Linux LEDS Development

• Thread Index

• Re: [PATCH] leds: lm3601x: fix semicolon.cocci warnings
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] leds: lm3601x: fix semicolon.cocci warnings
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH v3 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH V1 5/5] backlight: qcom-wled: Add auto string detection logic
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V2 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V2 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 1/3] leds: triggers: provide led_trigger_register_format()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] leds: triggers: provide led_trigger_register_format()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH V1 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 2/2] leds: lm3601x: Introduce the lm3601x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 2/2] leds: lm3601x: Introduce the lm3601x LED driver
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH v2 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 2/2] leds: lm3601x: Introduce the lm3601x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V1 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH v3 2/3] can: simplify LED trigger handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] tty: implement led triggers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V2 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V1 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V2 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 3/3] tty: implement led triggers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v3 3/3] tty: implement led triggers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] leds: triggers: provide led_trigger_register_format()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] led_trigger_register_format and tty triggers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] can: simplify LED trigger handling
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: lm3601x: Introduce the lm3601x LED driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH V1 5/5] backlight: qcom-wled: Add auto string detection logic
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 2/2] leds: lm3601x: Introduce the lm3601x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V1 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V2 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V1 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 1/5] qcom: wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: kgunda@xxxxxxxxxxxxxx
• RE: [PATCH 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Xiaotong Lu (卢小通) <xiaotong.lu@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: "Jingoo Han" <jingoohan1@xxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 2/2] leds: Add Spreadtrum SC27xx breathing light controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v1] leds: wm831x-status: Use sysfs_match_string() helper
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1] leds: wm831x-status: Use sysfs_match_string() helper
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v1] leds: wm831x-status: Use sysfs_match_string() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V2 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V2 5/5] backlight: qcom-wled: Add auto string detection logic
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V2 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V2 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V2 1/5] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V2 0/5] backlight: qcom-wled: Support for QCOM wled driver
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [PATCH V1 3/5] backlight: qcom-wled: Add support for short circuit handling
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V1 4/5] backlight: qcom-wled: Add support for OVP interrupt handling
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V1 5/5] backlight: qcom-wled: Add auto string detection logic
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V1 2/5] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V1 1/5] qcom: wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V1 0/5] backlight: qcom-wled: Support for QCOM wled driver
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] leds: upboard: Add LED support
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] leds: upboard: Add LED support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [RFC PATCH RESEND 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH RESEND 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH RESEND 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 0/3] UP Squared board drivers
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH RESEND 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
  • From: kgunda@xxxxxxxxxxxxxx
• [RFC PATCH 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [RFC PATCH 2/3] leds: upboard: Add LED support
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [RFC PATCH 0/3] UP Squared board drivers
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [RFC PATCH 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [RFC PATCH RESEND 0/3] UP Squared board drivers
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [RFC PATCH RESEND 2/3] leds: upboard: Add LED support
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [RFC PATCH RESEND 1/3] mfd: upboard: Add UP2 platform controller driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• [RFC PATCH RESEND 3/3] pinctrl: upboard: Add UP2 pinctrl and gpio driver
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] UP Squared board drivers
  • From: Javier Arteaga <javier@xxxxxxxxxx>
• Re: [PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [RESEND PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Standardized LED function names [was: Re: [PATCH v3] leds: add LED driver for CR0014114 board]
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: Standardized LED function names [was: Re: [PATCH v3] leds: add LED driver for CR0014114 board]
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Standardized LED function names [was: Re: [PATCH v3] leds: add LED driver for CR0014114 board]
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 2/2] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v8 2/2] leds: add LED driver for CR0014114 board
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [RESEND PATCH v6 4/5] ARM: dts: rockchip: set PWM delay backlight settings for Veyron.
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [RESEND PATCH v6 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [RESEND PATCH v3 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v3 1/4] backlight: pwm_bl: linear interpolation between brightness-levels
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v3 3/4] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v3 4/4] dt-bindings: pwm-backlight: move brightness-levels to optional.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 3/4] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 1/4] backlight: pwm_bl: linear interpolation between brightness-levels
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [GIT PULL] LED updates for 4.17-rc1
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [GIT PULL] LED updates for 4.17-rc1
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 2/2] leds: add LED driver for CR0014114 board
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RESEND PATCH v6 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH v6 3/5] pwm-backlight: add support for PWM delays proprieties.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v8 2/2] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: Standardized LED function names [was: Re: [PATCH v3] leds: add LED driver for CR0014114 board]
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: Potential DoS (or worse?) between 2.6.17 and 4.7
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v7 2/2] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• [RESEND PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v6 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v6 4/5] ARM: dts: rockchip: set PWM delay backlight settings for Veyron.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v6 3/5] pwm-backlight: add support for PWM delays proprieties.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH v6 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v6 2/2] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: add LED driver for CR0014114 board
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 2/2] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Standardized LED function names [was: Re: [PATCH v3] leds: add LED driver for CR0014114 board]
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• [PATCH v4 2/2] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: Add vendor prefix and docs for CR0014114
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v6 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v6 3/5] pwm-backlight: add support for PWM delays proprieties.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v6 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v6 4/5] ARM: dts: rockchip: set PWM delay backlight settings for Veyron.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 4.9 v2 0/2] Clear LED_BLINK_SW flag in led_blink_set()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: add Panasonic AN30259A support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 2/2] leds: add Panasonic AN30259A support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 2/2] leds: add Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: add Panasonic AN30259A support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: fix wrong dmi_match on PC Engines APU LEDs
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Standardized LED function names [was: Re: [PATCH v3] leds: add LED driver for CR0014114 board]
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 4.9 v2 0/2] Clear LED_BLINK_SW flag in led_blink_set()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 4.9 v2 2/2] led: core: Clear LED_BLINK_SW flag in led_blink_set()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 4.9 v2 1/2] Revert "led: core: Fix brightness setting when setting delay_off=0"
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• [PATCH v3 2/2] leds: add Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [PATCH v3 0/2] Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: fix wrong dmi_match on PC Engines APU LEDs
  • From: Hans Ulli Kroll <ulli.kroll@xxxxxxxxxxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: add LED driver for CR0014114 board
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v3] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v2] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH] leds: add LED driver for CR0014114 board
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Matthias Schiffer <mschiffer@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Matthias Schiffer <mschiffer@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Mathias Kresin <dev@xxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] leds: fix wrong dmi_match on PC Engines APU LEDs
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 4.4 16/34] led: core: Fix brightness setting when setting delay_off=0
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/2] leds: add Panasonic AN30259A support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 4.4 16/34] led: core: Fix brightness setting when setting delay_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 4.4 16/34] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4.4 16/34] led: core: Fix brightness setting when setting delay_off=0
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: add LED driver for CR0014114 board
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add Panasonic AN30259A support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: add LED driver for CR0014114 board
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4.4 16/34] led: core: Fix brightness setting when setting delay_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: A case of watchdog+LED shared GPIO pin
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH] leds: add LED driver for CR0014114 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 4.4 16/34] led: core: Fix brightness setting when setting delay_off=0
  • From: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] leds: add Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [PATCH v2 0/2] Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [PATCH] leds: fix wrong dmi_match on PC Engines APU LEDs
  • From: Hans Ulli Kroll <ulli.kroll@xxxxxxxxxxxxxx>
• Re: A case of watchdog+LED shared GPIO pin
  • From: Pavel Machek <pavel@xxxxxx>
• Re: A case of watchdog+LED shared GPIO pin
  • From: Ильяс Гасанов <torso.nafi@xxxxxxxxx>
• Re: A case of watchdog+LED shared GPIO pin
  • From: Pavel Machek <pavel@xxxxxx>
• A case of watchdog+LED shared GPIO pin
  • From: Ильяс Гасанов <torso.nafi@xxxxxxxxx>
• Re: [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH] leds: Extends disk trigger for reads and writes
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/10] pwm: extend PWM framework with PWM modes
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] leds: ncp5623: Add device tree binding documentation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH] leds: Extends disk trigger for reads and writes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 01/10] pwm: extend PWM framework with PWM modes
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 2/2] leds: Add driver for NCP5623 3-channel I2C LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 1/2] leds: ncp5623: Add device tree binding documentation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 06/10] pwm: add PWM modes
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 06/10] pwm: add PWM modes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 10/10] pwm: atmel: add push-pull mode support
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 09/10] pwm: add documentation for pwm push-pull mode
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 08/10] pwm: add push-pull mode support
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 07/10] pwm: atmel: add pwm capabilities
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 06/10] pwm: add PWM modes
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 04/10] pwm: pxa: populate PWM mode in of_xlate function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Claudiu Beznea <Claudiu.Beznea@xxxxxxxxxxxxx>
• [PATCH v3 03/10] pwm: cros-ec: populate PWM mode in of_xlate function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 02/10] pwm: clps711x: populate PWM mode in of_xlate function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 01/10] pwm: extend PWM framework with PWM modes
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 00/10] extend PWM framework to support PWM modes
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Sean Young <sean@xxxxxxxx>
• Re: [PATCH v3 05/10] pwm: add PWM mode to pwm_config()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v4 2/2] leds: Add driver for NCP5623 3-channel I2C LED driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 1/2] leds: ncp5623: Add device tree binding documentation
  • From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
• [PATCH v4 2/2] leds: Add driver for NCP5623 3-channel I2C LED driver
  • From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
• [PATCH v4 0/2] leds: Add driver for NCP5623 3-channel I2C LED driver
  • From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
• Re: [PATCH 2/2] leds: add Panasonic AN30259A support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 2/2] leds: add Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] leds: add Panasonic AN30259A support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] leds: add Panasonic AN30259A support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 2/2] leds: add Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: document Panasonic AN30259A bindings
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [PATCH 0/2] Panasonic AN30259A support
  • From: Simon Shields <simon@xxxxxxxxxxxxx>
• [GIT PULL] LED update for 4.16-rc3
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• RE: [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] MAINTAINERS: Remove Richard Purdie from LED maintainers
  • From: Richard Purdie <rpurdie@xxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Remove Richard Purdie from LED maintainers
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• RE: [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH] leds: Add more product/board names for PC Engines APU2
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: Add more product/board names for PC Engines APU2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v7 1/2] leds: fix Kconfig text for MLXCPLD and SYSCON
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH v8 1/2] leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIG
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v8 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• [PATCH v8 0/2] Introduce mlxreg LED driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• [PATCH v8 1/2] leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIG
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• RE: [PATCH v7 1/2] leds: fix Kconfig text for MLXCPLD and SYSCON
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH v7 1/2] leds: fix Kconfig text for MLXCPLD and SYSCON
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] leds: Add more product/board names for PC Engines APU2
  • From: Timothy Redaelli <tredaelli@xxxxxxxxxx>
• [PATCH v7 1/2] leds: fix Kconfig text for MLXCPLD and SYSCON
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• [PATCH v7 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• [PATCH v7 0/2] Introduce mlxreg LED driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [patch v6 1/1] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• RE: [patch v6 1/1] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [patch v6 1/1] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [patch v6 1/1] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• [patch v6 0/1] Introduce smlxreg LED driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH] led: core: Fix race on software blink cancellation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] led: core: Fix race on software blink cancellation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] led: core: Fix race on software blink cancellation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v3 1/4] backlight: pwm_bl: linear interpolation between brightness-levels
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v3 3/4] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v3 4/4] dt-bindings: pwm-backlight: move brightness-levels to optional.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: pwm-backlight: move brightness-levels to optional.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2 1/4] backlight: pwm_bl: linear interpolation between brightness-levels
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 1/4] backlight: pwm_bl: linear interpolation between brightness-levels
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 3/4] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: pwm-backlight: move brightness-levels to optional.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Samuel Morris <samorris@xxxxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: Migrate documentation for LED subsystem to ReStructured text?
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Migrate documentation for LED subsystem to ReStructured text?
  • From: Matthias Schmitz <matthias@xxxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.9 28/52] led: core: Fix brightness setting when setting delay_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.9 28/52] led: core: Fix brightness setting when setting delay_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• [PATCH AUTOSEL for 4.9 28/52] led: core: Fix brightness setting when setting delay_off=0
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• [PATCH AUTOSEL for 4.4 15/32] led: core: Fix brightness setting when setting delay_off=0
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• [PATCH AUTOSEL for 3.18 11/24] led: core: Fix brightness setting when setting delay_off=0
  • From: Sasha Levin <Alexander.Levin@xxxxxxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Samuel Morris <samorris@xxxxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Samuel Morris <samorris@xxxxxxxxxxx>
• Re: [PATCH v2] leds: Clarify supported chips by LM355x driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v2] leds: Clarify supported chips by LM355x driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/1] leds: leds-mlxcpld: Allow compilation for 32 bit arch
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 1/1] leds: leds-mlxcpld: Allow compilation for 32 bit arch
  • From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Samuel Morris <samorris@xxxxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] leds: use QoS to control LED suspend behavior from userspace
  • From: 0v3rdr0n3@xxxxxxxxx
• [GIT PULL] LED updates for 4.16-rc1
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v1] leds: Clarify supported chips by LM355x driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: pwm-backlight: move brightness-levels to optional.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] led: core: Fix race on software blink cancellation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 3/4] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 3/4] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v2] leds: ledtrig-transient: Add SPDX license identifiers
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: ledtrig-transient: Add SPDX license identifiers
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH v2] leds: ledtrig-transient: Add SPDX license identifiers
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 1/4] backlight: pwm_bl: linear interpolation between brightness-levels
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: pwm-backlight: add a num-interpolation-steps property.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 4/4] dt-bindings: pwm-backlight: move brightness-levels to optional.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 3/4] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] leds: ledtrig-transient: Add SPDX license identifiers
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH] leds: ledtrig-transient: Add SPDX license identifiers
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [GIT PULL] LED fix for 4.15-rc7
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH] leds: core: Fix regression caused by commit 2b83ff96f51d
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: Add driver for MCP45HV51 (digital potentiometer)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Add driver for MCP45HV51 (digital potentiometer)
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: Add driver for MCP45HV51 (digital potentiometer)
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: Add driver for MCP45HV51 (digital potentiometer)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Add driver for MCP45HV51 (digital potentiometer)
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: Add driver for MCP45HV51 (digital potentiometer)
  • From: Pavel Machek <pavel@xxxxxx>
• Add driver for MCP45HV51 (digital potentiometer)
  • From: Gaëtan Carlier <gcembed@xxxxxxxxx>
• Re: proper framework for meter sink?
  • From: Pavel Machek <pavel@xxxxxx>
• proper framework for meter sink?
