Hi Icenowy,
On 02/04/2017 15:33, Icenowy Zheng wrote:
> As we have gained the support for the thermal sensor in H3, we can now
> add its device nodes to the device tree.
>
> Add them to the H3 device tree.
>
> The H5 thermal sensor has some differences, and will be added furtherly.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index b36f9f423c39..552217bb9266 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -72,6 +72,32 @@
> };
> };
>
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&ths>;
> + };
> +
> + soc {
> + ths: ths@01c25000 {
> + compatible = "allwinner,sun8i-h3-ths";
> + reg = <0x01c25000 0x100>;
> + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
> + clock-names = "bus", "ths";
> + resets = <&ccu RST_BUS_THS>;
> + #thermal-sensor-cells = <0>;
> + #io-channel-cells = <0>;
> + };
> + };
> +
> + thermal-zones {
> + cpu_thermal {
> + /* milliseconds */
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> + thermal-sensors = <&ths>;
> + };
Would it make sense to add the CPU temp trip points in this patch? Or do
we wait to have CPU OPPs and thermal throttling to add them?
I guess you can find them either in the datasheet or in vendor tree.
Thanks,
Quentin
--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
