHY's
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 2/3] dma: edma: Add support for Cyclic DMA
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v2 5/6] Revert "ARM: OMAP2+: Provide alias to USB PHY clock"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V7 3/8] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2: irq, AM33XX add missing register check
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-uevm: fix mcspi node pin descriptions
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v6 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DW PHY's
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: wakeupgen: AM43x adaptation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33xx, change usb ctrl module label
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: wakeupgen: AM43x adaptation
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH 1/4] Input: twl4030-pwrbutton - add device tree support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] serial: omap: Add support for optional wake-up
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] Add support for Newflow NanoBone board
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v5 01/12] ASoC: davinci: Fix AM33xx SoC Audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH 0/2] Add lp5523 DT support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/2] DTS: ARM: OMAP3-N900: Add LP5523 support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/2] leds: lp55xx: handle enable pin in driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: Some more Device Tree for 3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] Input: twl4030-pwrbutton: simplify driver using devm_*
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 0/4] Add N900 powerbutton DT support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 4/4] ARM: dts: twl4030: Add power button support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/4] Input: twl4030-pwrbutton - add device tree support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/2] Documentation: DTS: bq27xxx are trivial i2c devices
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/2] DTS: ARM: OMAP3-N900: Add bq27200 battery monitor
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/4] Input: twl4030-pwrbutton: use dev_err for errors
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] DTS: ARM: OMAP3-N900: Add vibrator device
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] ARM: dts: N900: GPIO key definitions
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [RFCv3 7/7] ARM: dts: N900: Add SSI information
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCHv2 2/3] DTS: ARM: TWL4030: Add keypad node
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 0/3] Add Nokia N900 DT support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 1/3] Input: twl4030-keypad - add device tree support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 3/3] ARM: dts: N900: TWL4030 Keypad Matrix definition
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v5 02/12] ASoC: davinci-evm: Add device tree binding
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 04/12] ASoC: davinci-mcasp: Extract DMA channels directly from DT
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 02/12] ASoC: davinci-evm: Add device tree binding
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH v5 01/12] ASoC: davinci: Fix AM33xx SoC Audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 05/12] ASoC: davinci-mcasp: Change compatible property model to more accurate
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] input: touchscreen: fix spelling mistake in TSC/ADC DT binding
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] DTS: ARM: OMAP3-N900: Add support for SD cards
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] DTS: ARM: OMAP3-N900: Add UART support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v5 03/12] ASoC: davinci-mcasp: Add location for data port registers to DT
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] DTS: ARM: OMAP3-N900: Fix i2c bus speed
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v5 02/12] ASoC: davinci-evm: Add device tree binding
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] DTS: ARM: OMAP3-N900: Add pinctrl for i2c devices
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [GIT PULL] ARM: OMAP: Some more Device Tree for 3.13
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH 3/4] dma: cppi41: redo descriptor collection in abort case
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• cppi41: pending patches
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/4] dma: cppi41: restore more registers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 4/4] dma: cppi41: return code > 0 of pm_runtime_get_sync() is not an error
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/4] dma: cppi41: use cppi41_pop_desc() where possible
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] typo fixes (coordiante -> coordinate) in am335x
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: igep0033: Add mmc1 node for SDCARD support.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH] ARM: dts: igep0033: Add mmc1 node for SDCARD support.
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 1/2] input: touchscreen: fix spelling mistake in TSC/ADC DT binding
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am4372: Add McASP nodes
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am4372: Add McASP nodes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 02/11] ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [net PATCH 1/1] drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH 2/2] arm: dts: am335x sk: add touchscreen support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] input: touchscreen: fix spelling mistake in TSC/ADC DT binding
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/2] arm: am335x: am335x evm sk: add touchscreen DT node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: dts: am4372: Add McASP nodes
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 02/11] ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 02/11] ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 02/11] ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: omap5: Add dr_mode for dwc3
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] ARM: dts: am4372: Add McASP nodes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 0/2] drm: omap: Fix omapdrm probe and module insertion/removal issues
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFCv3 0/7] OMAP SSI driver
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH V2 0/2] ARM: dts: OMAP2+: add i2c aliases
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/3] dma: edma: Increase maximum SG limit to 20
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/3] dma: edma: Split out PaRAM set calculations into its own function
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/3] dma: edma: Add support for Cyclic DMA
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH] ARM: dts: omap5-uevm: fix mcspi node pin descriptions
  • From: Eric Witcher <ewitcher@xxxxxxxxxxxxxx>
• [PATCH 5/5] mmc: omap_hsmmc: remove unused no_off
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 4/5] mmc: omap_hsmmc: correct max value of clkd
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 3/5] mmc: omap_hsmmc: fix timeout for cmd and data soft reset
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/5] mmc: omap_hsmmc: context save and restore for DT
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 1/5] mmc: omap_hsmmc: Fix pbias_disable for omap4
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 3/6] ARM: dts: am335x-boneblack: mark eMMC as non removable
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 6/6] ARM: dts: omap4-var-som: fix bus-width
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 4/6] ARM: dts: dra7-evm: mark eMMC as non removable
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 5/6] ARM: dts: am335x-boneblack: remove unused ti,vcc-aux-disable-is-sleep
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 1/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 2/6] ARM: dts: OMAP4/5: start using generic binding for non-removable mmc cards
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v2 0/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v5 DTS 0/4] Fix AM335x-evm analog audio support
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH v5 DTS 4/4] ARM/dts: am335x-evmsk: Audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 DTS 2/4] ARM/dts: am33xx: mcasp: Add location for data port registers to reg-property
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 DTS 3/4] ARM/dts: am335x-evm: Add audio support for am335x-evm.dts
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 DTS 1/4] ARM/dts: am33xx: Add mcasp0 and mcasp1 device tree entries
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 DTS 0/4] Fix AM335x-evm analog audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: CM/SCM: clean up direct register accesses
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: dts: omap3-igep MMC updates for v3.13
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• [net PATCH 1/1] drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 0/3] ARM: dts: omap3-igep MMC updates for v3.13
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: omap3-igep: Fix bus-width for mmc1.
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• [PATCH] ARM: dts: igep0033: Add mmc1 node for SDCARD support.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 1/3] ARM: dts: omap3-igep: Fix bus-width for mmc1.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 3/3] ARM: dts: omap3-igep*: Update to use the TI AM/DM37x processor.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 2/3] ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 0/3] ARM: dts: omap3-igep MMC updates for v3.13
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: OMAP2+: DRA7: hwmod: Add hwmod data for MDIO and CPSW
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 06/11] ARM: OMAP3: CM/PM: add API for forcing IVA2 clk enable/disable
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 07/11] ARM: OMAP3: CM/PM: add new API for checking IVA2 idle status
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 05/11] ARM: OMAP3: CM/PM: add API for accessing module clock enable registers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 11/11] ARM: OMAP2+: CM: move direct register write macros to internal header
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 09/11] ARM: OMAP3: PRM: move iva2 force idle functionality to PRM driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 06/11] ARM: OMAP3: CM/PM: add API for forcing IVA2 clk enable/disable
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 06/11] ARM: OMAP3: CM/PM: add API for forcing IVA2 clk enable/disable
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 08/11] ARM: OMAP3: control: add API for setting IVA bootmode
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 04/11] ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 03/11] ARM: OMAP3: McBSP: do not access CM register directly
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 02/11] ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 01/11] ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: CM/SCM: clean up direct register accesses
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] typo fixes (coordiante -> coordinate) in am335x
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• RE: [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• [PATCH v10 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 09/10] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 08/10] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 07/10] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 05/10] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 06/10] mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 04/10] mtd: nand: omap: fix device scan: NAND_CMD_READID, NAND_CMD_RESET, CMD_CMD_PARAM use only x8 bus
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 03/10] mtd: nand: omap: cleanup: replace local references with generic framework names
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 01/10] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 02/10] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• RE: [PATCH v9 3/9] mtd: nand: omap: cleanup: replace local references with generic framework names
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt on AM335x
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [GIT PULL] urgent omap related x86 pinctrl build fix for v3.13 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• [GIT PULL] urgent omap related x86 pinctrl build fix for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt on AM335x
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 1/3] mmc: core: Support the optional init_card() callback for MMC and SD
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 0/3] Prevent races when doing read-modify-write of INTMASK
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [GIT PULL 1/1] omap board removal for some omap3 boards for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: OMAP2+: remove legacy support for IGEP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/1] omap board removal for some omap3 boards for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap board removal for some omap3 boards for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap board removal for some omap3 boards for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 00/12] Fix AM335x-evm analog audio support
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH] ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v3] ARM: omap: edma: add suspend suspend/resume hooks
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH] ARM: dts: Add missing reg, interrupt and dma entries for omap3
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap board removal for some omap3 boards for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap board removal for some omap3 boards for v3.13 merge window
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• [PATCH v2 1/1] ARM: OMAP2+: remove legacy support for IGEP boards
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v5 06/12] ASoC: davinci-mcasp: Improve DT bindings document
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 02/12] ASoC: davinci-evm: Add device tree binding
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 04/12] ASoC: davinci-mcasp: Extract DMA channels directly from DT
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 12/12] arm: omap2plus_defconfig: enable AM33xx SOC EVM audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 11/12] ARM/dts: am335x-evmsk: Audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 10/12] ARM/dts: am335x-evm: Add audio support for am335x-evm.dts
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 07/12] ASoC: davinci-mcasp: Remove redundant num-serializer DT parameter
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 09/12] ARM/dts: am33xx: mcasp: Add location for data port registers to reg-property
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 08/12] ARM/dts: am33xx: Add mcasp0 and mcasp1 device tree entries
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 03/12] ASoC: davinci-mcasp: Add location for data port registers to DT
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 05/12] ASoC: davinci-mcasp: Change compatible property model to more accurate
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 00/12] Fix AM335x-evm analog audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v5 01/12] ASoC: davinci: Fix AM33xx SoC Audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap board removal for some omap3 boards for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 2/2] omap changes for am43xx hwmod for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH v2 1/1] ARM: OMAP2+: DRA7: hwmod: Add hwmod data for MDIO and CPSW
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [GIT PULL 1/2] omap board removal for some omap3 boards for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 1/1] arm: dra7xx: Add hwmod data for MDIO and CPSW
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH v9 1/9] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 1/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v9 1/9] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH 1/1] ARM: OMAP2+: remove legacy support for IGEP boards
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt on AM335x
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH v3 0/5] usb: musb_dsps: support for suspend and resume
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] usb: musb_dsps: support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v3 4/5] usb: musb: dsps: add support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v3 0/5] usb: musb_dsps: support for suspend and resume
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/5] usb: musb: dsps: add support for suspend and resume
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v3 5/5] usb: musb: dsps: indentation and whitespace fixes
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 4/5] usb: musb: dsps: add support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 3/5] usb: musb: dsps: add {tx,rx}_mode to wrapper
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 2/5] usb: musb: conditionally save and restore the context on suspend
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 1/5] usb: musb: call musb_port_suspend from musb_bus_suspend
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 0/5] usb: musb_dsps: support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH] set data enable logic level to low
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt on AM335x
