On 10/31/2013 11:27 AM, Nishanth Menon wrote:
> On 10/25/2013 10:57 AM, Tero Kristo wrote:
>> This is a multipurpose clock node, which contains support for multiple
>> sub-clocks. Uses basic composite clock type to implement the actual
>> functionality, and TI specific gate, mux and divider clocks.
>>
>> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
>> ---
>> .../devicetree/bindings/clock/ti/composite.txt | 54 +++++
>> drivers/clk/ti/Makefile | 2 +-
>> drivers/clk/ti/composite.c | 222 ++++++++++++++++++++
>> include/linux/clk/ti.h | 8 +
>> 4 files changed, 285 insertions(+), 1 deletion(-)
>> create mode 100644 Documentation/devicetree/bindings/clock/ti/composite.txt
>> create mode 100644 drivers/clk/ti/composite.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
>> new file mode 100644
>> index 0000000..5f43c47
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
>> @@ -0,0 +1,54 @@
>> +Binding for TI composite clock.
>> +
>> +Binding status: Unstable - ABI compatibility may be broken in the future
>> +
>> +This binding uses the common clock binding[1]. It assumes a
>> +register-mapped composite clock with multiple different sub-types;
>> +
>> +a multiplexer clock with multiple input clock signals or parents, one
>> +of which can be selected as output, this behaves exactly as [2]
>> +
>> +an adjustable clock rate divider, this behaves exactly as [3]
>> +
>> +a gating function which can be used to enable and disable the output
>> +clock, this behaves exactly as [4]
>> +
>> +The binding must provide a list of the component clocks that shall be
>> +merged to this clock. The component clocks shall be of one of the
>> +"ti,*composite*-clock" types.
>> +
>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +[2] Documentation/devicetree/bindings/clock/ti/mux.txt
>> +[3] Documentation/devicetree/bindings/clock/ti/divider.txt
>> +[4] Documentation/devicetree/bindings/clock/ti/gate.txt
>> +
>> +Required properties:
>> +- compatible : shall be: "ti,composite-clock"
>> +- clocks : link phandles of component clocks
>> +- #clock-cells : from common clock binding; shall be set to 0.
>> +
>> +Examples:
>> +
>> +usb_l4_gate_ick: usb_l4_gate_ick {
>> + #clock-cells = <0>;
>> + compatible = "ti,composite-interface-clock";
>> + clocks = <&l4_ick>;
>> + ti,bit-shift = <5>;
>> + reg = <0x0a10>;
>> +};
>> +
>> +usb_l4_div_ick: usb_l4_div_ick {
>> + #clock-cells = <0>;
>> + compatible = "ti,composite-divider-clock";
>> + clocks = <&l4_ick>;
>> + ti,bit-shift = <4>;
>> + ti,max-div = <1>;
>> + reg = <0x0a40>;
>> + ti,index-starts-at-one;
>> +};
>> +
>> +usb_l4_ick: usb_l4_ick {
>> + #clock-cells = <0>;
>> + compatible = "ti,composite-clock";
>> + clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
>> +};
>From Topology perspective, would this be a better approach?
usb_l4_ick: usb_l4_ick {
#clock-cells = <0>;
compatible = "ti,composite-clock";
usb_l4_gate_ick: usb_l4_gate_ick {
#clock-cells = <0>;
compatible = "ti,composite-interface-clock";
clocks = <&l4_ick>;
ti,bit-shift = <5>;
reg = <0x0a10>;
};
usb_l4_div_ick: usb_l4_div_ick {
#clock-cells = <0>;
compatible = "ti,composite-divider-clock";
clocks = <&l4_ick>;
ti,bit-shift = <4>;
ti,max-div = <1>;
reg = <0x0a40>;
ti,index-starts-at-one;
};
};
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