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [GIT PULL] LED fix for 4.15-rc6
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] dt: bindings: as3645a: Fix the example node
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] led: core: Fix brightness setting when setting active_off=0
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH v5] leds: trigger: Introduce a NETDEV trigger
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] led: core: Fix brightness setting when setting active_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v5 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v5 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 3/3] DT: leds: Add Qualcomm Light Pulse Generator binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v5 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v5 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v5 6/6] leds: lp8860: Various fixes to align with LED framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v5 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v5 5/6] leds: lp8860: Add DT parsing to retrieve the trigger node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v5 3/6] leds: lp8860: Update the dt parsing for LED labeling
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Doug Anderson <dianders@xxxxxxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RFC v2 1/2] backlight: pwm_bl: linear interpolation between values of brightness-levels
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v4 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [RFC v2 1/2] backlight: pwm_bl: linear interpolation between values of brightness-levels
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v4 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt: bindings: as3645a: Update dt node example with standard
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v11 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH V1 1/4] qcom: spmi-wled: Add support for qcom wled driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RESEND PATCH v2] dt: bindings: as3645a: Fix the example node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC v2 2/2] backlight: pwm_bl: compute brightness of LED linearly to human eye.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RFC v2 1/2] backlight: pwm_bl: linear interpolation between values of brightness-levels
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v4 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v2 1/2] leds: as3645a: Fix quoted string split warning
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [RFC PATCH 2/2] leds: as3645a: Update LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 1/2] leds: as3645a: Fix quoted string split warning
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [RFC PATCH 2/2] leds: as3645a: Update LED label generation
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCH v2 2/2] leds: as3645a: Fix line over 80 characters
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 1/2] leds: as3645a: Fix quoted string split warning
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] led: core: Fix brightness setting when setting active_off=0
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v4 0/6] Updated LP8860 driver series
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [RFC PATCH 1/2] dt: bindings: as3645a: Update dt node example with standard
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt: bindings: as3645a: Update dt node example with standard
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC PATCH 1/2] dt: bindings: as3645a: Update dt node example with standard
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v4 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 0/6] Updated LP8860 driver series
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 5/6] leds: lp8860: Add DT parsing to retrieve the trigger node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 6/6] leds: lp8860: Various fixes to align with LED framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 3/6] leds: lp8860: Update the dt parsing for LED labeling
  • From: Dan Murphy <dmurphy@xxxxxx>
• [RFC PATCH 2/2] leds: as3645a: Update LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] leds: as3645a: Fix checkpatch warnings
  • From: Dan Murphy <dmurphy@xxxxxx>
• [RFC PATCH 1/2] dt: bindings: as3645a: Update dt node example with standard
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3 3/6] leds: lp8860: Update the dt parsing for LED labeling
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3 3/6] leds: lp8860: Update the dt parsing for LED labeling
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v3 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 6/6] leds: lp8860: Various fixes to align with LED framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 3/6] leds: lp8860: Update the dt parsing for LED labeling
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 5/6] leds: lp8860: Add DT parsing to retrieve the trigger node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 1/1] leds: lp8860: Various fixes to align with LED framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3 0/6] Updated LP8860 driver series
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v10 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] led: core: Fix brightness setting when setting active_off=0
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH v5] leds: trigger: Introduce a NETDEV trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v9 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V1 3/4] qcom: spmi-wled: Add support for OVP interrupt handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 2/4] qcom: spmi-wled: Add support for short circuit handling
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V1 1/4] qcom: spmi-wled: Add support for qcom wled driver
  • From: kgunda@xxxxxxxxxxxxxx
• [PATCH v5] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• Re: [PATCH v4] leds: trigger: Introduce a NETDEV trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v4] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• Re: [PATCH v4] leds: trigger: Introduce a NETDEV trigger
  • From: Philippe Ombredanne <pombredanne@xxxxxxxx>
• Re: [PATCH v4] leds: trigger: Introduce a NETDEV trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v4] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• Re: [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RESEND PATCH v2] dt: bindings: as3645a: Fix the example node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [RESEND PATCH v2] dt: bindings: as3645a: Fix the example node
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3] leds: trigger: Introduce a NETDEV trigger
  • From: Philippe Ombredanne <pombredanne@xxxxxxxx>
• Re: [PATCH v3 1/3] leds: core: Introduce generic pattern interface
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] dt: bindings: as3645a: Fix the example node
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3] leds: trigger: Introduce a NETDEV trigger
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt: bindings: as3645a: Fix the example node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• Re: [PATCH v3] leds: trigger: Introduce a NETDEV trigger
  • From: Philippe Ombredanne <pombredanne@xxxxxxxx>
• [PATCH v2] dt: bindings: as3645a: Fix the example node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v3] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• Re: [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• Re: [PATCH] dt: bindings: as3645a: Fix the example node
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] dt: bindings: as3645a: Fix the example node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• [PATCH v8 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 5/6] leds: lp8860: Add DT parsing to retrieve the trigger node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 4/6] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 3/6] leds: lp8860: Update the dt parsing for LED labeling
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 2/6] dt: bindings: lp8860: Update DT label binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 0/6] Updated lp8860 led driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 6/6] leds: lp8860: Various fixes to align with LED framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 1/6] dt: bindings: lp8860: Update bindings for lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: blinkm: avoid uninitialized data use
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] dt: bindings: as3645a: Fix the example node
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6 5/6] leds: lp8860: Update the LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6 5/6] leds: lp8860: Update the LED label generation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v7 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] dt: bindings: as3645a: Fix the example node
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6 4/6] dt: bindings: lp8860: Update the bindings to the standard
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• Re: [PATCH V1 4/4] qcom: spmi-wled: Add auto-calibration logic support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 3/4] qcom: spmi-wled: Add support for OVP interrupt handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 2/4] qcom: spmi-wled: Add support for short circuit handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V1 1/4] qcom: spmi-wled: Add support for qcom wled driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 4/6] dt: bindings: lp8860: Update the bindings to the standard
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/5] dt: bindings: lp8860: Add trigger binding to the lp8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 0/5] Numerous fixes for LP8860
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 5/5] leds: lp8860: Various fixes to align with LED framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 2/5] leds: lp8860: Update the dt parsing for LED labeling
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 4/5] leds: lp8860: Add DT parsing to retrieve the trigger node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 1/5] dt: bindings: lp8860: Update DT label binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] leds: trigger: Introduce a NETDEV trigger
  • From: Ben Whitten <ben.whitten@xxxxxxxxx>
• [PATCH] leds: blinkm: avoid uninitialized data use
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v6 5/6] leds: lp8860: Update the LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6 1/6] leds: Add new API to derive a LED name
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: trigger: Introduce a NETDEV trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v6 4/6] dt: bindings: lp8860: Update the bindings to the standard
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v6 5/6] leds: lp8860: Update the LED label generation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v6 5/6] leds: lp8860: Update the LED label generation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v6 4/6] dt: bindings: lp8860: Update the bindings to the standard
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v6 4/6] dt: bindings: lp8860: Update the bindings to the standard
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v6 1/6] leds: Add new API to derive a LED name
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH/RFC] DT: leds: Fix 'label' property description and add 'colour' property
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH/trivial] ledtrig-activity: Grammar s/a immediate/an immediate/
  • From: Willy Tarreau <w@xxxxxx>
• Re: [PATCH/trivial] ledtrig-activity: Grammar s/a immediate/an immediate/
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v6 5/6] leds: lp8860: Update the LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6 6/6] leds: as3645a: Update the LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v6 5/6] leds: lp8860: Update the LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v6 1/6] leds: Add new API to derive a LED name
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v6 3/6] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v6 2/6] dt: bindings: lm3692x: Add bindings for lm3692x LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v6 4/6] dt: bindings: lp8860: Update the bindings to the standard
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v6 6/6] leds: as3645a: Update the LED label generation
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v5 2/2] leds: lm3692x: Introduce LM3692x dual string driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [GIT PULL] Immutable branch between MFD and LED due for the v4.16 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] leds: pm8058: Silence pointer to integer size warning
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] leds: pm8058: Silence pointer to integer size warning
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] leds: pm8058: Silence pointer to integer size warning
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] leds: pm8058: Silence pointer to integer size warning
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2] leds: pm8058: Silence pointer to integer size warning
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: pm8058: Make ledtype pointer sized type
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>