Re: [linux-sunxi] Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 18, 2017 at 03:47:25PM +0000, icenowy@xxxxxxx wrote:
> 在 2017-09-18 16:30,Maxime Ripard 写道:
> > On Mon, Sep 18, 2017 at 03:36:43PM +0800, Icenowy Zheng wrote:
> > > 于 2017年9月18日 GMT+08:00 下午3:33:36, Maxime Ripard
> > > <maxime.ripard@xxxxxxxxxxxxxxxxxx> 写到:
> > > >On Thu, Sep 14, 2017 at 10:52:46PM +0800, Icenowy Zheng wrote:
> > > >> Allwinner H3 features a thermal sensor like the one in A33, but has
> > > >its
> > > >> register re-arranged, the clock divider moved to CCU (originally the
> > > >> clock divider is in ADC) and added a pair of bus clock and reset.
> > > >>
> > > >> Update the binding document to cover H3.
> > > >>
> > > >> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> > > >> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
> > > >> ---
> > > >> Changes in v4:
> > > >> - Add nvmem calibration data (not yet used by the driver)
> > > >> Changes in v3:
> > > >> - Clock name changes.
> > > >> - Example node name changes.
> > > >> - Add interupts (not yet used by the driver).
> > > >>
> > > >>  .../devicetree/bindings/mfd/sun4i-gpadc.txt        | 30
> > > >++++++++++++++++++++--
> > > >>  1 file changed, 28 insertions(+), 2 deletions(-)
> > > >>
> > > >> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >> index badff3611a98..6c470d584bf9 100644
> > > >> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >> @@ -4,12 +4,26 @@ The Allwinner SoCs all have an ADC that can also
> > > >act as a thermal sensor
> > > >>  and sometimes as a touchscreen controller.
> > > >>
> > > >>  Required properties:
> > > >> -  - compatible: "allwinner,sun8i-a33-ths",
> > > >> +  - compatible: must contain one of the following compatibles:
> > > >> +		- "allwinner,sun8i-a33-ths"
> > > >> +		- "allwinner,sun8i-h3-ths"
> > > >>    - reg: mmio address range of the chip,
> > > >>    - #thermal-sensor-cells: shall be 0,
> > > >>    - #io-channel-cells: shall be 0,
> > > >>
> > > >> -Example:
> > > >> +Optional properties:
> > > >> +  - nvmem-cells: A phandle to the calibration data provided by a
> > > >nvmem device.
> > > >> +                 If unspecified default values shall be used.
> > > >> +  - nvmem-cell-names: Should be "calibration-data"
> > > >
> > > >I'd prefer to have which sensor it applies to here. It wouldn't change
> > > >anything for the H3, but it definitely does for example for the A83t
> > > >that has two sensors, one for each cluster, and one for the GPU, each
> > > >with calibration data.
> > > >
> > > >What about cluster0-calibration?
> 
> I prefer sensor0-calibration to sensor3-calibration now.
> (Theortically the new generation THS can support up to 4 sensors)

The mapping that explains what sensor0 means can change in the
future. It's better to be explicit here, and just say upfront what
it's about.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux