Linux IIO Development

• Thread Index

• [v3 09/15] iio: adc: aspeed: Use devm_add_action_or_reset.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v3 04/15] iio: adc: aspeed: Keep model data to driver data.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v3 07/15] iio: adc: aspeed: Set num_channels with model data
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v3 00/15] Add support for ast2600 ADC
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v3 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v3 02/15] iio: adc: aspeed: completes the bitfield declare.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v3 03/15] iio: adc: aspeed: set driver data when adc probe.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• RE: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: IIO, dmabuf, io_uring
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: IIO, dmabuf, io_uring
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] iio: st_sensors: convert probe functions to full devm
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 5/5] iio: st_sensors: remove reference to parent device object on st_sensor_data
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH v2 4/5] iio: st_sensors: remove all driver remove functions
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH v2 3/5] iio: st_sensors: remove st_sensors_power_disable() function
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH v2 2/5] iio: st_sensors: remove st_sensors_deallocate_trigger() function
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH v2 1/5] iio: st_sensors: disable regulators after device unregistration
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH v2 0/5] iio: st_sensors: convert probe functions to full devm
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• Re: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 0/5] AD7949 Fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 3/5] iio: adc: ad7949: add vref selection support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• Re: [PATCH v7 08/13] iio: afe: rescale: fix precision on fractional log scale
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• [PATCH v6 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 5/5] iio: adc: ad7949: use devm managed functions
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 3/5] iio: adc: ad7949: add vref selection support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 4/5] dt-bindings: iio: adc: ad7949: update voltage reference bindings
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 1/5] iio: adc: ad7949: define and use bitfield names
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 0/5] AD7949 Fixes
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: IIO, dmabuf, io_uring
  • From: Christian König <christian.koenig@xxxxxxx>
• [PATCH v5] drivers/iio: Remove all strcpy() uses
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v15 09/13] counter: Implement signalZ_action_component_id sysfs attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v15 07/13] docs: counter: Document character device interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH v12 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v15 02/13] counter: Internalize sysfs interface code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio:adc:ad7124: Convert to fwnode handling of child node parsing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Renesas RZ/G2L ADC driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: pressure: hp03: update device probe to register with devm functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v12 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: accel: Add driver support for ADXL313
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] iio: accel: adxl355: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PULL] 1st set of IIO + counter new device support, cleanups etc for 5.15
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging:iio:ade7854 surround complex defines in parentheses
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] staging:iio:ade7854 surround complex defines in parentheses
  • From: daniel watson <ozzloy@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v12 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v3 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH v3 0/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Vacation 18-26th August, very slightly early IIO cut off for 5.15 as a result.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO + counter new device support, cleanups etc for 5.15
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: mtk-auxadc: add support IIO_CHAN_INFO_RAW case
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4] drivers/iio: Remove all strcpy() uses
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH v3] drivers/iio: Remove all strcpy() uses
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3] drivers/iio: Remove all strcpy() uses
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: IIO, dmabuf, io_uring
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: IIO, dmabuf, io_uring
  • From: Pavel Begunkov <asml.silence@xxxxxxxxx>
• Re: [PATCH v3 0/2] mfd: rn5t618: Extend ADC support
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• IIO, dmabuf, io_uring
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• RE: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH] iio: accel: adxl355: Add triggered buffer support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: accel: adxl355: Add triggered buffer support
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v8 3/3] iio: accel: adxl355: Add triggered buffer support
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: mtk-auxadc: add support IIO_CHAN_INFO_RAW case
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: accel: Add driver support for ADXL313
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH v1 1/2] iio: mtk-auxadc: add support IIO_CHAN_INFO_RAW case
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH v1 2/2] iio: mtk-auxadc: update case IIO_CHAN_INFO_PROCESSED
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH v1 0/2] AUXADC: Mediatek auxadc driver
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• Re: [PATCH v12 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH 2/2] iio: mtk-auxadc: update case IIO_CHAN_INFO_PROCESSED
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH 1/2] iio: mtk-auxadc: add support IIO_CHAN_INFO_RAW case
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: Drew Fustini <drew@xxxxxxxx>
• [PATCH v3 2/2] iio: accel: Add driver support for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• [PATCH v3 0/2] iio: accel: Add support for ADXL313 accelerometer
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v12 0/2] iio: accel: add support for ADXL355
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 0/1] Fix ltc2983 probing
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 1/1] iio: ltc2983: fix device probe
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• RE: [PATCH 1/1] iio: ltc2983: fix device probe
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• RE: [PATCH 1/1] iio: ltc2983: fix device probe
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH] iio: ad5770r: make devicetree property reading consistent
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v12 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v12 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v12 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v11 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v11 2/2] iio: accel: Add driver support for ADXL355
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH v11 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v11 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v11 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH 1/1] iio: ltc2983: fix device probe
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v10 2/2] iio: accel: Add driver support for ADXL355
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v10 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v10 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v10 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Len Baker <len.baker@xxxxxxx>
• [PATCH 1/1] iio: ltc2983: fix device probe
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 0/1] Fix ltc2983 probing
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH v9 2/2] iio: accel: Add driver support for ADXL355
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v9 1/2] iio: accel: Add driver support for ADXL355
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for 5.14
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Simon Xue <xxm@xxxxxxxxxxxxxx>
• [PATCH v2] iio: pressure: hp03: update device probe to register with devm functions
  • From: Théo Borém Fabris <theobf@xxxxxx>
• Re: [PATCH v5 1/5] iio: adc: ad7949: define and use bitfield names
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v9 0/2] iio: accel: add support for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v9 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v15 00/13] Introduce the Counter character device interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v15 01/13] counter: 104-quad-8: Describe member 'lock' in 'quad8'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO fixes for 5.14
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH v4 0/3] Renesas RZ/G2L ADC driver support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH v15 13/13] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 12/13] counter: 104-quad-8: Replace mutex with spinlock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 11/13] counter: Implement events_queue_size sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 10/13] counter: Implement *_component_id sysfs attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 09/13] counter: Implement signalZ_action_component_id sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 08/13] tools/counter: Create Counter tools
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 07/13] docs: counter: Document character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 06/13] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 05/13] counter: Move counter enums to uapi header
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 04/13] docs: counter: Update to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 03/13] counter: Update counter.h comments to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 01/13] counter: 104-quad-8: Describe member 'lock' in 'quad8'
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v15 00/13] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RESEND PATCH v9 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [RESEND PATCH v9 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [RESEND PATCH v9 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v2 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH v2 0/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: [PATCH v9 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v9 2/2] iio: accel: adxl355: Add triggered buffer support
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v9 2/2] iio: accel: adxl355: Add triggered buffer support
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v9 1/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v9 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v14 06/17] counter: Internalize sysfs interface code
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Fix the uninitialized use if regmap_read() fails
  • From: Yizhuo Zhai <yzhai003@xxxxxxx>
• [PATCH v3] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Simon Xue <xxm@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/5] iio: adc: ad7949: define and use bitfield names
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Fix the uninitialized use if regmap_read() fails
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-press: Add timestamp channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 05/17] counter: Rename counter_count_function to counter_function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 04/17] counter: Rename counter_signal_value to counter_signal_level
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 03/17] counter: Standardize to ERANGE for limit exceeded errors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 02/17] counter: Return error code on invalid modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 01/17] counter: 104-quad-8: Return error when invalid mode during ceiling_write
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/5] iio: adc: ad7949: define and use bitfield names
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 0/3] Renesas RZ/G2L ADC driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: hp03: update device probe to register with devm functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: temperature: add MAXIM max31865 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: temperature: Add MAX31865 RTD Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] iio: accel: bmc150: Add support for INT2 and BMC156
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: accel: adxl355: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: accel: adxl355: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/3] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL313
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: chemical: Add driver support for sgp40
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/7] iio: ep93xx: Prepare clock before using it
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: fsl-imx25-gcq: fix the right check and simplify code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: pressure: hp03: update device probe to register with devm functions
  • From: Théo Borém Fabris <theobf@xxxxxx>
• [PATCH v5 5/5] iio: adc: ad7949: use devm managed functions
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v5 4/5] dt-bindings: iio: adc: ad7949: add per channel reference
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v5 1/5] iio: adc: ad7949: define and use bitfield names
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v5 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v5 0/5] AD7949 Fixes
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH v2] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• RE: iio: temperature: ltc2983 probe failure
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [PATCH 0/2] iio: potentiometer: Add driver support for AD5110
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• [Bug 213979] needs unknown symbol errors building cros_ec_sensors_core
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• iio: temperature: ltc2983 probe failure
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: iio: accel: bma255: Add interrupt-names
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: cros_ec: Fix Kconfig dependency on CROS_EC_SENSORHUB
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: cros_ec: Fix Kconfig dependency on CROS_EC_SENSORHUB
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: cros_ec: Fix Kconfig dependency on CROS_EC_SENSORHUB
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v2] iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe
  • From: Simon Xue <xxm@xxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v1] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: Simon Xue <xxm@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] iio: accel: Add driver support for ADXL355
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 00/17] iio:adc:ad7280a Cleanup and proposed staging graduation.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL313
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v2 2/2] iio: accel: Add driver support for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• [PATCH v2 0/2] iio: accel: Add support for ADXL313 accelerometer
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• [Bug 213979] New: needs unknown symbol errors building cros_ec_sensors_core
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 00/17] iio:adc:ad7280a Cleanup and proposed staging graduation.
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: chemical: Add driver support for sgp40
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] Renesas RZ/G2L ADC driver support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 1/2] iio: temperature: Add MAX31865 RTD Support
  • From: Navin Sankar Velliangiri <navin@xxxxxxxxxxx>
• [PATCH v2 2/2] iio: chemical: Add driver support for sgp40
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: chemical: Add trivial DT binding for sgp40
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: chemical: Add support for sgp40 gas sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: temperature: add MAXIM max31865 support
  • From: Navin Sankar Velliangiri <navin@xxxxxxxxxxx>
• [PATCH v8 3/3] iio: accel: adxl355: Add triggered buffer support
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v8 2/3] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v8 0/3] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/8] arm: ep93xx: CCF conversion
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: adc: Fix flags in sigma-delta drivers
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v14 17/17] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 16/17] counter: 104-quad-8: Replace mutex with spinlock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 15/17] counter: Implement events_queue_size sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 14/17] counter: Implement *_component_id sysfs attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 13/17] counter: Implement signalZ_action_component_id sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 12/17] tools/counter: Create Counter tools
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 11/17] docs: counter: Document character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 10/17] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 09/17] counter: Move counter enums to uapi header
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 08/17] docs: counter: Update to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 07/17] counter: Update counter.h comments to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 05/17] counter: Rename counter_count_function to counter_function
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 04/17] counter: Rename counter_signal_value to counter_signal_level
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 03/17] counter: Standardize to ERANGE for limit exceeded errors
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 02/17] counter: Return error code on invalid modes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 01/17] counter: 104-quad-8: Return error when invalid mode during ceiling_write
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v14 00/17] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 0/3] iio: adc: Fix flags in sigma-delta drivers
  • From: <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: adc: ad7949: add per channel reference
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: chemical: Add trivial DT binding for sgp40
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• Re: [PATCH 1/1] iio adc: add driver for Texas Instruments TLA2528 adc
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/1] iio adc: add driver for Texas Instruments TLA2528 adc
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 4/4] iio: accel: bmc150: Add support for BMC156
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 3/4] iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 0/4] iio: accel: bmc150: Add support for INT2 and BMC156
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: iio: accel: bma255: Add interrupt-names
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH 1/1] iio adc: add driver for Texas Instruments TLA2528 adc
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] iio adc: add driver for Texas Instruments TLA2528 adc
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 1/1] iio adc: add driver for Texas Instruments TLA2528 adc
  • From: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
• [PATCH 0/1] V2 driver for Texas Instruments TLA2528
  • From: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v2] iio: adc: fsl-imx25-gcq: fix the right check and simplify code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: fsl-imx25-gcq: fix the right check andsimplify code
  • From: tangbin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers iio/adc: add driver for Texas Instruments TLA2528 adc
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: ACPI Ambient Light Sensor Events
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] drivers iio/adc: add driver for Texas Instruments TLA2528 adc
  • From: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: fsl-imx25-gcq: fix the right check and simplify code
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v7 08/13] iio: afe: rescale: fix precision on fractional log scale
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] iio: adc: rockchip_saradc: just get referenced voltage once at probe
  • From: Simon Xue <xxm@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] iio: ep93xx: Prepare clock before using it
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: temperature: Add MAX31865 RTD Support
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: adc: fsl-imx25-gcq: fix the right check and simplify code
  • From: tangbin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• ACPI Ambient Light Sensor Events
  • From: Morgan Hager <morgan.hager1@xxxxxxxxx>
• Re: [PATCH v4 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v4 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH v7 12/13] dt-bindings: iio: afe: add bindings for temperature-sense-rtd
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 13/13] dt-bindings: iio: afe: add bindings for temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 11/13] iio: afe: rescale: add temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 10/13] iio: afe: rescale: add RTD temperature sensor support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 09/13] iio: test: add basic tests for the iio-rescale driver
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 07/13] iio: afe: rescale: reduce risk of integer overflow
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 08/13] iio: afe: rescale: fix precision on fractional log scale
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 03/13] iio: inkern: make a best effort on offset calculation
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 06/13] iio: afe: rescale: add offset support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 04/13] iio: afe: rescale: expose scale processing function
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 02/13] iio: inkern: apply consumer scale when no channel scale is available
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 01/13] iio: inkern: apply consumer scale on IIO_VAL_INT cases
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v7 00/13] iio: afe: add temperature rescaling support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: temperature: add MAXIM max31865 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: temperature: Add MAX31865 RTD Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] drivers/iio: Remove all strcpy() uses in favor of strscpy()
  • From: Len Baker <len.baker@xxxxxxx>
• Re: [PATCH 2/2] iio: chemical: Add driver support for sgp40
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 1/2] iio: temperature: Add MAX31865 RTD Support
  • From: Navin Sankar Velliangiri <navin@xxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: temperature: add MAXIM max31865 support
  • From: Navin Sankar Velliangiri <navin@xxxxxxxxxxx>
• Re: [PATCH v7 3/3] iio: accel: adxl355: Add triggered buffer support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v7 2/3] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v7 3/3] iio: accel: adxl355: Add triggered buffer support
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v7 0/3] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH 0/8] arm: ep93xx: CCF conversion
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2] iio: accel: Add driver support for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: accel: Add binding documentation for ADXL313
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• [PATCH 0/2] iio: accel: Add support for ADXL313 accelerometer
  • From: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 2/2] iio: chemical: Add driver support for sgp40
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: accel: bmc150: Add support for BMC156
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: mtk-auxadc: add mutex_destroy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/4] iio: st_sensors: convert probe functions to full devm
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v2 1/8] dt-bindings: iio: adc: rename the aspeed adc yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: dac: max5821: convert device register to device managed function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: fsl-imx25-gcq: fix the right check and simplify code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: chemical: Add driver support for sgp40
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: adc: ad7949: add per channel reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/5] iio: adc: ad7949: add support for internal vref
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] iio: sx9310: Support ACPI property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: adc: Fix flags in sigma-delta drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix incorrect exit of for-loop
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: hid-sensor-press: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v1] iio: mtk-auxadc: add mutex_destroy
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: IRQ related query
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: IRQ related query
  • From: Patrick Regnouf <patrick@xxxxxxxxxxxxxx>
• Re: IRQ related query
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: IRQ related query
  • From: patrick@xxxxxxxxxxxxxx
• [PATCH] iio: adc: Fix incorrect exit of for-loop
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: IRQ related query
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mfd: Convert ti-tsc-adc bindings to YAML schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: ti,dac5571: Add TI DAC081C081 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [v2 1/8] dt-bindings: iio: adc: rename the aspeed adc yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5] iio: sx9310: Support ACPI property
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v6 09/13] iio: afe: rescale: fix precision on fractional log scale
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v6 08/13] iio: afe: rescale: reduce risk of integer overflow
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• IRQ related query
  • From: Patrick Regnouf <patrick@xxxxxxxxxxxxxx>
• Re: [PATCH v13 00/17] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 3/3] iio: adc: ad7923: Fix IRQ flag
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH 2/3] iio: adc: ad7780: Fix IRQ flag
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH 1/3] iio: adc: ad7192: Fix IRQ flag
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH 0/3] iio: adc: Fix flags in sigma-delta drivers
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH v1 0/1] AUXADC: Mediatek auxadc driver
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH v1] iio: mtk-auxadc: add mutex_destroy
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH v5] iio: sx9310: Support ACPI property
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: light: cm3323: Add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] drivers: iio: light: cm3323: Add device tree support
  • From: Siddharth Manthan <siddharth.manthan@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: Add bindings for Capella cm3323 Ambient Light Sensor
  • From: Siddharth Manthan <siddharth.manthan@xxxxxxxxx>
• Re: Backport commit a2d2010d95cd (iio: dac: ds4422/ds4424 drop of_node check) to Linux 4.19
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Backport commit a2d2010d95cd (iio: dac: ds4422/ds4424 drop of_node check) to Linux 4.19
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH v13 00/17] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v6 09/13] iio: afe: rescale: fix precision on fractional log scale
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6 08/13] iio: afe: rescale: reduce risk of integer overflow
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v6 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v6 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v6 09/13] iio: afe: rescale: fix precision on fractional log scale
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v6 08/13] iio: afe: rescale: reduce risk of integer overflow
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• [PATCH v4 5/5] iio: adc: ad7949: use devm managed functions
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: iio: adc: ad7949: add per channel reference
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v4 3/5] iio: adc: ad7949: add support for internal vref
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v4 1/5] iio: adc: ad7949: define and use bitfield names
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v4 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v4 0/5] AD7949 Fixes
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH 2/2] iio: chemical: Add driver support for sgp40
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: ad7949: add support for internal vref
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: adc: ad7949: fix spi messages on non 14-bit controllers
  • From: "Liam Beguin" <liambeguin@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Seeking documentation
  • From: Patrick Regnouf <patrick@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: accel: bmc150: Add support for BMC156
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio:adc:ad7124: Convert to fwnode handling of child node parsing.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/2] iio: chemical: Add driver support for sgp40
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: chemical: Add trivial DT binding for sgp40
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/2] iio: chemical: Add support for sgp40 gas sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio:adc:ad7124: Convert to fwnode handling of child node parsing.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v5 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v5 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH 2/2] iio:adc:ad7124: Convert to fwnode handling of child node parsing.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: adc: fsl-imx25-gcq: fix the right check and simplify code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: accel: Add driver support for ADXL355
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 11/15] dt-bindings: iio: dac: ad5761: Add missing binding doc.
  • From: Ricardo Ribalda Delgado <ribalda@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v4 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: accel: Add DT binding doc for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v3 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: renesas: r9a07g044: Add ADC node
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] Renesas RZ/G2L ADC driver support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH v2 1/8] iio: ep93xx: Prepare clock before using it
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• [PATCH v2 0/8] arm: ep93xx: CCF conversion
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• [PATCH 0/8] arm: ep93xx: CCF conversion
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• [PATCH 1/8] iio: ep93xx: Prepare clock before using it
  • From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
• [PATCH] dt-bindings: mfd: Convert ti-tsc-adc bindings to YAML schema
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v4 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v4 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v4 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v4 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v4 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• Re: [v2 2/8] dt-bindings: iio: adc: Binding ast2600 adc.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] iio: st_sensors: remove all driver remove functions
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 4/4] iio: st_sensors: remove reference to parent device object on st_sensor_data
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH 3/4] iio: st_sensors: remove all driver remove functions
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH 2/4] iio: st_sensors: remove st_sensors_power_disable() function
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH 1/4] iio: st_sensors: remove st_sensors_deallocate_trigger() function
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH 0/4] iio: st_sensors: convert probe functions to full devm
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• Re: [v2 8/8] iio: adc: aspeed: Support battery sensing.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: dac: max5821: convert device register to device managed function
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [v2 1/8] dt-bindings: iio: adc: rename the aspeed adc yaml
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] iio: pressure: st_pressure: use devm_iio_triggered_buffer_setup() for buffer
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio:adc:ad7124: Convert to fwnode handling of child node parsing.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] iio:adc:ad7124: Convert to fwnode handling of child node parsing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio:adc:ad7124: Parse configuration into correct local config structure.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] iio:adc:ad7124: Convert to generic firmware handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/4] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: adc: meson-saradc: Three small improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dac: max5821: convert device register to device managed function
  • From: Théo Borém Fabris <theobf@xxxxxx>
• [PATCH v2] iio: dac: max5821: convert device register to device managed function
  • From: Théo Borém Fabris <theobf@xxxxxx>
• [PATCH v3 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v3 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v3 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v3 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v3 0/4] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v3 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: Add driver for Renesas RZ/G2L A/D converter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: mtk-auxadc: add mutex_destroy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: humidity: hdc100x: Add margin to the conversion time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: fix i2c dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v1 0/7] Add support for ast2600 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: accel: bmc150: Add support for BMC156
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: accel: bma255: Add interrupt-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: Add ADXL355 in trivial-devices
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Fix the uninitialized use if regmap_read() fails
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: pressure: st_pressure: use devm_iio_triggered_buffer_setup() for buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: fsl-imx25-gcq: Use the defined variable to clean code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: fix i2c dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: vcnl3020: add periodic mode, threshold options
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: proximity: vcnl3020: add periodic mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 07/13] iio: test: add basic tests for the iio-rescale driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 13/13] dt-bindings: iio: afe: add bindings for temperature transducers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 15/54] dt-bindings: iio: st: Remove wrong items length check
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 15/54] dt-bindings: iio: st: Remove wrong items length check
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 09/13] iio: afe: rescale: fix precision on fractional log scale
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6 08/13] iio: afe: rescale: reduce risk of integer overflow
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: ti,dac5571: Add TI DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] iio: ti-dac5571: Add TI DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: Add ADXL355 in trivial-devices
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [v2 8/8] iio: adc: aspeed: Support battery sensing.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [v2 6/8] iio: adc: aspeed: Add compensation phase.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [v2 5/8] iio: adc: aspeed: Add func to set sampling rate.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [v2 4/8] iio: adc: aspeed: Allow driver to support ast2600
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [v2 3/8] iio: adc: aspeed: completes the bitfield declare.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [v2 2/8] dt-bindings: iio: adc: Binding ast2600 adc.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [v2 1/8] dt-bindings: iio: adc: rename the aspeed adc yaml
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH V2 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH V2 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH V2 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• [v2 8/8] iio: adc: aspeed: Support battery sensing.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 7/8] iio: adc: aspeed: Fix the calculate error of clock.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 3/8] iio: adc: aspeed: completes the bitfield declare.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 4/8] iio: adc: aspeed: Allow driver to support ast2600
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 6/8] iio: adc: aspeed: Add compensation phase.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 5/8] iio: adc: aspeed: Add func to set sampling rate.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 0/8] Add support for ast2600 ADC
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 2/8] dt-bindings: iio: adc: Binding ast2600 adc.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [v2 1/8] dt-bindings: iio: adc: rename the aspeed adc yaml
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [PATCH v5 2/3] iio: proximity: vcnl3020: add periodic mode
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v5 3/3] iio: proximity: vcnl3020: remove iio_claim/release_direct
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v5 1/3] iio: proximity: vcnl3020: add DMA safe buffer
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v5 0/3] iio: vcnl3020: add periodic mode, threshold options
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v2 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: accel: Add ADXL355 in trivial-devices
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v2 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Christophe Branchereau <cbranchereau@xxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: fix i2c dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH 5/6] iio/adc: ingenic: modify
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio/adc: ingenic: add JZ4760B support to the sadc driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: fix i2c dependency
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: fix i2c dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: fix i2c dependency
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: accel: fxls8962af: fix i2c dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: Add driver support for ADXL355
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 15/54] dt-bindings: iio: st: Remove wrong items length check
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: Add driver support for ADXL355
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md
  • From: citral23 <cbranchereau@xxxxxxxxx>
• [PATCH 5/6] iio/adc: ingenic: modify
  • From: citral23 <cbranchereau@xxxxxxxxx>
• [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the
  • From: citral23 <cbranchereau@xxxxxxxxx>
• [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  • From: citral23 <cbranchereau@xxxxxxxxx>
• [PATCH 4/6] iio/adc: ingenic: add JZ4760B support to the sadc driver
  • From: citral23 <cbranchereau@xxxxxxxxx>
• [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  • From: citral23 <cbranchereau@xxxxxxxxx>
• [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  • From: citral23 <cbranchereau@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: Add driver support for ADXL355
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v1 2/2] iio: accel: Add driver support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: iio: accel: Add ADXL355 in trivial-devices
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v1 0/2] iio: accel: add support for ADXL355
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH] iio: dac: max5821: convert device register to device managed function
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v6 11/13] iio: afe: rescale: add temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 10/13] iio: afe: rescale: add RTD temperature sensor support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 04/13] iio: afe: rescale: expose scale processing function
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 06/13] iio: afe: rescale: add offset support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 13/13] dt-bindings: iio: afe: add bindings for temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 12/13] dt-bindings: iio: afe: add bindings for temperature-sense-rtd
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 09/13] iio: afe: rescale: fix precision on fractional log scale
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 08/13] iio: afe: rescale: reduce risk of integer overflow
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 07/13] iio: test: add basic tests for the iio-rescale driver
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 05/13] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 02/13] iio: inkern: apply consumer scale when no channel scale is available
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 03/13] iio: inkern: make a best effort on offset calculation
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 01/13] iio: inkern: apply consumer scale on IIO_VAL_INT cases
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v6 00/13] iio: afe: add temperature rescaling support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH] iio: dac: max5821: convert device register to device managed function
  • From: Théo Borém Fabris <theobf@xxxxxx>
• Re: [PATCH 3/4] iio: accel: bmc150: Make it possible to configure INT2 instead of INT1
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v6 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: frequency: adrf6780: add support for ADRF6780
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v6 2/2] dt-bindings: iio: frequency: add adrf6780 doc
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>