Re: [PATCH v11 04/10] mtd: nand: omap: use DT specified bus-width only for scanning NAND device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 24, 2013 at 03:43:00PM -0700, Brian Norris wrote:
> On Thu, Oct 24, 2013 at 06:27:15PM -0300, Ezequiel Garcia wrote:
> > On Thu, Oct 24, 2013 at 06:20:20PM +0530, Pekon Gupta wrote:
> > > This patch:
> > > - calls nand_scan_ident() using bus-width as passed by DT
> > > - removes double calls to nand_scan_ident(), incase first call fails
> > >   then omap_nand_probe just returns error.
> > > 
> > > Signed-off-by: Pekon Gupta <pekon@xxxxxx>
> > > ---
> > >  drivers/mtd/nand/omap2.c | 21 +++++++++------------
> > >  1 file changed, 9 insertions(+), 12 deletions(-)
> > > 
> > > diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> > > index 5596368..f464321 100644
> > > --- a/drivers/mtd/nand/omap2.c
> > > +++ b/drivers/mtd/nand/omap2.c
> > > @@ -1856,7 +1856,6 @@ static int omap_nand_probe(struct platform_device *pdev)
> > >  	mtd->name		= dev_name(&pdev->dev);
> > >  	mtd->owner		= THIS_MODULE;
> > >  	nand_chip		= &info->nand;
> > > -	nand_chip->options	= pdata->devsize;
> > >  	nand_chip->options	|= NAND_SKIP_BBTSCAN;
> > >  #ifdef CONFIG_MTD_NAND_OMAP_BCH
> > >  	info->of_node		= pdata->of_node;
> > > @@ -1904,6 +1903,15 @@ static int omap_nand_probe(struct platform_device *pdev)
> > >  		nand_chip->chip_delay = 50;
> > >  	}
> > >  
> > > +	/* scan NAND device connected to chip controller */
> > > +	nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
> > 
> > Hm.. this only works if the device is listed in nand_flash_ids[] array,
> > so that ONFI detection is not used.
> 
> But this is no more broken than it used to be, no? I mean, you would
> never properly detect an x16 ONFI flash with the old
> double-nand_scan_ident() method, right?
> 

That's right. But the issue is not really fixed either.

> > To make ONFI detection work I think you
> > need to do as Brian suggested and use NAND_BUSWIDTH_AUTO.
> 
> I think that is the correct way forward. But Pekon seems to think that
> will require more invasive changes to the GPMC code. But I'm not sure
> why.
> 

Hm... not sure. AFAIK, the GPMC should be *already* configured prior to the
NAND driver being probed.

> > (Odd: why is there no current user of that auto-width option?)
> 
> Hmm, I could have sworn somebody was using that... I know there was some
> pending work on using it for GPIO NAND, but Alexander Shiyan never
> followed up on the latest comments. It also seems like the original
> author (Matthieu Castet) was working on OMAP support about a year ago,
> but things stalled when there wasn't proper mainline support for much of
> it:
> 
>   http://thread.gmane.org/gmane.linux.ports.arm.omap/88550/focus=44770
> 
> Personally, I've only ever used x8 NAND, so I don't have much to go on
> here.
> 
> > Anyway, I really think we should fix this now and independently
> > of the evolution of this ECC DT binding discussion.
> > That way you can keep sending a smaller ECC DT binding patchset and
> > make reviewers focus on what's really important in each case.
> 
> AFAIK, the ECC DT bindings were all approved, and the code looked OK to
> my knowledge, except for this single patch. I had recommended either its
> total removal or its simplification (i.e., this current patch).
> 

FWIW, I'm in favor of *completely* dropping whatever doesn't belong
to the ECC DT binding.

> I will be taking a last look and queueing this series up soon, I
> believe.
> 
> > I have a few fixes (based on your work) and I'll send them now, after
> > I complete the tests. We can continue our discussion there.
> 
> I'll take a look at those soon.
> 

Ok, cool.

> So am I to understand you have hardware for testing Pekon's work now,
> Ezequiel? That will be great if we can have better Reviewed-by/Tested-by
> results.
> 

Yup, I gave it quick test actually, but nothing deep. Let me test some
more maybe later today/tomorrow. I just wanted to sort this out first.
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux