Re: [PATCH v3 6/8] iio: accel: kxcjk1013: add support for KXTF9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 17 Sep 2017 17:01:04 +0200
Michał Mirosław <mirq-linux@xxxxxxxxxxxx> wrote:

> KXTF9 has mostly compatible register layout to KXCJK accelerometer.
> There is no motion direction interrupt support, but there is tap
> direction detection instead (not implemented in this patch).
> 
> Signed-off-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>

A minor point inline where you are using the or of two bits when
GENMASK is more appropriate.

Jonathan

> ---
>  drivers/iio/accel/Kconfig      |   4 +-
>  drivers/iio/accel/kxcjk-1013.c | 115 ++++++++++++++++++++++++++++++++++++-----
>  2 files changed, 104 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 15de262015df..0be352a7b6f4 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -219,8 +219,8 @@ config KXCJK1013
>  	select IIO_TRIGGERED_BUFFER
>  	help
>  	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
> -	  triaxial acceleration sensor. This driver also supports KXCJ9-1008
> -	  and KXTJ2-1009.
> +	  triaxial acceleration sensor. This driver also supports KXCJ9-1008,
> +	  KXTJ2-1009 and KXTF9.
>  
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called kxcjk-1013.
> diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
> index 4e8919d48635..8892dc5d2422 100644
> --- a/drivers/iio/accel/kxcjk-1013.c
> +++ b/drivers/iio/accel/kxcjk-1013.c
> @@ -34,6 +34,13 @@
>  #define KXCJK1013_DRV_NAME "kxcjk1013"
>  #define KXCJK1013_IRQ_NAME "kxcjk1013_event"
>  
> +#define KXTF9_REG_HP_XOUT_L		0x00
> +#define KXTF9_REG_HP_XOUT_H		0x01
> +#define KXTF9_REG_HP_YOUT_L		0x02
> +#define KXTF9_REG_HP_YOUT_H		0x03
> +#define KXTF9_REG_HP_ZOUT_L		0x04
> +#define KXTF9_REG_HP_ZOUT_H		0x05
> +
>  #define KXCJK1013_REG_XOUT_L		0x06
>  /*
>   * From low byte X axis register, all the other addresses of Y and Z can be
> @@ -48,17 +55,33 @@
>  
>  #define KXCJK1013_REG_DCST_RESP		0x0C
>  #define KXCJK1013_REG_WHO_AM_I		0x0F
> -#define KXCJK1013_REG_INT_SRC1		0x16
> +#define KXTF9_REG_TILT_POS_CUR		0x10
> +#define KXTF9_REG_TILT_POS_PREV		0x11
> +#define KXTF9_REG_INT_SRC1		0x15
> +#define KXCJK1013_REG_INT_SRC1		0x16	/* compatible, but called INT_SRC2 in KXTF9 ds */
>  #define KXCJK1013_REG_INT_SRC2		0x17
>  #define KXCJK1013_REG_STATUS_REG	0x18
>  #define KXCJK1013_REG_INT_REL		0x1A
>  #define KXCJK1013_REG_CTRL1		0x1B
> -#define KXCJK1013_REG_CTRL2		0x1D
> +#define KXTF9_REG_CTRL2			0x1C
> +#define KXCJK1013_REG_CTRL2		0x1D	/* mostly compatible, CTRL_REG3 in KTXF9 ds */
>  #define KXCJK1013_REG_INT_CTRL1		0x1E
>  #define KXCJK1013_REG_INT_CTRL2		0x1F
> +#define KXTF9_REG_INT_CTRL3		0x20
>  #define KXCJK1013_REG_DATA_CTRL		0x21
> +#define KXTF9_REG_TILT_TIMER		0x28
>  #define KXCJK1013_REG_WAKE_TIMER	0x29
> +#define KXTF9_REG_TDT_TIMER		0x2B
> +#define KXTF9_REG_TDT_THRESH_H		0x2C
> +#define KXTF9_REG_TDT_THRESH_L		0x2D
> +#define KXTF9_REG_TDT_TAP_TIMER		0x2E
> +#define KXTF9_REG_TDT_TOTAL_TIMER	0x2F
> +#define KXTF9_REG_TDT_LATENCY_TIMER	0x30
> +#define KXTF9_REG_TDT_WINDOW_TIMER	0x31
>  #define KXCJK1013_REG_SELF_TEST		0x3A
> +#define KXTF9_REG_WAKE_THRESH		0x5A
> +#define KXTF9_REG_TILT_ANGLE		0x5C
> +#define KXTF9_REG_HYST_SET		0x5F
>  #define KXCJK1013_REG_WAKE_THRES	0x6A
>  
>  #define KXCJK1013_REG_CTRL1_BIT_PC1	BIT(7)
> @@ -68,18 +91,32 @@
>  #define KXCJK1013_REG_CTRL1_BIT_GSEL0	BIT(3)
>  #define KXCJK1013_REG_CTRL1_BIT_WUFE	BIT(1)
>  
> +#define KXCJK1013_REG_INT_CTRL1_BIT_IEU	BIT(2)	/* KXTF9 */
>  #define KXCJK1013_REG_INT_CTRL1_BIT_IEL	BIT(3)
>  #define KXCJK1013_REG_INT_CTRL1_BIT_IEA	BIT(4)
>  #define KXCJK1013_REG_INT_CTRL1_BIT_IEN	BIT(5)
>  
> +#define KXTF9_REG_TILT_BIT_LEFT_EDGE	BIT(5)
> +#define KXTF9_REG_TILT_BIT_RIGHT_EDGE	BIT(4)
> +#define KXTF9_REG_TILT_BIT_LOWER_EDGE	BIT(3)
> +#define KXTF9_REG_TILT_BIT_UPPER_EDGE	BIT(2)
> +#define KXTF9_REG_TILT_BIT_FACE_DOWN	BIT(1)
> +#define KXTF9_REG_TILT_BIT_FACE_UP	BIT(0)
> +
>  #define KXCJK1013_DATA_MASK_12_BIT	0x0FFF
>  #define KXCJK1013_MAX_STARTUP_TIME_US	100000
>  
>  #define KXCJK1013_SLEEP_DELAY_MS	2000
>  
> +#define KXCJK1013_REG_INT_SRC1_BIT_TPS	BIT(0)	/* KXTF9 */
>  #define KXCJK1013_REG_INT_SRC1_BIT_WUFS	BIT(1)
> +#define KXCJK1013_REG_INT_SRC1_MASK_TDTS	(BIT(2) | BIT(3))	/* KXTF9 */

GENMASK(3,2)

> +#define KXCJK1013_REG_INT_SRC1_TAP_NONE		0
> +#define KXCJK1013_REG_INT_SRC1_TAP_SINGLE		BIT(2)
> +#define KXCJK1013_REG_INT_SRC1_TAP_DOUBLE		BIT(3)
>  #define KXCJK1013_REG_INT_SRC1_BIT_DRDY	BIT(4)
>  
> +/* KXCJK: INT_SOURCE2: motion detect, KXTF9: INT_SRC_REG1: tap detect */
>  #define KXCJK1013_REG_INT_SRC2_BIT_ZP	BIT(0)
>  #define KXCJK1013_REG_INT_SRC2_BIT_ZN	BIT(1)
>  #define KXCJK1013_REG_INT_SRC2_BIT_YP	BIT(2)
> @@ -93,6 +130,7 @@ enum kx_chipset {
>  	KXCJK1013,
>  	KXCJ91008,
>  	KXTJ21009,
> +	KXTF9,
>  	KX_MAX_CHIPS /* this must be last */
>  };
>  
> @@ -158,6 +196,18 @@ static const struct kx_odr_map samp_freq_table[] = {
>  static const char *const kxcjk1013_samp_freq_avail =
>  	"0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600";
>  
> +static const struct kx_odr_map kxtf9_samp_freq_table[] = {
> +	{ 25, 0, 0x01, 0x00 },
> +	{ 50, 0, 0x02, 0x01 },
> +	{ 100, 0, 0x03, 0x01 },
> +	{ 200, 0, 0x04, 0x01 },
> +	{ 400, 0, 0x05, 0x01 },
> +	{ 800, 0, 0x06, 0x01 },
> +};
> +
> +static const char *const kxtf9_samp_freq_avail =
> +	"25 50 100 200 400 800";
> +
>  /* Refer to section 4 of the specification */
>  static const struct {
>  	int odr_bits;
> @@ -208,6 +258,15 @@ static const struct {
>  		{0x06, 3000},
>  		{0x07, 2000},
>  	},
> +	/* KXTF9 */
> +	{
> +		{0x01, 81000},
> +		{0x02, 41000},
> +		{0x03, 21000},
> +		{0x04, 11000},
> +		{0x05, 5100},
> +		{0x06, 2700},
> +	},
>  };
>  
>  static const struct {
> @@ -404,7 +463,7 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
>  
>  static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
>  {
> -	int ret;
> +	int waketh_reg, ret;
>  
>  	ret = i2c_smbus_write_byte_data(data->client,
>  					KXCJK1013_REG_WAKE_TIMER,
> @@ -415,8 +474,9 @@ static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
>  		return ret;
>  	}
>  
> -	ret = i2c_smbus_write_byte_data(data->client,
> -					KXCJK1013_REG_WAKE_THRES,
> +	waketh_reg = data->chipset == KXTF9 ?
> +		KXTF9_REG_WAKE_THRESH : KXCJK1013_REG_WAKE_THRES;
> +	ret = i2c_smbus_write_byte_data(data->client, waketh_reg,
>  					data->wake_thres);
>  	if (ret < 0) {
>  		dev_err(&data->client->dev, "Error writing reg_wake_thres\n");
> @@ -590,9 +650,14 @@ static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
>  	if (ret < 0)
>  		return ret;
>  
> -	odr_setting = kxcjk1013_find_odr_value(samp_freq_table,
> -					       ARRAY_SIZE(samp_freq_table),
> -					       val, val2);
> +	if (data->chipset == KXTF9)
> +		odr_setting = kxcjk1013_find_odr_value(kxtf9_samp_freq_table,
> +						       ARRAY_SIZE(kxtf9_samp_freq_table),
> +						       val, val2);
> +	else
> +		odr_setting = kxcjk1013_find_odr_value(samp_freq_table,
> +						       ARRAY_SIZE(samp_freq_table),
> +						       val, val2);
>  
>  	if (IS_ERR(odr_setting))
>  		return PTR_ERR(odr_setting);
> @@ -629,9 +694,14 @@ static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
>  
>  static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2)
>  {
> -	return kxcjk1013_convert_odr_value(samp_freq_table,
> -					   ARRAY_SIZE(samp_freq_table),
> -					   data->odr_bits, val, val2);
> +	if (data->chipset == KXTF9)
> +		return kxcjk1013_convert_odr_value(kxtf9_samp_freq_table,
> +						   ARRAY_SIZE(kxtf9_samp_freq_table),
> +						   data->odr_bits, val, val2);
> +	else
> +		return kxcjk1013_convert_odr_value(samp_freq_table,
> +						   ARRAY_SIZE(samp_freq_table),
> +						   data->odr_bits, val, val2);
>  }
>  
>  static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis)
> @@ -886,7 +956,16 @@ static ssize_t kxcjk1013_get_samp_freq_avail(struct device *dev,
>  					     struct device_attribute *attr,
>  					     char *buf)
>  {
> -	return sprintf(buf, "%s\n", kxcjk1013_samp_freq_avail);
> +	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> +	struct kxcjk1013_data *data = iio_priv(indio_dev);
> +	const char *str;
> +
> +	if (data->chipset == KXTF9)
> +		str = kxtf9_samp_freq_avail;
> +	else
> +		str = kxcjk1013_samp_freq_avail;
> +
> +	return sprintf(buf, "%s\n", str);
>  }
>  
>  static IIO_DEVICE_ATTR(in_accel_sampling_frequency_available, S_IRUGO,
> @@ -1121,7 +1200,16 @@ static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
>  	}
>  
>  	if (ret & KXCJK1013_REG_INT_SRC1_BIT_WUFS) {
> -		kxcjk1013_report_motion_event(indio_dev);
> +		if (data->chipset == KXTF9)
> +			iio_push_event(indio_dev,
> +				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
> +				       0,
> +				       IIO_MOD_X_AND_Y_AND_Z,
> +				       IIO_EV_TYPE_THRESH,
> +				       IIO_EV_DIR_RISING),
> +				       data->timestamp);
> +		else
> +			kxcjk1013_report_motion_event(indio_dev);
>  	}
>  
>  ack_intr:
> @@ -1414,6 +1502,7 @@ static const struct i2c_device_id kxcjk1013_id[] = {
>  	{"kxcjk1013", KXCJK1013},
>  	{"kxcj91008", KXCJ91008},
>  	{"kxtj21009", KXTJ21009},
> +	{"kxtf9",     KXTF9},
>  	{"SMO8500",   KXCJ91008},
>  	{}
>  };

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux