Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- [PATCH] iio: hid: Add temperature sensor support,
Song Hongyan
- [PATCH] Staging: iio: resolver: ad2s1210.c - style fix,
Derek Robson
- [PATCH] iio: adc: handle unknow of_device_id data,
Arnd Bergmann
- [RFC] Resolving "false positive" error message from checkpatch.pl,
Slawomir Stepien
- [PATCH v2 0/2] iio: pressure: do not rely on structure field ordering,
Peter Rosin
- [PULL] 3rd set of IIO new device support, features and cleanups for the 4.11 cycle.,
Jonathan Cameron
- [PATCH 0/2] iio: pressure: do not rely on structure field ordering,
Peter Rosin
- [PATCH 2/2] iio: pressure: mpl115: do not rely on structure field ordering, Peter Rosin
- Re: [PATCH 0/2] iio: pressure: do not rely on structure field ordering, Lars-Peter Clausen
[PATCH v2] iio: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8,
William Breathitt Gray
kernel 4.10-rcx iio helper question,
Ken.Lin
Re: kernel 4.10-rcx iio helper question, Jonathan Cameron
Message not available
[PATCH v3 2/2] iio: distance: add devantech us ranger srf04,
Andreas Klinger
[PATCH v3 0/2] iio: distance: devantech srf04 us ranger, Andreas Klinger
[PATCH v3 1/2] iio: distance: add dt binding for devantech-srf04,
Andreas Klinger
[PATCH 3/3 v4] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC,
Linus Walleij
Re: [PATCH] input: misc: delete MPU3050 driver,
Linus Walleij
[PATCH v2] iio: accel: Add driver for the Analog Devices ADXL345 3-axis accelerometer,
Eva Rachel Retuya
[PATCH v6 1/5] devicetree: mfd: Add binding for the TI LM3533,
Bjorn Andersson
[PATCH] iio: stx104: Add support for GPIO names,
William Breathitt Gray
[PATCH v3] iio: cros_ec_light_prox: add ChromeOS EC Light and Proximity Sensors,
Enric Balletbo i Serra
[PATCH v2 0/5] Add EXTI GPIO trigger support to STM32 ADC,
Fabrice Gasnier
[PATCH 0/5] Add EXTI GPIO trigger support to STM32 ADC,
Fabrice Gasnier
[PATCH] iio: stx104: Remove unneeded struct stx104_dev code,
William Breathitt Gray
[PATCH v2 2/2] iio: distance: add devantech us ranger srf04,
Andreas Klinger
[PATCH v2 1/2] iio: distance: add dt binding for devantech-srf04, Andreas Klinger
[PATCH v2 0/2] iio: distance: devantech srf04 us ranger, Andreas Klinger
[PATCH] iio: adc - Fix possible NULL derefrence.,
Shailendra Verma
[PATCH v13 0/5] mxs-lradc: Split driver into MFD,
Ksenija Stanojevic
[PATCH 0/5] add support to LSM6DS3H and LSM6DSL,
Lorenzo Bianconi
[PATCH 2/2] iio: distance: add devantech us ranger srf04,
Andreas Klinger
[PATCH 1/2] iio: distance: add dt binding for devantech-srf04,
Andreas Klinger
[PATCH 0/2] iio: distance: devantech srf04 us ranger, Andreas Klinger
Re: [PATCH] Staging: iio: adc: fix symbolic permissions coding style issue, Jonathan Cameron
Re: [PATCH] Documentation: dt-bindings: tmp007: Add optional interrupt support,
Jonathan Cameron
[PATCH v2 00/25] add support for AXP20X and AXP22X power supply drivers,
Quentin Schulz
- Re: [PATCH v2 00/25] add support for AXP20X and AXP22X power supply drivers, Maxime Ripard
- [PATCH v2 07/25] ARM: dtsi: axp22x: add AXP22X ADC subnode, Quentin Schulz
- [PATCH v2 06/25] ARM: dtsi: axp209: add AXP209 ADC subnode, Quentin Schulz
- [PATCH v2 13/25] ARM: dtsi: axp22x: add AC power supply subnode, Quentin Schulz
- [PATCH v2 08/25] dt-bindings: power: supply: add AXP20X/AXP22X AC power supply, Quentin Schulz
- [PATCH v2 11/25] mfd: axp20x: add AC power supply cells for AXP22X PMICs, Quentin Schulz
- [PATCH v2 14/25] ARM: dts: sun8i: sina33: enable ACIN power supply subnode, Quentin Schulz
- [PATCH v2 12/25] ARM: dtsi: axp209: add AC power supply subnode, Quentin Schulz
- [PATCH v2 05/25] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs, Quentin Schulz
- [PATCH v2 09/25] iio: adc: axp20x_adc: map acin_i and acin_v, Quentin Schulz
- [PATCH v2 10/25] power: supply: add AC power supply driver for AXP20X and AXP22X PMICs, Quentin Schulz
- [PATCH v2 02/25] mfd: axp20x: correct name of temperature data ADC registers, Quentin Schulz
- [PATCH v2 01/25] dt-bindings: iio: adc: add AXP20X/AXP22X ADC DT binding, Quentin Schulz
- [PATCH v2 03/25] power: supply: axp20x_usb_power: use IIO channels when available, Quentin Schulz
- [PATCH v2 04/25] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs, Quentin Schulz
- [PATCH v2 17/25] mfd: axp20x: add CHRG_CTRL1/2/3 to writeable regs for AXP20X/AXP22X, Quentin Schulz
- [PATCH v2 16/25] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding, Quentin Schulz
- [PATCH v2 21/25] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver, Quentin Schulz
- [PATCH v2 23/25] ARM: dtsi: axp22x: add battery power supply subnode, Quentin Schulz
- [PATCH v2 19/25] iio: adc: axp20x_adc: map battery IIO channels, Quentin Schulz
- [PATCH v2 25/25] ARM: sun5i: chip: enable battery power supply subnode, Quentin Schulz
- [PATCH v2 18/25] mfd: axp20x: add V_OFF to writeable regs for AXP20X and AXP22X, Quentin Schulz
- [PATCH v2 22/25] ARM: dtsi: axp209: add battery power supply subnode, Quentin Schulz
- [PATCH v2 24/25] ARM: dts: sun8i: sina33: enable battery power supply subnode, Quentin Schulz
- [PATCH v2 15/25] ARM: sun5i: chip: enable ACIN power supply subnode, Quentin Schulz
- [PATCH v2 20/25] power: supply: add battery driver for AXP20X and AXP22X PMICs, Quentin Schulz
[PATCH v4] iio: max5481: Add support for Maxim digital potentiometers,
Slawomir Stepien
[PATCH v2 0/7] Add support for triggered buffer mode to STM32 ADC,
Fabrice Gasnier
[PATCH v4 3/3] iio: distance: srf08: add driver ABI documentation,
Andreas Klinger
[PATCH v4 2/3] iio: distance: srf08: add IIO driver for us ranger,
Andreas Klinger
[PATCH v4 1/3] iio: distance: srf08: add trivial DT binding,
Andreas Klinger
[PATCH v4 0/3] iio: distance: srf08: add IIO driver for us ranger, Andreas Klinger
[RFC] iio: accel: Add driver for the Analog Devices ADXL345 3-axis accelerometer,
Eva Rachel Retuya
[PATCH v2 0/2] iio: health: add MAX30102 oximeter driver support,
Matt Ranostay
[PATCH] iio: stx104: Utilize devm_ functions in driver probe callback,
William Breathitt Gray
[PATCH V8 1/2] iio: adc: Add Renesas GyroADC bindings,
Marek Vasut
[PATCH] iio: cros_ec: Add cros_ec barometer driver,
Enric Balletbo i Serra
[PATCH 0/7] Add STM32 DFSDM support,
Arnaud Pouliquen
[PATCH v2] iio:temperature:tmp007: Add irq and threshold events support,
Manivannan Sadhasivam
[PATCH] drivers:staging:iio:cdc: Style fix.,
Anthony Brandon
[PULL] Second round of IIO new device support, features and cleanup for the 4.11 cycle.,
Jonathan Cameron
[PATCH v2 0/2] iio: imu: st_lsm6dsx: add capability to select interrupt pin,
Lorenzo Bianconi
[PATCH v4 0/3] Amlogic Meson SAR ADC support,
Martin Blumenstingl
[PATCH -next] iio: common: ssp_sensors: gyro: use devm_iio_device_register(),
Wei Yongjun
[PATCH -next] iio: common: ssp_sensors: accel: use devm_iio_device_register(),
Wei Yongjun
[PULL] Second set of IIO fixes for the 4.10 cycle.,
Jonathan Cameron
[PATCH 0/2] iio: imu: st_lsm6dsx: add capability to select interrupt pin,
Lorenzo Bianconi
[PATCH] iio: trigger: close race condition in acquiring trigger reference,
Alison Schofield
[PATCH] iio: adc: constify iio_info structures,
Bhumika Goyal
[PATCH] iio: industrialio-trigger: constify device_type structures,
Bhumika Goyal
[PATCH] iio:temperature:Add irq and threshold events support for TI TMP007 sensor,
Manivannan Sadhasivam
[PATCH 1/2] iio: adc: Add Renesas GyroADC bindings,
Marek Vasut
FOSSASIA Industrial IO talk,
Matt Ranostay
[patch] iio: trigger: clean up viio_trigger_alloc(),
Dan Carpenter
[PATCH] iio: proximity: sx9500: claim direct mode during raw proximity reads,
Alison Schofield
[PATCH] iio: magnetometer: mag3110: claim direct mode during raw writes,
Alison Schofield
[PATCH] iio: pressure: ms5611: claim direct mode during oversampling changes,
Alison Schofield
[PATCH] iio: accel: st_accel: add !SENSORS_LIS3LV02D depedency,
Arnd Bergmann
[PATCH] iio: light: cm3605: mark PM functions as __maybe_unused,
Arnd Bergmann
Why hid-sensor-hub's IIO doesn't work properly in >= 4.3 (possibly badly bisected),
Bastien Nocera
Re: [PATCH v2 0/9] Serial slave device bus,
Linus Walleij
[PATCH] iio: accel: fix Kconfig warning,
Linus Walleij
[PATCH v9 0/8] Add PWM and IIO timer drivers for STM32,
Benjamin Gaignard
- [PATCH v9 1/8] MFD: add bindings for STM32 Timers driver, Benjamin Gaignard
- [PATCH v9 6/8] IIO: add STM32 timer trigger driver, Benjamin Gaignard
- [PATCH v9 4/8] pwm: add driver for STM32 plaftorm, Benjamin Gaignard
- [PATCH v9 2/8] MFD: add STM32 Timers driver, Benjamin Gaignard
- [PATCH v9 8/8] ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco, Benjamin Gaignard
- [PATCH v9 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU, Benjamin Gaignard
- [PATCH v9 3/8] dt-bindings: pwm: Add STM32 bindings, Benjamin Gaignard
- [PATCH v9 5/8] IIO: add bindings for STM32 timer trigger driver, Benjamin Gaignard
- [GIT PULL] Immutable branch between MFD, ARM, IIO and PWM due for the v4.10 merge window, Lee Jones
[PATCH 0/2] iio: health: add MAX30102 oximeter driver support,
Matt Ranostay
[PATCH v2] iio: trigger: free trigger resource correctly,
Alison Schofield
[PATCH v3] iio: light: acpi-als: Properly enable on ASUS Zenbooks,
Josef Gajdusek
[PATCH 0/5] Add GPIO set_multiple callback support for ISA_BUS_API drivers,
William Breathitt Gray
[PATCH 0/7] Add support for triggered buffer mode to STM32 ADC,
Fabrice Gasnier
[PATCH 3/7] iio: adc: stm32: add trigger polarity extended attribute, Fabrice Gasnier
[PATCH 4/7] Documentation: dt: iio: stm32-adc: optional dma support, Fabrice Gasnier
[PATCH 7/7] ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-eval, Fabrice Gasnier
[PATCH 5/7] iio: adc: stm32: add optional dma support, Fabrice Gasnier
[PATCH 6/7] ARM: dts: stm32: Enable dma by default on stm32f4 adc, Fabrice Gasnier
[PATCH v2] iio: light: acpi-als: Properly enable on ASUS Zenbooks,
Josef Gajdusek
[PATCH] iio: dht11: Use usleep_range instead of msleep for start signal,
John Brooks
[PATCH] iio: light: acpi-als: Properly enable on ASUS Zenbooks,
Josef Gajdusek
[PATCH v5 0/2] iio: adc: Add Maxim MAX11100 driver,
Jacopo Mondi
[PATCH v8 00/12] mux controller abstraction and iio/i2c muxes,
Peter Rosin
- [PATCH v8 11/12] dt-bindings: simplified bindings for single-user gpio mux, Peter Rosin
- [PATCH v8 12/12] mux: support simplified bindings for single-user gpio mux, Peter Rosin
- [PATCH v8 08/12] i2c: i2c-mux-simple: new driver, Peter Rosin
- [PATCH v8 10/12] mux: adg792a: add mux controller driver for ADG792A/G, Peter Rosin
- [PATCH v8 09/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux, Peter Rosin
- [PATCH v8 05/12] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings, Peter Rosin
- [PATCH v8 01/12] devres: trivial whitespace fix, Peter Rosin
- [PATCH v8 03/12] mux: minimal mux subsystem and gpio-based mux controller, Peter Rosin
- [PATCH v8 06/12] iio: multiplexer: new iio category and iio-mux driver, Peter Rosin
- [PATCH v8 04/12] iio: inkern: api for manipulating ext_info of iio channels, Peter Rosin
- [PATCH v8 02/12] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio, Peter Rosin
- [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings, Peter Rosin
libgpiod v0.1: C library and command-line tools for controlling GPIOs,
Bartosz Golaszewski
[PATCH v8 0/8] Add PWM and IIO timer drivers for STM32,
Benjamin Gaignard
[PATCH] iio: trigger: free trigger resource correctly,
Alison Schofield
[PATCH] iio: imu: st_lsm6dsx: fix typo in gyro sensitivity definition,
Lorenzo Bianconi
[PATCH 1/3 v3] iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs,
Linus Walleij
[PATCH v3 3/3] iio: distance: srf08: add driver ABI documentation,
Andreas Klinger
[PATCH v3 2/3] iio: distance: srf08: add IIO driver for us ranger,
Andreas Klinger
[PATCH v3 0/3] iio: distance: srf08: add IIO driver for us ranger, Andreas Klinger
[PATCH v3 1/3] iio: distance: srf08: add trivial DT binding, Andreas Klinger
[PATCH v2 00/15] staging cleanups,
Brian Masney
- [PATCH v2 11/15] staging: iio: isl29028: remove unnecessary parenthesis, Brian Masney
- [PATCH v2 04/15] staging: iio: isl29028: change newlines to improve readability, Brian Masney
- [PATCH v2 03/15] staging: iio: isl29028: combine isl29028_proxim_get() and isl29028_read_proxim(), Brian Masney
- [PATCH v2 05/15] staging: iio: isl29028: remove unused define ISL29028_DEV_ATTR, Brian Masney
- [PATCH v2 06/15] staging: iio: isl29028: move failure logging into isl29028_set_proxim_sampling(), Brian Masney
- [PATCH v2 07/15] staging: iio: isl29028: move failure logging into isl29028_set_als_scale(), Brian Masney
- [PATCH v2 08/15] staging: iio: isl29028: made error messages consistent, Brian Masney
- [PATCH v2 09/15] staging: iio: isl29028: remove unnecessary error logging in isl29028_chip_init_and_power_on(), Brian Masney
- [PATCH v2 10/15] staging: iio: isl29028: remove out of memory log message, Brian Masney
- [PATCH v2 02/15] staging: iio: isl29028: fix alignment of function arguments, Brian Masney
- [PATCH v2 01/15] staging: iio: isl29028: made alignment of variables in struct isl29028_chip consistent, Brian Masney
- [PATCH v2 15/15] staging: iio: isl29028: add runtime power management support, Brian Masney
- [PATCH v2 12/15] staging: iio: isl29028: remove enable flag from isl29028_enable_proximity(), Brian Masney
- [PATCH v2 13/15] staging: iio: isl29028: only set proximity sampling rate when proximity is enabled, Brian Masney
- [PATCH v2 14/15] staging: iio: isl29028: only set ALS scale when ALS/IR sensing is enabled, Brian Masney
[PATCH] iio: health: max30100: fixed parenthesis around FIFO count check,
Matt Ranostay
[PATCH] iio: adc: palmas_gpadc: retrieve a valid iio_dev in suspend/resume,
Alison Schofield
[PATCH 1/3] iio: light: opt3001: Export OF device ID table as module aliases,
Javier Martinez Canillas
[PATCH] iio: health: max30100: use msleep() for long uncritical delays,
Nicholas Mc Guire
[PATCH v3 1/1] iio: adc: tlc4541: add support for TI tlc4541 adc,
Phil Reid
[PATCH] iio: bmi160: use variable names for sizeof() operator,
Alison Schofield
[PATCH V6] iio: adc: Add Renesas GyroADC driver,
Marek Vasut
[PATCH] iio: health: afe4404: retrieve a valid iio_dev in suspend/resume,
Alison Schofield
[PATCH] iio: health: afe4403: retrieve a valid iio_dev in suspend/resume,
Alison Schofield
[PATCH V5] iio: adc: Add Renesas GyroADC driver,
Marek Vasut
[PATCH v3] iio: max5481: Add support for Maxim digital potentiometers,
Slawomir Stepien
RE: [PATCH 3/4] iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs,
Heiner Kallweit
RE: [PATCH 4/4] ARM64: dts: meson: meson-gx: add the SAR ADC,
Heiner Kallweit
Using IIO for high-speed DAQ,
Matthias Klumpp
[PATCH v4 0/2] iio: adc: Add Maxim MAX11100 driver,
Jacopo Mondi
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
