The following changes since commit a575de2da5e20c31f4ffcb1df555c199ad77fc20:
staging: rtlwifi: Reviewers fixes (2017-08-20 11:13:12 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-4.14a
for you to fetch changes up to f790923f146140a261ad211e5baf75d169f16fb2:
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack. (2017-09-24 16:58:37 +0100)
----------------------------------------------------------------
First round of IIO fixes for the 4.14 cycle
Note this includes fixes from recent merge window. As such the tree
is based on top of a prior staging/staging-next tree.
* iio core
- return and error for a failed read_reg debugfs call rather than
eating the error.
* ad7192
- Use the dedicated reset function in the ad_sigma_delta library
instead of an spi transfer with the data on the stack which
could cause problems with DMA.
* ad7793
- Implement a dedicate reset function in the ad_sigma_delta library
and use it to correctly reset this part.
* bme280
- ctrl_reg write must occur after any register writes
for updates to take effect.
* mcp320x
- negative voltage readout was broken.
- Fix an oops on module unload due to spi_set_drvdata not being called
in probe.
* st_magn
- Fix the data ready line configuration for the lis3mdl. It is not
configurable so the st_magn core was assuming it didn't exist
and so wasn't consuming interrupts resulting in an unhandled
interrupt.
* stm32-adc
- off by one error on max channels checking.
* stm32-timer
- preset should not be buffered - reorganising register writes avoids
this.
- fix a corner case in which write preset goes wrong when a timer is
used first as a trigger then as a counter with preset. Odd case but
you never know.
* ti-ads1015
- Fix setting of comparator polarity by fixing bitfield definition.
* twl4030
- Error path handling fix to cleanup in event of regulator
registration failure.
- Disable the vusb3v1 regulator correctly in error handling
- Don't paper over a regulator enable failure.
----------------------------------------------------------------
Akinobu Mita (1):
iio: adc: ti-ads1015: fix comparator polarity setting
Christophe JAILLET (3):
iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()'
Colin Parker (1):
IIO: BME280: Updates to Humidity readings need ctrl_reg write!
Dragos Bogdan (2):
iio: ad_sigma_delta: Implement a dedicated reset function
iio: ad7793: Fix the serial interface reset
Fabrice Gasnier (3):
iio: trigger: stm32-timer: preset shouldn't be buffered
iio: trigger: stm32-timer: fix a corner case to write preset
iio: adc: stm32: fix bad error check on max_channels
Lorenzo Bianconi (1):
iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL
Lukas Wunner (2):
iio: adc: mcp320x: Fix oops on module unload
iio: adc: mcp320x: Fix readout of negative voltages
Matt Fornero (1):
iio: core: Return error for failed read_reg
Stefan Popa (1):
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
drivers/iio/adc/ad7793.c | 4 ++--
drivers/iio/adc/ad_sigma_delta.c | 28 +++++++++++++++++++++++++
drivers/iio/adc/mcp320x.c | 25 ++++++++++++++--------
drivers/iio/adc/stm32-adc.c | 2 +-
drivers/iio/adc/ti-ads1015.c | 8 ++++---
drivers/iio/adc/twl4030-madc.c | 14 +++++++++----
drivers/iio/common/st_sensors/st_sensors_core.c | 11 +++++++++-
drivers/iio/industrialio-core.c | 4 +++-
drivers/iio/magnetometer/st_magn_core.c | 4 ++++
drivers/iio/pressure/bmp280-core.c | 2 +-
drivers/iio/trigger/stm32-timer-trigger.c | 4 +++-
drivers/staging/iio/adc/ad7192.c | 4 +---
include/linux/iio/adc/ad_sigma_delta.h | 3 +++
13 files changed, 87 insertions(+), 26 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
