[PATCH v2 2/5] mtd: nand: omap2: Fix device detection path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Pekon Gupta <pekon@xxxxxx>

Because the device bus can be 8-bit or 16-bit width, yet ONFI detection
cannot work in 16-bit mode, we need to set the NAND_BUSWIDTH_AUTO option
which allows proper initialization configuration.

Once the bus width is detected, nand_scan_ident() updates the nand_chip struct
'option' field to use the appropriate read/write functions and configure
the ECC engine.

Signed-off-by: Pekon Gupta <pekon@xxxxxx>
[rebased and clean-up a bit pekon's original work]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
---
 drivers/mtd/nand/omap2.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 4ecf0e5..e01a936 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1855,8 +1855,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 	info->mtd.name		= dev_name(&pdev->dev);
 	info->mtd.owner		= THIS_MODULE;
 
-	info->nand.options	= pdata->devsize;
-	info->nand.options	|= NAND_SKIP_BBTSCAN;
+	info->nand.options	|= NAND_SKIP_BBTSCAN | NAND_BUSWIDTH_AUTO;
 #ifdef CONFIG_MTD_NAND_OMAP_BCH
 	info->of_node		= pdata->of_node;
 #endif
@@ -1903,6 +1902,10 @@ static int omap_nand_probe(struct platform_device *pdev)
 		info->nand.chip_delay = 50;
 	}
 
+	err = nand_scan_ident(&info->mtd, 1, NULL);
+	if (err < 0)
+		goto out_release_mem_region;
+
 	switch (pdata->xfer_type) {
 	case NAND_OMAP_PREFETCH_POLLED:
 		info->nand.read_buf   = omap_read_buf_pref;
@@ -2013,17 +2016,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* DIP switches on some boards change between 8 and 16 bit
-	 * bus widths for flash.  Try the other width if the first try fails.
-	 */
-	if (nand_scan_ident(&info->mtd, 1, NULL)) {
-		info->nand.options ^= NAND_BUSWIDTH_16;
-		if (nand_scan_ident(&info->mtd, 1, NULL)) {
-			err = -ENXIO;
-			goto out_release_mem_region;
-		}
-	}
-
 	/* rom code layout */
 	if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) {
 
-- 
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux