Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH v3 3/4] iio: light: vl6180: Cleanup als_gain lookup, avoid register readback, (continued)
- [PATCH v3 4/4] iio: light: vl6180: Correct ALS scale for non-default gain/integration time,
Stefan Brüns
- [PATCH v3 1/4] iio: light: vl6180: Move range check to integration time setter, cleanup,
Stefan Brüns
- [PATCH v3 0/4] Currently, the vl6180 driver reports bogus in_illuminance_scale values, Stefan Brüns
- [PATCH] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.,
Harinath Nampally
- [PULL] First set of new device support, features and cleanup for IIO in the 4.15 cycle.,
Jonathan Cameron
- [PULL] First set of IIO fixes for the 4.14 cycle.,
Jonathan Cameron
- [PATCH v2 0/4] iio: light: vl6180: Several fixes and enhancements,
Stefan Brüns
- [PATCH 0/2] This patchset is for fixes reported by checkpatch.pl,
Harinath Nampally
- [PATCH 0/2] Remove unnecessary FIFO configurations,
Lorenzo Bianconi
- [PATCH 0/3] iio: adc: twl4030: Fix some error handling issues in 'twl4030_madc_probe()',
Christophe JAILLET
- [PATCH v6 1/2] iio: dac: ds4422/ds4424 dac driver,
Ismail H. Kose
- [PATCH 0/3] AUXADC: Mediatek auxadc driver for mt2712,
Zhiyong Tao
- [RFC PATCH v5 0/6] i2c: document DMA handling and add helpers for it,
Wolfram Sang
- [RFC PATCH 0/7] AXP803 AC/Battery support,
Icenowy Zheng
- Re: GPIO Configuration for IIO-HWMON Channel,
Patrick Venture
- [PATCH 0/4] iio: light: vl6180: Several fixes and enhancements,
Stefan Brüns
- [PATCH v2] staging: iio: Replace bit shifting with BIT macro,
Haneen Mohammed
- [PATCH] Staging: iio: meter: ade7759: update locking method for write frequency,
Katie Dunne
- [PATCH] iio: imu: st_lsm6dsx: set sensor->odr value just in st_lsm6dsx_write_raw(), Lorenzo Bianconi
- [PATCH] iio: adc: stm32: fix bad error check on max_channels,
Fabrice Gasnier
- [PATCH 0/4] platform/chrome: Support for cros_ec_accel_legacy driver,
Thierry Escande
- [PATCH 0/3] iio: trigger: stm32-timers fixes,
Fabrice Gasnier
- [PATCH] staging: iio: ade7753: replace mlock with driver private lock,
Himanshi Jain
- [PATCH 0/4] Add support to LIS3DHH accel sensor,
Lorenzo Bianconi
- [PATCH 0/3] add SPI-3wire support to ST gyro/magn/pressure framework,
Lorenzo Bianconi
- [PATCH v3 0/8] iio: accel: kxcjk1003: support Kionix KXTF9,
Michał Mirosław
- [PATCH v3 1/8] iio: accel: kxcjk1003: refactor ODR setting, Michał Mirosław
- [PATCH v3 3/8] iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler, Michał Mirosław
- [PATCH v3 2/8] iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names, Michał Mirosław
- [PATCH v3 4/8] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic, Michał Mirosław
- [PATCH v3 5/8] iio: accel: kxcjk1013: make sampling_frequency_avail per-type, Michał Mirosław
- [PATCH v3 6/8] iio: accel: kxcjk1013: add support for KXTF9, Michał Mirosław
- [PATCH v3 7/8] iio: accel: kxcjk1013: remove unused platform data struct, Michał Mirosław
- [PATCH v3 8/8] iio: accel: kxcjk1013: drop variation number from driver's name, Michał Mirosław
- Re: [PATCH v3 0/8] iio: accel: kxcjk1003: support Kionix KXTF9, Jonathan Cameron
- Re: [PATCH v3 0/8] iio: accel: kxcjk1003: support Kionix KXTF9, Srinivas Pandruvada
- [PATCH] iio: cros_ec: Remove unused variable,
Paolo Cretaro
- [PATCH] iio: dac: ds4422/ds4424 dac driver,
Ismail Kose
- [PATCH v4 0/6] IIO-based thermal sensor driver for Allwinner H3 SoC,
Icenowy Zheng
- [PATCH] staging: iio: ad7192: Use the dedicated reset function,
Stefan Popa
- [PATCH] staging: iio: ade7759: fix signed extension bug on shift of a u8,
Colin King
- [PATCH v2 0/2] Rewrite the IIO_DEVICE_ATTR_NAMED API to pass name as string.,
Himanshi Jain
- [PATCH 0/2] Rewrite the IIO_DEVICE_ATTR_NAMED API to pass name as string.,
Himanshi Jain
- [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names,
Himanshi Jain
- [PATCH] iio: adc: dln2-adc: initialize local struct before using it,
Martin Kepplinger
- [PATCH v6] iio: accel: mma8452: improvements to handle multiple events,
Harinath Nampally
- [PATCH v2 0/6] IIO driver for MCP3550/1/3,
Lukas Wunner
- [PATCH v1 00/10] Various patches for SAMA5D2 backup mode,
Romain Izard
- [PATCH v1 04/10] mtd: nand: atmel: Avoid ECC errors when leaving backup mode, Romain Izard
- [PATCH v1 08/10] pwm: atmel-tcb: Support backup mode, Romain Izard
- [PATCH v1 07/10] iio:adc:at91-sama5d2: Support backup mode, Romain Izard
- [PATCH v1 09/10] atmel_flexcom: Support backup mode, Romain Izard
- [PATCH v1 10/10] tty/serial: atmel: Prevent a warning on suspend, Romain Izard
- [PATCH v1 05/10] mtd: nand: atmel: Report PMECC failures as errors, Romain Izard
- [PATCH v1 06/10] ehci-atmel: Power down during suspend is normal, Romain Izard
- [PATCH v1 01/10] clk: at91: pmc: Wait for clocks when resuming, Romain Izard
- [PATCH v1 03/10] clk: at91: pmc: Support backup for programmable clocks, Romain Izard
- [PATCH v1 02/10] clk: at91: pmc: Save SCSR during suspend, Romain Izard
- [PATCH] Staging: iio: adc: Added Space around binary op.,
Himanshi Jain
- [PATCH v3] iio: chemical: ccs811: Add support for data ready trigger,
Narcisa Ana Maria Vasile
- [PATCH] iio: stm32: fix adc/trigger link error,
Arnd Bergmann
- [PATCH] iio: core: Return error for failed read_reg,
Lars-Peter Clausen
- [PATCH 2/2] iio: ad7793: Fix the serial interface reset,
Dragos Bogdan
- [PATCH 1/2] iio: ad_sigma_delta: Implement a dedicated reset function,
Dragos Bogdan
- [PATCH 1/2] iio: dac: ad5446: Add IDs of compatible Texas Instruments chips,
Lukas Wunner
- [PATCH 1/2] dt-bindings: iio: dac: ti-dac082s085: Document new driver,
Lukas Wunner
- [PATCH] iio:ad7793: Fix the serial interface reset,
Dragos Bogdan
- [PATCH 0/2] Add support to LPS33HW and LPS35HW pressure sensors,
Lorenzo Bianconi
- [PATCH 5/5] lmp92001: mfd: doc: Add support LMP92001,
s . abhisit
- [PATCH 3/5] lmp92001: mfd: iio: dac: Add support LMP92001,
s . abhisit
- [PATCH 2/5] lmp92001: mfd: iio: adc: Add support LMP92001,
s . abhisit
- [PATCH v3 0/5] Add support to LIS2DW12 accel sensor,
Lorenzo Bianconi
- [PATCH] iio: imu: inv_mpu6050: make arrays hz and d static,
Colin King
- [PATCH] iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL,
Lorenzo Bianconi
- [PATCH] IIO: BME280: Updates to Humidity readings need ctrl_reg write!,
Colin Parker
- [RESEND PATCH v3 0/9] Add STM32 LPTimer: PWM, trigger and counter,
Fabrice Gasnier
- [RESEND PATCH v3 8/9] iio: counter: Add support for STM32 LPTimer, Fabrice Gasnier
- [RESEND PATCH v3 6/9] iio: trigger: Add STM32 LPTimer trigger driver, Fabrice Gasnier
- [RESEND PATCH v3 9/9] iio: adc: stm32: add support for lptimer triggers, Fabrice Gasnier
- [RESEND PATCH v3 1/9] dt-bindings: mfd: Add STM32 LPTimer binding, Fabrice Gasnier
- [RESEND PATCH v3 4/9] pwm: Add STM32 LPTimer PWM driver, Fabrice Gasnier
- [RESEND PATCH v3 7/9] dt-bindings: iio: Add STM32 LPTimer quadrature encoder and counter, Fabrice Gasnier
- [RESEND PATCH v3 2/9] mfd: Add STM32 LPTimer driver, Fabrice Gasnier
- [RESEND PATCH v3 5/9] dt-bindings: iio: Add STM32 LPTimer trigger binding, Fabrice Gasnier
- [RESEND PATCH v3 3/9] dt-bindings: pwm: Add STM32 LPTimer PWM binding, Fabrice Gasnier
- [GIT PULL] Immutable branch between MFD, IIO and PWM due for the v4.14 merge window, Lee Jones
- [PATCH v5] iio: accel: mma8452: improvements to handle multiple events,
Harinath Nampally
[PATCH] iio: multiplexer: check memory allocation failure,
Christophe JAILLET
Offline (more or less) until 3rd September.,
Jonathan Cameron
[PATCH] IIO: BME280: Humidity: Changes to the humidity ctrl_hum require a write to ctrl_meas.,
Colin Parker
[PATCH v2] iio: chemical: ccs811: Add support for data ready trigger,
Narcisa Ana Maria Vasile
