Hi Mark, On Thursday 14 November 2013 07:42 PM, Mark Rutland wrote: > On Thu, Nov 14, 2013 at 12:18:48PM +0000, Sricharan R wrote: >> Some socs have a large number of interrupts requests to service >> the needs of its many peripherals and subsystems. All of the >> interrupt lines from the subsystems are not needed at the same >> time, so they have to be muxed to the irq-controller appropriately. >> In such places a interrupt controllers are preceded by an CROSSBAR >> that provides flexibility in muxing the device requests to the controller >> inputs. >> >> This driver takes care a allocating a free irq and then configuring the >> crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should >> be called right before the irqchip_init, so that it is setup to handle the >> irqchip callbacks. >> >> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> >> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> >> Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx> >> Cc: Russell King <linux@xxxxxxxxxxxxxxxx> >> Cc: Tony Lindgren <tony@xxxxxxxxxxx> >> Cc: Rajendra Nayak <rnayak@xxxxxx> >> Cc: Marc Zyngier <marc.zyngier@xxxxxxx> >> Cc: Grant Likely <grant.likely@xxxxxxxxxx> >> Cc: Rob Herring <rob.herring@xxxxxxxxxxx> >> Signed-off-by: Sricharan R <r.sricharan@xxxxxx> >> Acked-by: Kumar Gala <galak@xxxxxxxxxxxxxx> (for DT binding portion) >> Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> >> --- >> [V2] Addressed Thomas Gleixner <tglx@xxxxxxxxxxxxx> comments >> and renamed the bindings as per Kumar Gala <galak@xxxxxxxxxxxxxx> >> comments. >> [V3] Changed static inline const to static inline int and removed >> unnecessary variable initialization as per >> Thomas Gleixner <tglx@xxxxxxxxxxxxx>. Updated commit tags >> [V4] Renamed crossbar_init as irqcrossbar_init as per >> Rajendra Nayak <rnayak@xxxxxx> suggestion. >> >> .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++ >> drivers/irqchip/Kconfig | 8 + >> drivers/irqchip/Makefile | 1 + >> drivers/irqchip/irq-crossbar.c | 206 ++++++++++++++++++++ >> include/linux/irqchip/irq-crossbar.h | 11 ++ >> 5 files changed, 253 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt >> create mode 100644 drivers/irqchip/irq-crossbar.c >> create mode 100644 include/linux/irqchip/irq-crossbar.h >> >> diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt >> new file mode 100644 >> index 0000000..fb88585 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt >> @@ -0,0 +1,27 @@ >> +Some socs have a large number of interrupts requests to service >> +the needs of its many peripherals and subsystems. All of the >> +interrupt lines from the subsystems are not needed at the same >> +time, so they have to be muxed to the irq-controller appropriately. >> +In such places a interrupt controllers are preceded by an CROSSBAR >> +that provides flexibility in muxing the device requests to the controller >> +inputs. >> + >> +Required properties: >> +- compatible : Should be "ti,irq-crossbar" >> +- reg: Base address and the size of the crossbar registers. >> +- ti,max-irqs: Total number of irqs available at the interrupt controller. >> +- ti,reg-size: Size of a individual register in bytes. Every individual >> + register is assumed to be of same size. Valid sizes are 1, 2, 4. >> +- ti,irqs-reserved: List of the reserved irq lines that are not muxed using >> + crossbar. These interrupt lines are reserved in the soc, >> + so crossbar bar driver should not consider them as free >> + lines. > The combination of the ti,max-irqs and ti,irqs-reserved properties seems > backwards to me. Why can we not describe the set of IRQs that _can_ be > used? Total set of irqs that are usable is max - reserved. Since reserved irqs are not continuous, we have to give the list. During the init we count the total number of reserved and get the usable one. >> + >> +Examples: >> + crossbar_mpu: @4a020000 { >> + compatible = "ti,irq-crossbar"; >> + reg = <0x4a002a48 0x130>; >> + ti,max-irqs = <160>; >> + ti,reg-size = <2>; >> + ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; >> + }; > [...] > >> + /* Get and mark reserved irqs */ >> + irqsr = of_get_property(node, "ti,irqs-reserved", &size); >> + if (irqsr) { >> + size /= sizeof(__be32); >> + >> + for (i = 0; i < size; i++) { >> + entry = be32_to_cpup(irqsr + i); >> + if (entry > max) { >> + pr_err("Invalid reserved entry\n"); >> + goto err3; >> + } >> + cb->irq_map[entry] = 0; >> + } >> + } > Don't deal with the raw DTB. Use of_property_read_u32_index. Ok, i will correct this. >> + >> + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); >> + if (!cb->register_offsets) >> + goto err3; >> + >> + of_property_read_u32(node, "ti,reg-size", &size); > If "ti,reg-size" isn't present, size is uninitialized. Please check the > return value of of_property_read_u32. Ok, will correct this. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html