Update the lp8860 dt binding to the LED standard where
the LED should have a child node and also adding a
LED trigger entry.
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
v6 - New patch to fix binding documentation
Documentation/devicetree/bindings/leds/leds-lp8860.txt | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index aad38dd94d4b..4cf396de6eba 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -12,17 +12,24 @@ Required properties:
- label - Used for naming LEDs
Optional properties:
- - enable-gpio - gpio pin to enable/disable the device.
- - supply - "vled" - LED supply
+ - enable-gpios : gpio pin to enable/disable the device.
+ - vled-supply : LED supply
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
Example:
-leds: leds@6 {
+lp8860@2d {
compatible = "ti,lp8860";
reg = <0x2d>;
- label = "display_cluster";
enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
+
+ backlight: backlight@0 {
+ label = "backlight_cluster";
+ linux,default-trigger = "backlight";
+ };
}
For more product information please see the link below:
--
2.15.0.124.g7668cbc60
