Re: [PATCH v3 28/47] mfd: ti_am335x_tscadc: Drop useless definitions from the header

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 15 Sep 2021 17:58:49 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:

> Drop unused and useless definitions from the header. Besides the STEP
> ENABLE register which is highly unclear (and not used), drop all the

Agreed - I started trying to figure out what they were in the earlier patch!

> "masks" definitions which are only used by the following definition. It
> could be possible to got even further by removing these definitions
> entirely and use FIELD_PREP() macros from the code directly, but while I
> have no troubles making these changes in the header, changing the values
> in the code directly could IMHO darkening a bit the logic and
> furthermore hardening future git-blames.

Hmm. Maybe on that...  I'm not that bothered either way but there is
definitely clarity in FIELD_PREP being used inline for writes to a device.
You can very clearly see what is going on.

Note that it only really works here because the driver only ever uses
the masks to 'set' the value, but never to read any of them back from the
hardware.

Your point about it making a messy history is true of almost any change :)

> 
> Certain macros are using GENMASK() to define the value of a particular
> field, while this is purely "by chance" that the value and the mask have
> the same value. In this case, drop the "mask" definition, use
> FIELD_PREP() and GENMASK() in the macro defining the field, and use the
> new macro to define the particular value by feeding directly the actual
> number advertised in the datasheet into that macro, as in:
> 	-#define STEPCONFIG_RFM_VREFN   GENMASK(24, 23)
> 	-#define STEPCONFIG_RFM(val)    FIELD_PREP(STEPCONFIG_RFM_VREFN, (val))
> 	+#define STEPCONFIG_RFM(val)    FIELD_PREP(GENMASK(24, 23), (val))
> 	+#define STEPCONFIG_RFM_VREFN   STEPCONFIG_RFM(3)

This is indeed an improvement.

> 
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>

I'm a bit in two minds out about how you should handle the multiple patches
involved in cleaning these up.   Definitely not good to do modifications on
elements you are going to drop - so for those pull them out earlier.

The others are a little odd because you first introduce some of the GENMASK stuff
then rework it in this patch.  Perhaps this split is the best way to handle those.


Jonathan


> ---
>  include/linux/mfd/ti_am335x_tscadc.h | 51 +++++++++-------------------
>  1 file changed, 16 insertions(+), 35 deletions(-)
> 
> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
> index babc2e36c5d0..32b26e56eebb 100644
> --- a/include/linux/mfd/ti_am335x_tscadc.h
> +++ b/include/linux/mfd/ti_am335x_tscadc.h
> @@ -40,13 +40,6 @@
>  /* IRQ wakeup enable */
>  #define IRQWKUP_ENB		BIT(0)
>  
> -/* Step Enable */
> -#define STEPENB_MASK		GENMASK(16, 0)
> -#define STEPENB(val)		FIELD_PREP(STEPENB_MASK, (val))
> -#define ENB(val)		BIT(val)
> -#define STPENB_STEPENB		STEPENB(GENMASK(16, 0))
> -#define STPENB_STEPENB_TC	STEPENB(GENMASK(12, 0))
> -

With this first block moved much earlier in the series - to before
any of the other patches touch it.

Reviwed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

>  /* IRQ enable */
>  #define IRQENB_HW_PEN		BIT(0)
>  #define IRQENB_EOS		BIT(1)
> @@ -59,12 +52,10 @@
>  #define IRQENB_PENUP		BIT(9)
>  
>  /* Step Configuration */
> -#define STEPCONFIG_MODE_MASK	GENMASK(1, 0)
> -#define STEPCONFIG_MODE(val)	FIELD_PREP(STEPCONFIG_MODE_MASK, (val))
> +#define STEPCONFIG_MODE(val)	FIELD_PREP(GENMASK(1, 0), (val))
>  #define STEPCONFIG_MODE_SWCNT	STEPCONFIG_MODE(1)
>  #define STEPCONFIG_MODE_HWSYNC	STEPCONFIG_MODE(2)
> -#define STEPCONFIG_AVG_MASK	GENMASK(4, 2)
> -#define STEPCONFIG_AVG(val)	FIELD_PREP(STEPCONFIG_AVG_MASK, (val))
> +#define STEPCONFIG_AVG(val)	FIELD_PREP(GENMASK(4, 2), (val))
>  #define STEPCONFIG_AVG_16	STEPCONFIG_AVG(4)
>  #define STEPCONFIG_XPP		BIT(5)
>  #define STEPCONFIG_XNN		BIT(6)
> @@ -72,45 +63,36 @@
>  #define STEPCONFIG_YNN		BIT(8)
>  #define STEPCONFIG_XNP		BIT(9)
>  #define STEPCONFIG_YPN		BIT(10)
> -#define STEPCONFIG_RFP_VREFP	GENMASK(13, 12)
> -#define STEPCONFIG_RFP(val)	FIELD_PREP(STEPCONFIG_RFP_VREFP, (val))
> -#define STEPCONFIG_INM_MASK	GENMASK(18, 15)
> -#define STEPCONFIG_INM(val)	FIELD_PREP(STEPCONFIG_INM_MASK, (val))
> +#define STEPCONFIG_RFP(val)	FIELD_PREP(GENMASK(13, 12), (val))
> +#define STEPCONFIG_RFP_VREFP	STEPCONFIG_RFP(3)
> +#define STEPCONFIG_INM(val)	FIELD_PREP(GENMASK(18, 15), (val))
>  #define STEPCONFIG_INM_ADCREFM	STEPCONFIG_INM(8)
> -#define STEPCONFIG_INP_MASK	GENMASK(22, 19)
> -#define STEPCONFIG_INP(val)	FIELD_PREP(STEPCONFIG_INP_MASK, (val))
> +#define STEPCONFIG_INP(val)	FIELD_PREP(GENMASK(22, 19), (val))
>  #define STEPCONFIG_INP_AN4	STEPCONFIG_INP(4)
>  #define STEPCONFIG_INP_ADCREFM	STEPCONFIG_INP(8)
>  #define STEPCONFIG_FIFO1	BIT(26)
> -#define STEPCONFIG_RFM_VREFN	GENMASK(24, 23)
> -#define STEPCONFIG_RFM(val)	FIELD_PREP(STEPCONFIG_RFM_VREFN, (val))
> +#define STEPCONFIG_RFM(val)	FIELD_PREP(GENMASK(24, 23), (val))
> +#define STEPCONFIG_RFM_VREFN	STEPCONFIG_RFM(3)
>  
>  /* Delay register */
> -#define STEPDELAY_OPEN_MASK	GENMASK(17, 0)
> -#define STEPDELAY_OPEN(val)	FIELD_PREP(STEPDELAY_OPEN_MASK, (val))
> +#define STEPDELAY_OPEN(val)	FIELD_PREP(GENMASK(17, 0), (val))
>  #define STEPCONFIG_OPENDLY	STEPDELAY_OPEN(0x098)
> -#define STEPDELAY_SAMPLE_MASK	GENMASK(31, 24)
> -#define STEPDELAY_SAMPLE(val)	FIELD_PREP(STEPDELAY_SAMPLE_MASK, (val))
>  #define STEPCONFIG_MAX_OPENDLY	GENMASK(17, 0)
> +#define STEPDELAY_SAMPLE(val)	FIELD_PREP(GENMASK(31, 24), (val))
>  #define STEPCONFIG_SAMPLEDLY	STEPDELAY_SAMPLE(0)
>  #define STEPCONFIG_MAX_SAMPLE	GENMASK(7, 0)
>  
>  /* Charge Config */
> -#define STEPCHARGE_RFP_MASK	GENMASK(14, 12)
> -#define STEPCHARGE_RFP(val)	FIELD_PREP(STEPCHARGE_RFP_MASK, (val))
> +#define STEPCHARGE_RFP(val)	FIELD_PREP(GENMASK(14, 12), (val))
>  #define STEPCHARGE_RFP_XPUL	STEPCHARGE_RFP(1)
> -#define STEPCHARGE_INM_MASK	GENMASK(18, 15)
> -#define STEPCHARGE_INM(val)	FIELD_PREP(STEPCHARGE_INM_MASK, (val))
> +#define STEPCHARGE_INM(val)	FIELD_PREP(GENMASK(18, 15), (val))
>  #define STEPCHARGE_INM_AN1	STEPCHARGE_INM(1)
> -#define STEPCHARGE_INP_MASK	GENMASK(22, 19)
> -#define STEPCHARGE_INP(val)	FIELD_PREP(STEPCHARGE_INP_MASK, (val))
> -#define STEPCHARGE_RFM_MASK	GENMASK(24, 23)
> -#define STEPCHARGE_RFM(val)	FIELD_PREP(STEPCHARGE_RFM_MASK, (val))
> +#define STEPCHARGE_INP(val)	FIELD_PREP(GENMASK(22, 19), (val))
> +#define STEPCHARGE_RFM(val)	FIELD_PREP(GENMASK(24, 23), (val))
>  #define STEPCHARGE_RFM_XNUR	STEPCHARGE_RFM(1)
>  
>  /* Charge delay */
> -#define CHARGEDLY_OPEN_MASK	GENMASK(17, 0)
> -#define CHARGEDLY_OPEN(val)	FIELD_PREP(CHARGEDLY_OPEN_MASK, (val))
> +#define CHARGEDLY_OPEN(val)	FIELD_PREP(GENMASK(17, 0), (val))
>  #define CHARGEDLY_OPENDLY	CHARGEDLY_OPEN(0x400)
>  
>  /* Control register */
> @@ -118,8 +100,7 @@
>  #define CNTRLREG_STEPID		BIT(1)
>  #define CNTRLREG_STEPCONFIGWRT	BIT(2)
>  #define CNTRLREG_POWERDOWN	BIT(4)
> -#define CNTRLREG_AFE_CTRL_MASK	GENMASK(6, 5)
> -#define CNTRLREG_AFE_CTRL(val)	FIELD_PREP(CNTRLREG_AFE_CTRL_MASK, (val))
> +#define CNTRLREG_AFE_CTRL(val)	FIELD_PREP(GENMASK(6, 5), (val))
>  #define CNTRLREG_4WIRE		CNTRLREG_AFE_CTRL(1)
>  #define CNTRLREG_5WIRE		CNTRLREG_AFE_CTRL(2)
>  #define CNTRLREG_8WIRE		CNTRLREG_AFE_CTRL(3)




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux