Re: [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Pekon,

On Thu, Oct 24, 2013 at 06:20:16PM +0530, Pekon Gupta wrote:
> *changes v10 -> v11*
> - [PATCH v10 04/10] replaced with newer [PATCH v11 04/11] so that
>   nand_scan_ident() is called only once.
>   discussion thread with Brian Norris <computersforpeace@xxxxxxxxx>
>   <http://lists.infradead.org/pipermail/linux-mtd/2013-October/049335.html>
> - No change in any other patch
> 
> 
> *changes v9 -> v10*
> [PATCH 1/10], [PATCH 2/10]
>   swapped [PATCH v9 1/9] and [PATCH v9 2/9] so that DT parsing updates
>   (with backward compatibility) happen before the deprecation of DT values.
>   This way DTB does not break functionally between the patches.
> [PATCH 3/10] <no update>
> [PATCH 4/10] 
>   dropped [PATCH v9 4/9] introducing NAND_BUSWIDTH_AUTO, instead
>   using DT 'nand-bus-width' for device bus-width. Refer discussion thread 
>   <http://lists.infradead.org/pipermail/linux-mtd/2013-October/049198.html>
> [PATCH 5/10] <no update>
> [PATCH 6/10] <no update>
> [PATCH 7/10] 
>   separated out drivers/mtd/nand/Kconfig updates into separate [PATCH v10 10/10]
>   cleanup: s/info->nand\./nand_chip->
> [PATCH 8/10] <no update>
> [PATCH 9/10] cleanup: s/out_release_mem_region/return_error
> [PATCH 10/10] <new> spawned from [PATCH v9 8/9] for Kconfig updates
> 
> 
> *changes v8 -> v9*
> [PATCH 1/9] <no update from [PATCH v8 1/6]>
> [PATCH 2/9] <only commit log updated from [PATCH v8 2/6]>
>  As per feedbacks from Brian Norris <computersforpeace@xxxxxxxxx> previous
>  revision [PATCH v8 3/6] and [PATCH 4/6] are split into following sub-patches:
> - [PATCH 3/9] <new> replaces local reference with generic names (mtd, nand_chip)
> - [PATCH 4/9] <new> enables auto-detection of bus-width
> - [PATCH 5/9] <new> removes omap3_init_bch: populates ecc-scheme data
> - [PATCH 6/9] <new> removes omap3_init_bch_tail: populates ecc-layout
> - [PATCH 7/9] <new> replaces lib/bch.c with nand_bch.c wrapper
> [PATCH 8/9] <no update same as [PATCH v8 5/6]
> [PATCH 9/9] removed devm_free_xx functions
> 
> 
> *Changes v7 -> v8*
> [PATCH 1/6] <no updates>
> [PATCH 2/6]
> 	- updated DT parsing of "ti,nand-ecc-opts" so that its "ham1" remains
> 		compatible to "sw","hw","hw-romcode"
> 	- updated DT parsing of "ti,elm-id" to retain compatibility to "elm_id"
> 	- using of_parse_phandle() to get ELM device pointer from DT
> [PATCH 3..6/6] <commit log updates>
> 
> 
> *Changes v6 -> v7*
> [PATCH 1/6] <NEW> split from [PATCH v6 2/4] as per feedbacks from Brian Norris <computersforpeace@xxxxxxxxx>
> [PATCH 2/6] incorporated feedbacks from DT maintainers
> [PATCH 3/6] cleaned and incorporated feedbacks from Brian Norris <computersforpeace@xxxxxxxxx>
> [PATCH 4/6] rebasing changes and cleanup
> [PATCH 5/6] updated omap3430-sdp.dts
> [PATCH 6/6] <NEW> updated for devm_xx
> 
> 
> *Changes v5 -> v6*
> [PATCH 1/4]: 
> 	- updated DT binding for gpmc-nand based on 'Olof Johansson's feedbacks
> 	http://lists.infradead.org/pipermail/linux-mtd/2013-August/048394.html
> 	- detection of ELM device via ti,elm-id DT node, moved to gpmc.c driver
> [PATCH 2/4]
> 	- removed: support for following obselete ECC schemes
> 	OMAP_ECC_HAMMING_CODE_DEFAULT (S/W based 1-bit Hamming ECC)
> 	OMAP_ECC_HAMMING_CODE_HW_ROMCODE (H/W based 1-bit Hamming ECC scheme)
> 	- updated: using omap_oobinfo as chip->ecc.layout for all ecc-schemes
> 	- clean: error messages
> [PATCH 3/4] cleaned to include changes for OMAP_ECC_BCH8_CODE_HW only
> [PATCH 4/4] updated to include DT property changes
> 
> 
> *Changes v4 -> v5*
> - Rebased to linux-next 
> IMPORTANT: Need to revert commit fb1585b, [PATCH 2/4] part of previous version
> 	http://lists.infradead.org/pipermail/linux-mtd/2013-July/047441.html
> 
> - Swapped PATCH-1 & PATCH-2 to maintain bisectibility & compilation dependency
> 	http://lists.infradead.org/pipermail/linux-mtd/2013-July/047461.html
> 
> - PATCH-2: re-ordered call to is_elm_present() for later updates ELM driver
> 	- dropped changes in include/linux/platform_data/elm.h (not needed)
> - PATCH-3: re-ordered call to is_elm_present() for later updates ELM driver
> - Re-formated patch description (replaced tabs with white-spaces)
> 
> 
> *Changes v3 -> v4*
> (Resent with CC: devicetree-discuss@xxxxxxxxxxxxxxxx)
> - [Patch 1/3] removed MTD_NAND_OMAP_BCH8 & MTD_NAND_OMAP_BCH4 from nand/Kconfig
> 	ECC scheme selectable via nand DT (nand-ecc-opt).
> - [*] rebased for l2-mtd.git
> 
> 
> *Changes v2 -> v3*
> (Resent with Author Name fixed)
> - PATCH-1: re-arranged code to remove redundancy, added NAND_BUSWIDTH_AUTO
> - PATCH-2: updated nand-ecc-opt DT mapping and Documentation
> - PATCH-3: code-cleaning + changes to match PATCH-1
> - PATCH-4 <DROPPED> update DT attribute for ti,nand-ecc-opt 
> 	- received feedback to keep DT mapping independent of linuxism
> - PATCH-4:<NEW> : ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
> 	- independent patch for AM335x-evm.dts update based on PATCH-2
> 
> 
> *Changes v1 -> v2*
> 	added 	[PATCH 3/4] and [PATCH 4/4]
> 
> 
> After this patch series, omap2-nand driver will supports following ECC schemes:
> +---------------------------------------+---------------+---------------+
> | ECC scheme                            |ECC calculation|Error detection|
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_HAM1_CODE_HW                  |H/W (GPMC)     |S/W            |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH4_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W (lib/bch.c)|
> | (needs CONFIG_MTD_NAND_ECC_BCH)       |               |               |
> |                                       |               |               |
> |OMAP_ECC_BCH4_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
> | (needs CONFIG_MTD_NAND_OMAP_BCH &&    |               |               |
> |        ti,elm-id)                     |               |               |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W (lib/bch.c)|
> | (needs CONFIG_MTD_NAND_ECC_BCH)       |               |               |
> |                                       |               |               |
> |OMAP_ECC_BCH8_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
> | (needs CONFIG_MTD_NAND_OMAP_BCH &&    |               |               |
> |        ti,elm-id)                     |               |               |
> +---------------------------------------+---------------+---------------+
> 
> 
> Pekon Gupta (10):
>   ARM: OMAP2+: cleaned-up DT support of various ECC schemes
>   mtd: nand: omap: combine different flavours of 1-bit hamming ecc
>     schemes
>   mtd: nand: omap: cleanup: replace local references with generic
>     framework names
>   mtd: nand: omap: use DT specified bus-width only for scanning NAND
>     device
>   mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in
>     device_probe
>   mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
>   mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC
>     instead of lib/bch.c
>   ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
>   mtd: nand: omap: updated devm_xx for all resource allocation and free
>     calls
>   mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
> 
>  .../devicetree/bindings/mtd/gpmc-nand.txt          |  16 +-
>  arch/arm/boot/dts/am335x-evm.dts                   |   3 +-
>  arch/arm/boot/dts/omap3430-sdp.dts                 |   2 +-
>  arch/arm/mach-omap2/board-flash.c                  |   2 +-
>  arch/arm/mach-omap2/gpmc.c                         |  48 +-
>  drivers/mtd/nand/Kconfig                           |  40 +-
>  drivers/mtd/nand/omap2.c                           | 641 +++++++++------------
>  include/linux/platform_data/mtd-nand-omap2.h       |  18 +-
>  8 files changed, 348 insertions(+), 422 deletions(-)
> 

I tested this using the AM335x device tree you posted earlier with
the 16-bit NAND Beaglebone cape. For all the patches:

Tested-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>

The ECC bindings look much much cleaner now, nice job!
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux