From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
The driver previously supported using GPIO requests to retrieve
multiple interrupt lines. As existing firmware may be using
this method, we need to continue to support it. However, that doesn't
stop us also supporting just getting irqs directly.
The handling of irqflags has to take into account the fact that using
a GPIO method to identify the interrupt does not convey direction of
the trigger that fwnode_irq_get() will. So we need to set the
IRQF_TRIGGER_RISING in that path but not otherwise, where it will
cause an issue if we reprobe the driver after removal.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/accel/mma9551.c | 30 ++++++++++--------------------
1 file changed, 10 insertions(+), 20 deletions(-)
diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c
index 1b4a8b27f14a..537a7a04654a 100644
--- a/drivers/iio/accel/mma9551.c
+++ b/drivers/iio/accel/mma9551.c
@@ -19,7 +19,7 @@
#define MMA9551_DRV_NAME "mma9551"
#define MMA9551_IRQ_NAME "mma9551_event"
-#define MMA9551_GPIO_COUNT 4
+#define MMA9551_IRQ_COUNT 4
/* Tilt application (inclination in IIO terms). */
#define MMA9551_TILT_XZ_ANG_REG 0x00
@@ -46,7 +46,7 @@ struct mma9551_data {
struct i2c_client *client;
struct mutex mutex;
int event_enabled[3];
- int irqs[MMA9551_GPIO_COUNT];
+ int irqs[MMA9551_IRQ_COUNT];
};
static int mma9551_read_incli_chan(struct i2c_client *client,
@@ -400,36 +400,26 @@ static int mma9551_init(struct mma9551_data *data)
return mma9551_set_device_state(data->client, true);
}
-static int mma9551_gpio_probe(struct iio_dev *indio_dev)
+static int mma9551_irq_probe(struct iio_dev *indio_dev)
{
- struct gpio_desc *gpio;
int i, ret;
struct mma9551_data *data = iio_priv(indio_dev);
struct device *dev = &data->client->dev;
- for (i = 0; i < MMA9551_GPIO_COUNT; i++) {
- gpio = devm_gpiod_get_index(dev, NULL, i, GPIOD_IN);
- if (IS_ERR(gpio)) {
- dev_err(dev, "acpi gpio get index failed\n");
- return PTR_ERR(gpio);
- }
-
- ret = gpiod_to_irq(gpio);
- if (ret < 0)
+ for (i = 0; i < MMA9551_IRQ_COUNT; i++) {
+ ret = fwnode_irq_get(dev_fwnode(dev), i);
+ if (ret)
return ret;
data->irqs[i] = ret;
ret = devm_request_threaded_irq(dev, data->irqs[i],
- NULL, mma9551_event_handler,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- MMA9551_IRQ_NAME, indio_dev);
+ NULL, mma9551_event_handler,
+ IRQF_ONESHOT,
+ MMA9551_IRQ_NAME, indio_dev);
if (ret < 0) {
dev_err(dev, "request irq %d failed\n", data->irqs[i]);
return ret;
}
-
- dev_dbg(dev, "gpio resource, no:%d irq:%d\n",
- desc_to_gpio(gpio), data->irqs[i]);
}
return 0;
@@ -466,7 +456,7 @@ static int mma9551_probe(struct i2c_client *client,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &mma9551_info;
- ret = mma9551_gpio_probe(indio_dev);
+ ret = mma9551_irq_probe(indio_dev);
if (ret < 0)
goto out_poweroff;
--
2.33.0