[PATCH 2/2] iio: adc: ti-ads1015: add 10% to conversion wait time,
Ladislav Michl
[PATCH 1/2] iio: adc: ti-ads1015: write config register only on change,
Ladislav Michl
[PATCH] iio: adc: ti-ads1015: fix comparator polarity setting,
Akinobu Mita
[PATCH] iio: imu: inv_mpu6050: fix missing break in switch,
Gustavo A. R. Silva
[PATCH 0/6] IIO driver for MCP3550/1/3,
Lukas Wunner
[PATCH] mfd: Add support for TI LMP92001,
s . abhisit
Re: [PATCH] mfd: Add support for TI LMP92001, Jonathan Cameron
Re: [PATCH] mfd: Add support for TI LMP92001, kbuild test robot
Re: [PATCH] mfd: Add support for TI LMP92001, Rob Herring
[PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9,
Michał Mirosław
[PATCH 4/4] staging: iio: tsl2x7x: constify i2c_device_id,
Arvind Yadav
[PATCH] iio staging: tsl2x7x: clean up limit checks,
Dan Carpenter
[PATCH v4] iio: accel: mma8452: improvements to handle multiple events,
Harinath Nampally
[PULL] Second set of new device support, features and cleanups for IIO in the 4.14 cycle.,
Jonathan Cameron
[PATCH] iio: accel: mma8452: code improvements to handle more than one event,
Harinath Nampally
[PULL] Second set of IIO fixes for the 4.13 cycle.,
Jonathan Cameron
[PATCH 0/3] constify iio i2c_device_id,
Arvind Yadav
Possible race in xilinx-xadc.ko,
Anton Volkov
[PATCH v4 0/5] iio: srf08: add support for similar devices and triggered buffers,
Andreas Klinger
[PATCH v4 3/5] iio: srf08: add triggered buffer support, Andreas Klinger
[PATCH v4 4/5] iio: srf08: add sensor type srf10, Andreas Klinger
[PATCH v4 5/5] iio: srf08: add support for srf02 in i2c mode, Andreas Klinger
[PATCH v4 2/5] iio: srf08: add device tree table, Andreas Klinger
[PATCH v4 1/5] iio: srf08: add device tree binding for srf02 and srf10,
Andreas Klinger
[PATCH v2 0/5] Add support to LIS2DW12 accel sensor,
Lorenzo Bianconi
[PATCH 0/6] iio: accel: kxcjk1003: support Kionix KXTF9,
Michał Mirosław
[RFC PATCH v4 0/6] i2c: document DMA handling and add helpers for it,
Wolfram Sang
[PATCH 0/4] iio: magnetometer: ak8974: support AMI306,
Michał Mirosław
[PATCH] iio: chemical: ccs811: Add support for data ready trigger,
Narcisa Ana Maria Vasile
[PATCH v2] iio: chemical: ccs811: Add triggered buffer support,
Narcisa Ana Maria Vasile
[PATCH v3 0/5] iio: srf08: add support for similar devices and triggered buffers,
Andreas Klinger
[PATCH v3 3/5] iio: srf08: add triggered buffer support,
Andreas Klinger
[PATCH v3 5/5] iio: srf08: add support for srf02 in i2c mode, Andreas Klinger
[PATCH v3 4/5] iio: srf08: add sensor type srf10,
Andreas Klinger
[PATCH v3 2/5] iio: srf08: add device tree table,
Andreas Klinger
[PATCH v3 1/5] iio: srf08: add device tree binding for srf02 and srf10,
Andreas Klinger
[PATCH 0/5] Add support to LIS2DW12 accel sensor,
Lorenzo Bianconi
[PATCH 0/4] Add support to LIS2MDL magnetometer sensor,
Lorenzo Bianconi
[PATCH] iio: adc: select triggered buffer for sama5d2 adc,
Arnd Bergmann
[PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.,
Harinath Nampally
[PATCH v2 5/5] iio: srf08: add support for srf02 in i2c mode,
Andreas Klinger
[PATCH v2 4/5] iio: srf08: add sensor type srf10, Andreas Klinger
[PATCH v2 3/5] iio: srf08: add triggered buffer support,
Andreas Klinger
[PATCH v2 2/5] iio: srf08: add device tree table, Andreas Klinger
[PATCH v2 1/5] iio: srf08: add device tree binding for srf02 and srf10,
Andreas Klinger
[PATCH v2 0/5] iio: srf08: add support for similar devices and triggered buffers, Andreas Klinger
[PATCH] HID: sensor: constify platform_device_id,
Arvind Yadav
[PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors,
Srinivas Pandruvada
[PATCH 0/2] iio: st_sensors: fix data-ready pin configuration,
Lorenzo Bianconi
[PATCH v2 0/8] platform/chrome: cros_ec: Fixes and improvements,
Thierry Escande
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