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt on AM335x
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v2] usb: phy: omap: Add omap-control Support for AM437x
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/2] ARM: dts: AM4372: Add more nodes
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 0/2] ARM: dts: AM4372: Add more nodes
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt on AM335x
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/2] ARM: dts: AM4372: Add more nodes
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH] serial: omap: Add support for optional wake-up interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Add missing reg, interrupt and dma entries for omap3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• RE: [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• RE: [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: omap5: Add dr_mode for dwc3
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [GIT PULL 1/2] omap board removal for some omap3 boards for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2: add AM43xx hwmod and PRCM support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] ARM: OMAP4460: cpuidle: WA for ROM bug because of CA9 r2pX gic control register change
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP4460: cpuidle: WA for ROM bug because of CA9 r2pX gic control register change
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/2] Revert "ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()"
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v9 7/9] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• [PATCH 6/6] omapdss: hdmi4/hdmi5: set regulator voltage to required level
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 5/6] omapdss: hdmi: add OMAP5/DRA7x hdmi driver
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 4/6] omapdss: hdmi pll: Incorporate changes for OMAP5/DRA7x
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 3/6] omapdss: hdmi phy: Incorporate changes for OMAP5/DRA7x
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 2/6] omapdss: hdmi: Add initial OMAP5/DRA7x HDMI core IP library
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 1/6] omapdss: hdmi: support larger register offsets for OMAP5 HDMI core
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 0/6] omapdss: hdmi: Add support for hdmi on OMAP5 and DRA7x SoCs
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 1/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Balaji T K <balajitk@xxxxxx>
• RE: [PATCH v9 7/9] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 0/2] OMAP4460: cpuidle: Workaround for ROM bug because of CA9 r2pX GIC control register change
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/2] OMAP4460: cpuidle: Workaround for ROM bug because of CA9 r2pX GIC control register change
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] ARM: OMAP4460: cpuidle: WA for ROM bug because of CA9 r2pX gic control register change
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 1/2] Revert "ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state()"
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH] ARM: omap2: irq, AM33XX add missing register check
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• RE: [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH v9 0/9] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v9 9/9] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v9 7/9] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v9 6/9] mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v9 5/9] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2: add AM43xx hwmod and PRCM support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v9 3/9] mtd: nand: omap: cleanup: replace local references with generic framework names
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [PATCH V2 0/2] ARM: dts: OMAP2+: add i2c aliases
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 2/2] ARM: dts: AM33xx+: Add i2c aliases
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 1/2] ARM: dts: OMAP3+: Add i2c aliases
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH v9 0/9] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [RESEND PATCH v3 03/11] ASoC: davinci-mcasp: Add DMA register locations to DT
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH V7 1/8] ARM: OMAP3+: do not register non-dt OPP tables for device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 7/8] ARM: dts: DRA7: Add CPU OPP table
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 5/8] ARM: dts: dra7-evm: add smps123 supply for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 2/8] ARM: OMAP2+: add missing lateinit hook for calling pm late init
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 4/8] ARM: dts: omap5-uevm: add smps123 supply for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 3/8] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 6/8] ARM: dts: OMAP5: Add CPU OPP table
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V7 8/8] ARM: dts: OMAP3: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 5/6] ARM: dts: am335x-boneblack: remove unused ti,vcc-aux-disable-is-sleep
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 6/6] ARM: dts: omap4-var-some: fix bus-width
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 4/6] ARM: dts: dra7-evm: mark eMMC as non removable
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 3/6] ARM: dts: am335x-boneblack: mark eMMC as non removable
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/6] ARM: dts: OMAP4/5: start using generic binding for non-removable mmc cards
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 0/6] mmc: omap_hsmmc: start using generic non-removable DT binding
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [RESEND PATCH v3 03/11] ASoC: davinci-mcasp: Add DMA register locations to DT
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] PM/AVS: SmartReflex: fix fake probe success on debugfs fail
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] PM/AVS: SmartReflex: fix fake probe success on debugfs fail
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 4/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] PM/AVS: SmartReflex: fix fake probe success on debugfs fail
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: omap5: Add dr_mode for dwc3
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: OMAP5: Add i2c aliases
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 2/3] hwrng: OMAP3 ROM Random Number Generator support
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP5: Add i2c aliases
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RESEND PATCH V2 1/2] ARM: dts: AM33xx: Add RNG node
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 1/1] gpio/omap: use gpiolib API to mark a GPIO used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] gpio/omap: use gpiolib API to mark a GPIO used as an IRQ
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND PATCH V2 1/2] ARM: dts: AM33xx: Add RNG node
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v5 3/4] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v5 4/4] v4l: ti-vpe: Add de-interlacer support in VPE
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v5 2/4] v4l: ti-vpe: Add helpers for creating VPDMA descriptors
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v5 1/4] v4l: ti-vpe: Create a vpdma helper library
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v5 0/4] v4l: VPE mem to mem driver
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v5 3/4] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 1/1] gpio/omap: use gpiolib API to mark a GPIO used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH v2 3/7] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/7] Make dwc3 use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 5/7] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 6/7] phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 7/7] arm/dts: added dt properties to adapt to the new phy framwork
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 5/8] ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/1] arm: omap: gpmc: remove detection of ecc-capability based on SoC name
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH] ARM: dts: OMAP5: Add i2c aliases
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt on AM335x
  • From: Balaji T K <balajitk@xxxxxx>
• RE: [PATCH v5 3/4] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Kamil Debski <k.debski@xxxxxxxxxxx>
• RE: [PATCH v5 3/4] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Kamil Debski <k.debski@xxxxxxxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [GIT PULL 3/6] omap hwmod changes for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 3/4] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 3/4] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] usb: phy: omap: Add omap-control Support for AM437x
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH v2 2/5] ARM: dts: omap: Add new bindings for OMAP
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 0/6] DRIVERS: IRQCHIP: Add support for crossbar IP
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH] ARM: dts: omap4-panda-es: Do not reset gpio1
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [GIT PULL 3/6] omap hwmod changes for v3.13 merge window
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 2/5] ARM: dts: omap: Add new bindings for OMAP
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH v4 2/2] drm: omap: Enable DT support for DMM
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v4 1/2] arm: dts: omap4+: Add DMM bindings
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v4 0/2] DMM DT adaptation
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] usb: phy: omap: Add omap-control Support for AM437x
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 1/1] ARM: dts: omap3: Adapt USB OTG to generic PHY framework
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [RESEND PATCH V2 1/2] ARM: dts: AM33xx: Add RNG node
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCH v9 7/9] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 6/9] mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 9/9] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 8/9] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 5/9] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v2 2/2] ARM: dts: omap5: Add dr_mode for dwc3
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v9 2/9] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 3/9] mtd: nand: omap: cleanup: replace local references with generic framework names
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 0/9] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v9 1/9] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCHv2] arm: omap2+: hwmod: Add qspi data for am437x.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH] arm: omap2+: hwmod: Add qspi data for am437x.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [GIT PULL 3/6] omap hwmod changes for v3.13 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 3/6] omap hwmod changes for v3.13 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 5/6] omap display and board pdata changes for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [GIT PULL 6/6] omap soc changes for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [GIT PULL 3/6] omap hwmod changes for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [GIT PULL 4/6] omap device tree changes for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [GIT PULL 2/6] omap pdata and dt preparation changes for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [GIT PULL 1/6] omap non-urgent fixes for v3.13 merge window
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 0/3] omapdss: venc: Add support for bypass and acbias.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/3] video: venc: Add new callback and handling for bypass and acbias setup.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 3/3] omapdss: Add OPA362 analog video amplifier driver.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• Re: [PATCH] arm: omap2+: hwmod: Add qspi data for am437x.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] arm: omap2+: hwmod: Add qspi data for am437x.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] usb: phy: omap: Add omap-control Support for AM437x
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] usb: phy: omap: Add omap-control Support for AM437x
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH] ARM: dts: am33xx, change usb ctrl module label
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: hwmod: Add USB hwmod data for AM437x.
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/1] ARM: dts: omap3: Adapt USB OTG to generic PHY framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• OMAP baseline test results for v3.12-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv8 01/36] CLK: TI: Add DPLL clock support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] set data enable logic level to low
  • From: Roel Kluin <roel.kluin@xxxxxxxxx>
• Re: Odd behavior with dpll4_m4x2_ck on omap3 + DT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/4] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/4] remove devm_pinctrl_get_select_default from drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 3/6] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 0/6] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• RE: [PATCH v8 3/6] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• RE: [PATCH v8 0/6] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [RESEND PATCH V2 1/2] ARM: dts: AM33xx: Add RNG node
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/11] ARM: OMAP2+: CM cleanup series
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [RESEND PATCH V2 1/2] ARM: dts: AM33xx: Add RNG node
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: wakeupgen: AM43x adaptation
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH 00/11] ARM: OMAP2+: CM cleanup series
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod changes for v3.13
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 11/11] ARM: OMAP2+: AM43x PRCM init
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 10/11] ARM: OMAP2+: AM43x: PRCM kbuild
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 09/11] ARM: OMAP2+: hwmod: AM43x operations
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 08/11] ARM: OMAP2+: hwmod: AM43x support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 07/11] ARM: OMAP2+: CM: AM43x clockdomain data
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 06/11] ARM: OMAP2+: PM: AM43x powerdomain data
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 05/11] ARM: OMAP2+: PRCM: AM43x definitions
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 04/11] ARM: OMAP2+: hwmod: AM335x: remove static register offs
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 03/11] ARM: OMAP2+: hwmod: AM335x: runtime register update
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 01/11] ARM: OMAP2+: CM: cm_inst offset s16->u16
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v6 00/11] ARM: OMAP2+: AM43x PRCM basic support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH -next] usb: phy: omap: remove redundant dev_err call in omap_control_usb_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH 00/11] ARM: OMAP2+: CM cleanup series
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL 1/6] omap non-urgent fixes for v3.13 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH V5] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: OMAP2+: CM cleanup series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: OMAP2+: CM cleanup series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 6/8] ARM: dts: OMAP4: Add hwspinlock node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: N900: TWL4030 Keypad Matrix definition
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Input: twl4030_keypad - add device tree support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod changes for v3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod changes for v3.13
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: hwmod changes for v3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: Device Tree for 3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 0/6] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 4/6] mtd:nand:omap2: updated support for BCH4 ECC scheme
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH] ARM: DRA: DTS: Remove clock-frequency field for cpu timers
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v8 3/6] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [GIT PULL] ARM: OMAP: Device Tree for 3.13, take #2
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: Device Tree for 3.13
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v8 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 2/6] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: Device Tree for 3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: hwmod changes for v3.13
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: dts: dra7-evm: Add mmc1 node for micro-sd support
  • From: Balaji T K <balajitk@xxxxxx>
• [GIT PULL] ARM: OMAP: Device Tree for 3.13
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 10/11] ARM: OMAP3: PRM: move PRCM interrupt handler helper to PRM driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 11/11] ARM: OMAP2+: CM: move direct register write macros to internal header
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 09/11] ARM: OMAP3: PRM: move iva2 force idle functionality to PRM driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 08/11] ARM: OMAP3: control: add API for setting IVA bootmode
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 07/11] ARM: OMAP3: CM/PM: add new API for checking IVA2 idle status
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 04/11] ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 06/11] ARM: OMAP3: CM/PM: add API for forcing IVA2 clk enable/disable
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 05/11] ARM: OMAP3: CM/PM: add API for accessing module clock enable registers
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 01/11] ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 02/11] ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 03/11] ARM: OMAP3: McBSP: do not access CM register directly
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 00/11] ARM: OMAP2+: CM cleanup series
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH V6 02/15] ARM: OMAP2+: AM33XX: add lateinit hook for calling pm late init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v8 5/6] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v8 4/6] mtd:nand:omap2: updated support for BCH4 ECC scheme
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v8 3/6] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v8 2/6] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v8 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: omap5: Add dr_mode for dwc3
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v8 5/6] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v8 4/6] mtd:nand:omap2: updated support for BCH4 ECC scheme
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v8 2/6] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v8 3/6] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v8 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v8 0/6] mtd:nand:omap2: clean-up of supported ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [PATCH v7 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH v7 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 3/4] v4l: ti-vpe: Add VPE mem to mem driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>